Epson MF1466-01 User Manual

MF1466-01

CMOS 8-BIT SINGLE CHIP MICROCOMPUTER

S5U1C8F360Z1

(Adapter Board for S1C8F360/8F361)

Manual

NOTICE

No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko
Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any
liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or
circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such
as medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there
is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright
infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic
products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from
the Ministry of International Trade and Industry or other approval from another government agency.

© SEIKO EPSON CORPORATION 2001 All rights reserved.

New configuration of product number

Starting April 1, 2001, the configuration of product number descriptions will be changed as listed
below. To order from April 1, 2001 please use these product numbers. For further information, please
contact Epson sales representative.

Devices

S1

C 88104 F 0A01

Development tools

S5U1

C 88348 D1 1

00

Packing specification
Package (D: die form; F: QFP)
Model number
Model name (C: microcomputer, digital products)
Product classification (S1: semiconductor)

00

Packing specification
Version (1: Version 1)
Tool type (D1: Development Tool)
Corresponding model number (88348: for S1C88348)
Tool classification (C: microcomputer use)
Product classification
(S5U1: development tool for semiconductor products)

CONTENTS

S5U1C8F360Z1 Manual (Adapter Board for S1C8F360/8F361)

This manual describes how to use the Adapter Board (S5U1C8F360Z1) that is a PROM writing and
evaluation tool for the 8-bit Single Chip Microcomputer S1C8F360/8F361.

Contents

CHAPTER 1INTRODUCTION____________________________________________ 1

1.1 Outline of S1C8F360 Adapter Board (S5U1C8F360Z1)............................. 1

1.2 Components of S1C8F360 Adapter Board (S5U1C8F360Z1).....................1

CHAPTER 2PRECAUTIONS ____________________________________________ 2

2.1 Precautions for Operation............................................................................ 2

2.2 Differences from the ICE88UR (S5U1C88000H5)

+ PRC88816 (S5U1C88816P) ..................................................................... 2

CHAPTER 3CONFIGURATION FOR THE S1C8F361 __________________________ 4
CHAPTER 4NAME AND FUNCTION OF EACH PART ___________________________ 5
CHAPTER 5SERIAL PROGRAMMING ______________________________________ 6

5.1 Setting the Jumpers....................................................................................... 6

5.2 Connecting the Power Cable ........................................................................ 6

5.3 Pin Assignment of the CN4 Connector for Serial Programming ................. 6

CHAPTER 6CONNECTING WITH THE TARGET SYSTEM _________________________ 7
CHAPTER 7 S1C8F360 ADAPTER BOARD (S5U1C8F360Z1) SCHEMATIC DIAGRAM _9
CHAPTER 8PRODUCT SPECIFICATIONS ___________________________________ 10

S5U1C8F360Z1 MANUAL EPSON i
(ADAPTER BOARD FOR S1C8F360/8F361)

CHAPTER 1: INTRODUCTION

CHAPTER 1INTR ODUCTION

1.1 Outline of S1C8F360 Adapter Board (S5U1C8F360Z1)

The S5U1C8F360Z1 board (hereafter Adapter Board) is a PROM writing tool for the 8-bit Single Chip
Microcomputers S1C8F360 and S1C8F361. The Adapter Board connected to the On Board Programming
Writer (S5U1C88000W3) allows writing user data to the Flash EEPROM built into the S1C8F360/8F361
(package model) placed on its IC socket using the On Board Programming Writer Control Software
(S5U1C8F360Y3).
The Adapter Board can also be used as a software evaluation board by mounting peripheral circuits on
the board.

S5U1C8F360Z1

1.2 Components of S1C8F360 Adapter Board (S5U1C8F360Z1)

After unpacking the S5U1C8F360Z1 package, check to see that all of the following components are
included.

