Epson Perfection 4990 Series
Scanner Parts Scanner Specifications
Document
] Start button
mat
Transportation
lock
Document
table
Basic Specifications
Scanner type Flatbed, color
Photoelectric Color CCD line sensor
device
Effective pixels 40,800 × 56,160 pixels at 4800 dpi
Maximum US letter or A4 size
document size (8.5 × 11.7 inches [216 × 297 mm])
Optical resolution 4800 dpi
P Power button
IEEE 1394 port
Indicator
light
USB port
Carriage and
lamp (in the
home position)
Transparency unit
(TPU) connector
Transparency unit
(TPU) under lid
Maximum 4800 dpi (main scan) × 9600 dpi hardware
resolution* (sub scan)
* The maximum hardware resolution of 4800 × 9600 dpi is achieved
using Epson’s Micro Step Drive
™
technology.
Maximum 12,800 dpi
interpolated
resolution
Output resolution 25 to 12,800 dpi (25 to 6400 dpi in 1 dpi
increments; 12800 dpi performed with
zoom function)
Speed (color) 12.3 msec/line at 4800 dpi
3.1 msec/line at 600 dpi
Pixel depth 16 bits per pixel (input and output)
Brightness 7 levels (in EPSON Scan, gamma
correction controls brightness)
Interface
USB 1.1/2.0 (Type B receptacle connector)
IEEE 1394 (FireWire
)
Light source White cold cathode fluorescent lamp
Dimensions Width: 12.0 inches (30.4 cm)
Depth: 18.7 inches (47.6 cm)
Height: 5.3 inches (13.4 cm)
Power cord
Weight Approx. 14.8 lb (6.7 kg)
Transparency unit
(TPU) progress light
Transportation lock
(in unlocked position)
10/04 Epson Perfection 4990 Series - 1
Epson Perfection 4990 Series
Electrical
Input voltage 100-120 VAC ± 10%
range
Rated frequency 50 to 60Hz
Rated input 0.7 A
current
Power Approx. 27 W operating
consumption Approx. 18 W in stand-by mode
Approx. 4.8 W in sleep mode
Note:
Scanners sold outside the US market may operate at a different
voltage. Check the label on the back of the scanner for voltage
information.
Environmental
Temperature Operation: 41 to 95 °F (5 to 35 °C)
Storage: –13 to 140 °F (–25 to 60 °C)
Humidity Operation: 10% to 80%
(without Storage: 10% to 85%
condensation)
Operating Ordinary office or home conditions; avoid
conditions extreme dust, direct sunlight, and strong
light sources.
Safety Approvals
Safety UL 60950
CSA C22.2 No. 60950
EMC FCC part 15 subpart B class B
CAN/CSA-CEI/IEC CISPR 22
Transparency Unit
The transparency unit is built into the scanner lid.
Rated voltage DC 24 V ±10%, DC 5 V ±5%
Document Positive or negative film in the following
specifications sizes:
35mm filmstrips (24 frames)
35mm slides (8 slides)
120/220 (6 × 12 cm) film (3 frames)
4 × 5-inch film (2 frames)
Contact sheets and transparencies up to
8 × 10 inches
Readable area 5.7 × 9.1 inches (144 × 231 mm, default
when using film holders)
8 × 10 inches (203 × 254 mm, when
using the film area guide)
Scanning and Restoring Photos
The following example uses Adobe® Photoshop® Elements and
EPSON Scan. If you are using another software application,
your steps may be different.
1. Start Adobe Photoshop Elements:
In Windows, click
Adobe Photoshop Elements.
On a Macintosh, open the
folder (in your Applications folder) and double-click the
Photoshop Elements icon.
2. Select
File > Import > EPSON Perfection 4990.
Start > Programs or All Programs >
Adobe Photoshop Elements
USB Interface
Interface type Universal Serial Bus Specification
Revision 2.0
Connector type One receptacle (Type B)
FireWire Interface
Interface type IEEE 1394a-2000 compatible
Protocol ANSI X3T10 Serial Bus Protocol 2 revision
4L (SBP-2)
Connector type IEEE 1394a-2000 compatible six pin
2 - Epson Perfection 4990 Series 10/04
Epson Perfection 4990 Series
3. In EPSON Scan, choose Home or Professional mode. You
see a screen similar to this:
4. Click the
Preview button at the bottom of the screen. Your
photo appears in the Preview window.
Scanning Transparencies and Film
Before scanning transparent documents, you need to remove
the scanner’s reflective document mat; this exposes the scanner’s
transparency unit (light source), which is built into the lid.
If you’re scanning slides or film strips, you’ll also need to use
one of the film holders.
Note:
For instructions on scanning film and contact sheets, up to 8 ×
10 inches, see the on-screen Reference Guide.