(1) S5U1C8F360Z1 board................................................................ 1

(2) I/O cable (80-pin/40-pin × 2 flat type) .................................. 2

(3) I/O cable (60-pin/30-pin × 2 flat type) .................................. 1

(4) I/O connector for target system (40 pins) ............................. 4

(5) I/O connector for target system (30 pins) ............................. 2

(6) Power cable................................................................................. 1

(7) S5U1C8F360Z1 Manual (this manual) ................................... 1

(8) Warranty card............................................................................. 1

(9) User registration card ............................................................... 1

(10) Note for use ................................................................................ 1

S5U1C8F360Z1 MANUAL EPSON 1
(ADAPTER BOARD FOR S1C8F360/8F361)

CHAPTER 2: PRECAUTIONS

CHAPTER 2PRECA UTIONS

The connectors CN1, CN2 and CN3 have the same pin layout as the Peripheral Circuit Board for
S1C88816/8F360 (S5U1C88816P). This allows connection between the user target system for the
S5U1C88816P and the Adapter Board.

Take the following precautions when using the S1C8F360 Adapter Board (S5U1C8F360Z1):

2.1 Precautions for Operation

(1) Turn the power of all equipment off before connecting or disconnecting cables.
(2) Do not turn the power on while the input ports (K00–K03) are all set to low level. It may cause a

simultaneous key input reset.

2.2 Differences from the ICE88UR (S5U1C88000H5) + PRC88816 (S5U1C88816P)

The emulation system using the Adapter Board with an actual IC differs in terms of functionality and
characteristics from the S5U1C88816P emulation system, a fact which requires your attention. If these
differences are ignored, there is a possibility that your circuit will not operate properly on an actual IC
even though it might have performed well on the S5U1C88000H5 with the S5U1C88816P.

(1) Power supply differences

To operate the actual IC on the Adapter Board, an external power source voltage must be applied.
Refer to "Electrical Characteristics" chapter in the "S1C8F360 Technical Manual" for the supply
voltage.

(2) I/O differences

The output drive capability and pull up resistance are different.
The input setup time is different therefore, when a circuit requiring consideration of the input re­sponse time, such as a key matrix, is used, the system and the software should be designed according
to the specifications for the actual IC.

(3) LCD differences

The output drive capability is different.
Since there will be differences with the actual IC even for the drive voltage, the system and the
software should be designed in order to adjust the characteristics.

(4) Analog comparator differences

The response time and characteristics of the analog comparator are different. Consequently, the
system and the software should be designed according to the specifications for the actual IC.

(5) Functional differences

<Oscillation circuit>

• The Adapter Board does not contain oscillator parts. Mount the parts according to the selected mask
option for the actual IC.

• The OSC3 oscillation stability time of the S5U1C88816P is shorter than that of the actual IC. There­fore, the application program must take enough of interval (more than the oscillation stability time
in the actual IC) between starting the OSC3 oscillation and switching the system clock to OSC3.

• The logic level is different and it makes different oscillation timings such as the start and stop times.

•When switching the operating clock from OSC3 to OSC1, be sure to switch OSC3 oscillation off with
separate instructions. Using a single instruction to process simultaneously may cause a malfunction
of the CPU.

2 EPSON S5U1C8F360Z1 MANUAL

(ADAPTER BOARD FOR S1C8F360/8F361)

CHAPTER 2: PRECAUTIONS

• Do not turn the OSC3 oscillation circuit on in the low power mode.

Do not switch over the operating mode (normal mode ↔ high speed mode) when the OSC3 oscilla­tion circuit is on, as this will cause a malfunction.

<Internal power supply circuit>

The actual IC on the Adapter Board can change over the internal power voltage (set by VDC2, VDC1
and VDC0), but the S5U1C88816P cannot change the actual power voltage, because only the VDC2,
VDC1 and VDC0 values are changed.
For this reason, since the S5U1C88816P will operate, even if the stable time required for changeover is
not taken, be sure that the stable time is provided by the software.
Also, since the usable frequency of OSC1 and OSC3 depends on the internal power voltage, refer to
the technical manual for the S1C8F360 or S1C8F361 and take care so as not to operate it with an
inappropriate combination.
When turning the OSC3 oscillation circuit on after switching the operating voltage, the software must
take a voltage stabilization wait time of 5 msec.

<LCD drive power>

To drive an LCD using the Adapter Board, mount the parts required for V

C1 to VC5 and CA to CE (CA

to CG in the S1C8F361) on the board or supply an external LCD power.

Note: The S1C8F360 Adapter Board supports the S1C8F361 as well. When using the board for the

S1C8F361, the AV

DD

and AVSS pins on the board must be changed to the CF and CG pins,

respectively, using the jumper and mount a capacitor to the holes indicated as C1.

<Reset circuit>

___________

Mount parts such as a switch and a capacitor at the RESET pin on the Adapter Board.

S5U1C8F360Z1 MANUAL EPSON 3
(ADAPTER BOARD FOR S1C8F360/8F361)

CHAPTER 3: CONFIGURATION FOR THE S1C8F361

CHAPTER 3CONFIGURA TION FOR THE S1C8F361

The S1C8F360 Adapter Board (S5U1C8F360Z1) supports the S1C8F361 as well as the S1C8F360. In this
case, the pins listed in the table below change their functions.

Table 3.1 Pin function for S1C8F361

Print

DD

AV
AV

SS

When using the S1C8F361, open the AVDD and AVSS jumpers and mount the booster capacitor for the CF
and CG at C1.

S1C8F360

DD

AV
AV

SS

S1C8F361

CF
CG

AVDD

CF

AVSS

C1

CG

Fig. 3.1 CF and CG for the S1C8F361

4 EPSON S5U1C8F360Z1 MANUAL

(ADAPTER BOARD FOR S1C8F360/8F361)

CHAPTER 4: NAME AND FUNCTION OF EACH PART

CHAPTER 4NAME AND FUNCTION OF EACH PART

This chapter describes the name and function of each part of the S1C8F360 Adapter Board
(S5U1C8F360Z1).

(5) (4)

(3)

(1)

(2)

(6)

(2)

(2)

(7)

Fig. 4.1 Top view of the S5U1C8F360Z1 board

(1) IC socket

Insert an actual IC. Align Pin 1 with the bottom left corner of the socket (in top view) and insert IC.

(2) Connectors for target system (CN1, CN2, CN3)

These connectors are used to connect the I/O and LCD. Connect the target system using the I/O
cables (80-pin/40-pin × 2 flat type and 60-pin/30-pin × 2 flat type).
The pin assignment is the same as the S5U1C88816P connectors.
Refer to Chapter 6, "Connecting with the Target System", for the pin assignment.

(3) Connector for serial programming (CN4)

This connector is used to connect the On Board Programming Writer (S5U1C88000W3). Use this
connector when writing user data to the Flash EEPROM built into the microcomputer on the IC slot.
Refer to Chapter 5, "Serial Programming", for the pin assignment. For how to use the On Board
Programming Writer, refer to the "S1C8F360 Technical Manual".

(4) Power connector (CN5)

This connector is used to supply power to the S1C8F360 Adapter Board.
Use the supplied power cable for connection.

(5) Power system jumpers and check pins

Set according to the power supply conditions.

(6) Through holes for oscillator, LCD drive power and LCD voltage booster

Use them to mount the parts such as oscillator parts, capacitors and resistors. Refer to "Basic External
Wiring Diagram" in the "S1C8F360 Technical Manual" for the basic parts to be mounted.

(7) IC socket pattern

Cannot be used.

S5U1C8F360Z1 MANUAL EPSON 5
(ADAPTER BOARD FOR S1C8F360/8F361)

CHAPTER 5: SERIAL PROGRAMMING

CHAPTER 5SERIAL PROGRAMMING

The S1C8F360 Adapter Board (S5U1C8F360Z1) connected to the On Board Programming Writer
(S5U1C88000W3) allows writing user data to the Flash EEPROM built into the S1C8F360/8F361 (package
model) placed on its IC socket using the On Board Programming Writer Control Software
(S5U1C8F360Y3).
Refer to "Appendix PROM programming" in the "S1C8F360 Technical Manual" for the programming
procedure.

5.1 Setting the Jumpers

Before performing serial programming, set the jumpers for the power unit as shown in Table 5.1.1.

Note: Be aware that the configuration is different between the S1C8F360 and the S1C8F361.

Table 5.1.1 Jumper settings for serial programming

Jumper

DD

V

V

SS

AV

DD

AV

SS

AV

REF

5.2 Connecting the Power Cable

Serial programming needs external power to be supplied to the CN5 connector on the S1C8F360 Adapter
Board (S5U1C8F360Z1) using the supplied power cable.