Using the Transparency Unit
1. Make sure the transparency unit cable is connected to the
transparency unit connector on the back of the scanner.
(If it is not connected, turn off the scanner, connect the
transparency unit cable, then turn the scanner back on.)
2. Lift the scanner lid all the way up and pull the reflective
document mat up and off of the scanner lid, as shown.
5. Click the button to select the image area to be scanned.
Adjust the marquee if necessary.
6. Select the
Digital ICE or Color Restoration checkbox
(in Professional Mode, scroll to the bottom of the screen):
❏ If your photo is dirty, scratched, creased, or torn, select
Digital ICE.
❏ If the colors in your photo are faded, select
Restoration.
Note:
You can select both settings, if necessary.
Color
7. Click the Scan button.
Click the
Close button. Your image now appears in Photoshop
Elements.
3. If you are scanning film or negatives, open the cover, then
slide the film into the corresponding holder, with the film’s
shiny base side facing down. (If you are scanning slides, go
to step 6.)
10/04 Epson Perfection 4990 Series - 3
Epson Perfection 4990 Series
4. Lock the film holder cover into place
5. Place the film holder on the scanner as shown. Make sure
the white triangle on the holder points to the upper-right
corner of the scanner.
Make sure this
calibration space
is uncovered
Selecting Film or Slide Settings in EPSON Scan
The following example uses Adobe Photoshop Elements and
EPSON Scan. If you are using another software application,
your steps may be different.
1. Start Adobe Photoshop Elements:
In Windows, click
Adobe Photoshop Elements.
On a Macintosh, open the
folder (in your Applications folder) and double-click the
Photoshop Elements icon.
2. Select
File > Import > EPSON Perfection 4990.
3. In EPSON Scan, choose Home or Professional Mode.
Select the
Document Type (Home Mode) and Film Type
(Professional Mode).
Home Mode
Start > Programs or All Programs >
Adobe Photoshop Elements
6. If you are scanning slides, place the holder on the scanner.
Then place the slides in the holder.
Make sure this
calibration space is
uncovered
7. Close the scanner cover.
Professional Mode
Note:
When scanning slides, choose Positive Film.
4. Click the Preview button at the bottom of the screen.
Thumbnails of your images appear in the Preview window:
4 - Epson Perfection 4990 Series 10/04
Epson Perfection 4990 Series
5. For each thumbnail, select from the following Image
Adjustment options (in Professional Mode, scroll to the
bottom of the screen):
❏
Grain Reduction (available only in Professional
Mode)—Use with high-speed film or under-exposed
images. Select the level of grain reduction by clicking the
button.
❏
Color Restoration—Restores color to faded images.
❏
Dust Removal (available only in Professional
Mode)—Removes dust. Select the level of dust removal
by clicking the button.
❏
Digital ICE—Removes scratches, dust and fingerprints.
Note:
You cannot select Dust Removal and Digital ICE at the
same time.
6. Click the Scan button.
7. Click the
Close button. Your images now appear in
Photoshop Elements.
Indicator Light
The indicator light (next to the ] Start button) indicates the
status of the scanner, as described below.
Light Color Status
On Green The scanner is ready to scan images.
Flashing Green The scanner is initializing (warming up) or is
busy scanning.
Flashing Red Check the following, then turn your
scanner off and back on to reset it:
❏ Make sure the transportation lock is
turned to the unlocked position. See
the Start Here sheet for details.
❏ Make sure the scanner is properly
connected to your computer.
❏ If you are scanning transparencies,
make sure you’ve removed the
reflective document mat. See page 3.
If this does not eliminate the error, the
fluorescent lamp may need to be replaced
or the scanner may have another problem.
Consult your dealer or Epson.
Off — The scanner is unplugged or turned off.
Transporting the Scanner
If you need to ship your scanner, you must prepare it for
transportation in it’s original box or one of a similar size.
1. Turn on the scanner and wait until the carriage moves to
the home position. When the indicator light remains solid
green, turn off the scanner.
2. Disconnect the power cable.
3. Disconnect the USB or IEEE 1394 cable.
4. Disconnect the transparency unit cable.
5. Turn the transportation lock to the locked position to
secure the carriage.
10/04 Epson Perfection 4990 Series - 5
Epson Perfection 4990 Series
6. Slide the transportation lock to the locked position to secure
the transparency unit.
Related Documentation
CPD-18892 Epson Perfection 4990 Photo Start Here
poster
CPD-18893 Epson Perfection 4990 Pro Start Here
poster
CPD-18891 Epson Perfection 4990 Series scanner
software CD-ROM
CPD-18890 Epson Perfection 4990 Series Quick Guide
— Reference Guide (HTML)
6 - Epson Perfection 4990 Series 10/04
Loading...