S1C8F360

short
short
short
short
short

S1C8F361

short
short
open
open
short

Table 5.2.1 Pin assignment of the CN5 power connector

CN5

1
2

Power cable

Red

Black

Power supply

V

DD

V

SS

5.3 Pin Assignment of the CN4 Connector for Serial Programming

The CN4 connector is used to connect the SIO cable from the On Board Programming Writer
(S5U1C88000W3).

Table 5.3.1 Pin assignment of the CN4 connector for serial programming

No.

1
2
3
4
5
6
7
8

9
10
11
12
13
14
15
16

CN4

Pin name

V

D1F

V

DD

CLKW

SS

V

SCLK

SS

V

TXD

SS

V

RXD

SS

V

RESET

SS

V

SPRG

V

SS

N.C.
N.C.

Programming power supply pin
Power supply pin
System clock output pin
GND pin
Serial I/F clock output pin
GND pin
Serial I/F data output pin
GND pin
Serial I/F data input pin
GND pin
Initial reset output pin
GND pin
Programming mode setup output pin
GND pin

Function

6 EPSON S5U1C8F360Z1 MANUAL

(ADAPTER BOARD FOR S1C8F360/8F361)

CHAPTER 6: CONNECTING WITH THE TARGET SYSTEM

CHAPTER

6C

ONNECTING WITH THE TARGET SYSTEM

The Adapter Board (S5U1C8F360Z1) can be used as an evaluation board by connecting it with the user
target board.

(1) To operate the microcomputer on the Adapter Board, the user must provide the peripheral circuits.

Refer to "Basic External Wiring Diagram" in the "S1C8F360 Technical Manual" for the required circuits.

(2) Use the supplied I/O cables (80-pin/40-pin × 2 flat type and 60-pin/30-pin × 2 flat type) for connect-

ing between the S1C8F360 Adapter Board (S5U1C8F360Z1) and the target system.

(3) Be sure to turn the power off before connecting the target system because the I/O cable includes a

power line (V

CN1

CN2

CN3

DD).

mark

I/O cables

CN1-1
(40 pins)

CN1-2
(40 pins)

CN2-1
(40 pins)

CN2-2
(40 pins)

CN3-1
(30 pins)

CN3-2
(30 pins)

To target board

Fig. 6.1 Connecting with the target system

S5U1C8F360Z1 MANUAL EPSON 7
(ADAPTER BOARD FOR S1C8F360/8F361)

CHAPTER 6: CONNECTING WITH THE TARGET SYSTEM

Table 6.1 Pin assignment of the I/O connectors

40-pin CN1-1

No.

Pin name

1

VDD

2

VDD

3

VSS

4

VSS

5

K00

6

K01

7

K02

8

K03

9

K04

10

K05

11

K06

12

K07

13

K10

14

K11

15

P00

16

P01

17

P02

18

P03

19

P04

20

P05

21

P06

22

P07

23

P10

24

P11

25

P12

26

P13

27

P14

28

P15

29

P16

30

P17

31

R00

32

R01

33

R02

34

R03

35

R04

36

R05

37

R06

38

R07

39

R10

40

R11

CN1

40-pin CN1-2

No.

1
2
3
4
5
6
7
8

9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40

Pin name

R12
R13
R14
R15
R16
R17
R20
R21
R22
R23
R24
R25
R26
R27
R30
R31
R32
R33
R34
R35
R36
R37
R50

R51
COM0
COM1
COM2
COM3
COM4
COM5
COM6
COM7
COM8
COM9

COM10
COM11
COM12
COM13
COM14
COM15

40-pin CN2-1

No.

1
2
3
4
5
6

MCU/MPU
7
8
9

10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40

Pin name

VDD
VDD

VSS
VSS

RESET

OSC1
OSC3

C1

V
VC2
VC3
VC4

VC5
SEG0
SEG1
SEG2
SEG3
SEG4
SEG5
SEG6
SEG7
SEG8
SEG9

SEG10
SEG11
SEG12
SEG13
SEG14
SEG15
SEG16
SEG17
SEG18
SEG19
SEG20
SEG21
SEG22
SEG23
SEG24
SEG25
SEG26

CN2

40-pin CN2-2

No.

Pin name

1

SEG27

2

SEG28

3

SEG29

4

SEG30

5

SEG31

6

SEG32

7

SEG33

8

SEG34

9

SEG35

10

SEG36

11

SEG37

12

SEG38

13

SEG39

14

SEG40

15

SEG41

16

SEG42

17

SEG43

18

SEG44

19

SEG45

20

SEG46

21

SEG47

22

SEG48

23

SEG49

24

SEG50

25

COM31

26

COM30

27

COM29

28

COM28

29

COM27

30

COM26

31

COM25

32

COM24

33

COM23

34

COM22

35

COM21

36

COM20

37

COM19

38

COM18

39

COM17

40

COM16

30-pin CN3-1

No.

Pin name

1

SEG51

2

SEG52

3

SEG53

4

SEG54

5

SEG55

6

SEG56

7

SEG57

8

SEG58

9

SEG59

10

SEG60

11

SEG61

12

SEG62

13

SEG63

14

SEG64

15

SEG65

16

SEG66

17

N.C.

18

N.C.

19

N.C.

20

N.C.

21

N.C.

22

N.C.

23

N.C.

24

N.C.

25

N.C.

26

N.C.

27

N.C.

28

N.C.

29

N.C.

30

N.C.

CN3

30-pin CN3-2

No.

1
2
3
4
5
6
7
8

9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30

Pin name

N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.

8 EPSON S5U1C8F360Z1 MANUAL

(ADAPTER BOARD FOR S1C8F360/8F361)

CHAPTER 7: S1C8F360 ADAPTER BOARD (S5U1C8F360Z1) SCHEMATIC DIAGRAM

CHAPTER 7 S1C8F360 ADAPTER BOARD

(S5U1C8F360Z1) SCHEMA TIC DIAGRAM

8

7

6

5

1 2

CD2

CG2

VCC

GND

1

2

CN5

CG1

XTAL1

OSC1

VD1F

VD1

VOSC VD1

VOSC

AVREF VOSC VD1 VD1F

VCC

AVREF

JP4 JP5

GND

AVSS/CG

C1

AVDD/CF AVSS/CG

JP3

VCC

AVDD/CF

VSS

JP2

GND

VSS

VDD

JP1

VCC

VDD

OSC1
OSC2OSC2
XTEST
XRESET
MCU/MPU
K11
K10
K07
K06
K05
K04
K03
K02
K01
K00
P17
P16
P15
P14
P13
P12
P11

P10
AVDD/CF
AVSS/CG

AVREF

VDD

P07

P06

P05

P04

P03

P02

P01

P00

R00

R01

R02

R03

R04

R05

R06

R07

R10

Cp

VDD

VSS

U1

S1C8F360

89

OSC1

90

OSC2

91

/TEST

92

/RESET

93

MCU/MPU

94

K11

95

K10

96

K07

97

K06

98

K05

99

K04

100

K03

101

K02

102

K01

103

K00

104

P17

105

P16

106

P15

107

P14

108

P13

109

P12

110

P11

111

P10

112

AVDD

113

AVSS

114

AVREF

115

VDD

116

P07

117

P06

118

P05

119

P04

120

P03

121

P02

122

P01

123

P00

124

R00

125

R01

126

R02

127

R03

128

R04

129

R05

130

R06

131

R07

132

R10

4

R1

VC5

VC1

VC3

VC4

VC2

8

Rf

XTAL2

VDD

VD1

VSS

VOSC

OSC4 OSC4

86

85

88

87

84

VD1

VSS

VDD

VOSC

R11

R12

R13

R14

133

134

135

136

137

R14

R12

R15

R13

R11

CA

CA

CDCE

VEPEXT

CB

CC

VC3

VC2

VC4

OSC3

VC1

OSC3

VC2

VC3

VC5 VC5

VC4

VC1

CA

82

77

CB76CA

VC578VC479VC380VC281VC1

OSC383OSC4

R15

R16

R17

R20

R21

R22

R23

R24

R25

138

139

140

141

142

143

144

145

R25

R16

R23

R21

R17

R24

R22

R20

VEPEXT

CE

CD

VEPEXT

COM16

XSPRG

COM18

COM19

COM17

COM20

COM21

COM22

COM23

COM24

VD1F

RXD

SCLK

CLKW

CDCACB CB

CC CC

TXD

CE

75

69

72

68

66

67

71

65

73

70

CE

CD74CC

TXD

RXD

VD1F

SCLK

CLKW

XSPRG

VEPEXT

R26

R27

R30

R31

R32

R33

R34

R35

R36

146

147

R26

R27

R37

148

149

150

151

152

153

154

155

156

R37

R31

VSS

R32

R30

R36

R35

R33

R34

COM25

VSS

R50

R51

COM0

COM1

COM2

COM3

COM4

COM5

157

R50

COM6

158

159

160

161

162

163

164

165

R51

COM1

COM3

COM2

COM5

COM4

COM6

COM0

COM26

166

COM7

COM7

COM27

167

COM8

COM8

COM28

168

COM9

COM9

SEG48

COM29

COM30

COM31

SEG47

SEG46

SEG50

SEG49

49

SEG4645SEG4746SEG4847SEG4948SEG50

COM3250COM3051COM2952COM2853COM2754COM2655COM2556COM2457COM2358COM2259COM2160COM2061COM1962COM1863COM1764COM16

COM10

COM11

COM12

COM13

COM14

169

170

171

172

173

COM14

COM10

COM12

COM11

COM13

44

SEG45

43

SEG44

SEG44

42

SEG43

SEG43

41

SEG42

SEG42

40

SEG41

SEG41

39

SEG40

SEG40

38

SEG39

SEG39
SEG38
SEG37
SEG36
SEG35
SEG34
SEG33
SEG32
SEG31
SEG30
SEG29
SEG28
SEG27
SEG26
SEG25
SEG24
SEG23
SEG22
SEG21
SEG20
SEG19
SEG18
SEG17
SEG16
SEG15
SEG14
SEG13
SEG12
SEG11
SEG10
SEG9
SEG8
SEG7
SEG6
SEG5
SEG4
SEG3
SEG2

COM15

SEG0

SEG1

174

175

176

SEG0

COM15

SEG1

XRESET

37

SEG38

36

SEG37

35

SEG36

XSPRG

34

SEG35

33

SEG34

32

SEG33

XTEST

31

SEG32

30

SEG31

29

SEG30

28

SEG29

27

SEG28

K00

26

SEG27

25

SEG26

K01

24

SEG25

23

SEG24

K02

22

SEG23

21

SEG22

K03

20

SEG21

19

SEG20

K04

18

SEG19

17

SEG18

K05

16

SEG17

15

SEG16

K06

14

SEG15

13

SEG14

K07

12

SEG13

11

SEG12

K10

10

SEG11

9

SEG10

K11

8

SEG9

7

SEG8

MCU/MPU

6

SEG7

5

SEG6

4

SEG5

3

SEG4

2

SEG3

1

SEG2

7

XRESET

XSPRG

XTESTK00K01K02K03K04K05K06K07K10K11

6

5

MCU/MPU

4

COM24COM7

SEG18

P21

B B

COM23

SEG19

COM8

P22

COM22

SEG20

COM9

P23

60

30

COM18COM13

COM19

COM17

COM16

COM21

COM20

80

40

SEG23

SEG24

SEG22

SEG25

SEG21

COM10

COM11

COM14

COM12

COM15

80

40

R10

P26

R11 SEG26

P25

P24

P27

VDD

VD1F

123456789

CN4

XRESET

GND

TXD

RXD

XSPRG

GND

GND

SCLK

GND

CLKW

GND

GND

10111213141516

A A

39

2-1312-2322-3332-4342-5352-6362-7372-8382-9

1-111-221-331-441-551-661-771-881-991-10101-11111-12121-13131-14141-15151-16161-17171-18181-19191-20201-21211-22221-23231-24241-25251-26261-27271-28281-29291-30

CN3

3

SEG27

SEG28

2-1412-2422-3432-4442-5452-6462-7472-8482-9

1-111-221-331-441-551-661-771-881-991-10101-11111-12121-13131-14141-15151-16161-17171-18181-19191-20201-21211-22221-23231-24241-25251-26261-27271-28281-29291-30301-31311-32321-33331-34341-35351-36361-37371-38381-39391-40

CN2

SEG51

SEG31

SEG32

SEG29

SEG37

SEG35

SEG30

SEG36

SEG34

SEG33

49

2-10502-11512-12522-13532-14542-15552-16562-17572-18582-19592-20602-21612-22622-23632-24642-25652-26662-27672-28682-29692-30702-31712-32722-33732-34742-35752-36762-37772-38782-39792-40

2-10402-11412-12422-13432-14442-15452-16462-17472-18482-19492-20502-21512-22522-23532-24542-25552-26562-27572-28582-29592-30

SEG60

SEG53

SEG58

SEG55

SEG52

SEG39

SEG38

SEG62

SEG61

SEG56

SEG57

SEG54

SEG59P04

SEG40

SEG42

SEG43

SEG48

SEG46

SEG44

SEG45

SEG41

SEG47

SEG63

SEG64

SEG65

SEG66

COM28

COM29

COM26

SEG50

COM25

SEG49

COM27

COM31

2

VSS

VDD

VC2

VC3

XRESET

VDD

OSC3

VC1

VSS

MCU/MPU

OSC1

R20

R13

R14

R23

R24

R17

R15

R21

R12

R16

R22

49

2-1412-2422-3432-4442-5452-6462-7472-8482-9

1-111-221-331-441-551-661-771-881-991-10101-11111-12121-13131-14141-15151-16161-17171-18181-19191-20201-21211-22221-23231-24241-25251-26261-27271-28281-29291-30301-31311-32321-33331-34341-35351-36361-37371-38381-39391-40

1

CN1

VDD

VDD

D D

S5U1C8F360Z1 MANUAL EPSON 9
(ADAPTER BOARD FOR S1C8F360/8F361)

2-10502-11512-12522-13532-14542-15552-16562-17572-18582-19592-20602-21612-22622-23632-24642-25652-26662-27672-28682-29692-30702-31712-32722-33732-34742-35752-36762-37772-38782-39792-40

K01

VSS

K02

VSS

K06

K05

K00

K03

K04

C C

SEG6

SEG7

VC4

SEG0

VC5

SEG3

SEG5

SEG1

SEG4

SEG2

R31

R32

R33

R34

R27

R30

R35

R26

R25

K11

P03

P01

K07

P05

K10

P00

P02

SEG15

SEG16

SEG12

SEG9

SEG17

SEG10

SEG14

SEG8

SEG11

SEG13

R37

COM0

R51

COM3

COM5

COM1

R36

P07

P06

COM6

R50

COM2

COM4

P10

P11

P13 COM30

P17

P14

P20

P15

P12

P16

3

2

1

CHAPTER 8: PRODUCT SPECIFICATIONS

CHAPTER 8PRODUCT SPECIFICA TIONS

The component specifications of the S1C8F360 Adapter Board (S5U1C8F360Z1) are listed below.

S5U1C8F360Z1

Dimensions:

183 mm (L) × 154 mm (W) × 48 mm (H)

Power supply:

Within the operating voltage range of the microcomputer

I/O cable (80-pin/40-pin × 2, 2 sets)

S5U1C8F360Z1 connector:

KEL 8830-80-170L or equivalent

Cable connector (80-pin):

KEL 8822E-080-171 ×1/1 set

Cable connector (40-pin):

3M 7940-6500SC ×2/1 set

Cable:

40-pin flat cable ×2/1 set

Length:

Approx. 40 cm (both cables are the same length)

I/O connection cable (60-pin/30-pin × 2, 1 set)

S5U1C8F360Z1 connector:

KEL 8830-60-170

Cable connector (60-pin):

KEL 8822E-060-171 ×1/1 set

Cable connector (30-pin):

3M 7930-6500SC ×2/1 set

Cable:

30-pin flat cable ×2/1 set

Length:

Approx. 40 cm

Power cable

S5U1C8F360Z1 connector:

J.S.T. Mfg Co., Ltd B2B-XH-A

Cable connector:

J.S.T. Mfg Co., Ltd XHP-2

Contacts:

J.S.T. Mfg Co., Ltd SXH-001T-P0.6

Length:

Approx. 35 cm

Accessories

I/O connectors for the target system

(40-pin): 3M 3432-6002LCSC ×4
(30-pin): 3M 3440-6002LCSC ×2

10 EPSON S5U1C8F360Z1 MANUAL

(ADAPTER BOARD FOR S1C8F360/8F361)

International Sales Operations

AMERICA

EPSON ELECTRONICS AMERICA, INC.

- HEADQUARTERS -

150 River Oaks Parkway
San Jose, CA 95134, U.S.A.
Phone: [phone] Fax: [phone]

- SALES OFFICES ­West

1960 E. Grand Avenue
EI Segundo, CA 90245, U.S.A.
Phone: [phone] Fax: [phone]

Central

101 Virginia Street, Suite 290
Crystal Lake, IL 60014, U.S.A.
Phone: [phone] Fax: [phone]

Northeast

301 Edgewater Place, Suite 120
Wakefield, MA 01880, U.S.A.
Phone: [phone] Fax: [phone]

Southeast

3010 Royal Blvd. South, Suite 170
Alpharetta, GA 30005, U.S.A.
Phone: +1-877-EEA-0020 Fax: [phone]

EUROPE

EPSON EUROPE ELECTRONICS GmbH

- HEADQUARTERS -

Riesstrasse 15
80992 Munich, GERMANY
Phone: [phone] Fax: [phone]

ASIA

EPSON (CHINA) CO., LTD.

23F, Beijing Silver Tower 2# North RD DongSanHuan
ChaoYang District, Beijing, CHINA
Phone: [phone] Fax: [phone]

SHANGHAI BRANCH

4F, Bldg., 27, No. 69, Gui Jing Road
Caohejing, Shanghai, CHINA
Phone: [phone] Fax: [phone]

EPSON HONG KONG LTD.

20/F., Harbour Centre, 25 Harbour Road
Wanchai, Hong Kong
Phone: [phone] Fax: [phone]
Telex: 65542 EPSCO HX

EPSON TAIWAN TECHNOLOGY & TRADING LTD.

10F, No. 287, Nanking East Road, Sec. 3
Taipei
Phone: [phone] Fax: [phone]
Telex: 24444 EPSONTB

HSINCHU OFFICE

13F-3, No. 295, Kuang-Fu Road, Sec. 2
HsinChu 300
Phone: [phone] Fax: [phone]

EPSON SINGAPORE PTE., LTD.

No. 1 Temasek Avenue, #36-00
Millenia Tower, SINGAPORE 039192
Phone: [phone] Fax: [phone]

SEIKO EPSON CORPORATION KOREA OFFICE

50F, KLI 63 Bldg., 60 Yoido-dong
Youngdeungpo-Ku, Seoul, 150-763, KOREA
Phone: [phone] Fax: [phone]

SALES OFFICE

Altstadtstrasse 176
51379 Leverkusen, GERMANY
Phone: [phone] Fax: [phone]

UK BRANCH OFFICE

Unit 2.4, Doncastle House, Doncastle Road
Bracknell, Berkshire RG12 8PE, ENGLAND
Phone: [phone] Fax: [phone]

FRENCH BRANCH OFFICE

1 Avenue de l' Atlantique, LP 915 Les Conquerants
Z.A. de Courtaboeuf 2, F-91976 Les Ulis Cedex, FRANCE
Phone: [phone] Fax: [phone]

BARCELONA BRANCH OFFICE
Barcelona Design Center

Edificio Testa, Avda. Alcalde Barrils num. 64-68
E-08190 Sant Cugat del Vallès, SPAIN
Phone: [phone] Fax: [phone]

SEIKO EPSON CORPORATION
ELECTRONIC DEVICES MARKETING DIVISION

Electronic Device Marketing Department
IC Marketing & Engineering Group

421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN
Phone: [phone] Fax: [phone]

ED International Marketing Department Europe & U.S.A.

421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN
Phone: [phone] Fax: [phone]

ED International Marketing Department Asia

421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN
Phone: [phone] Fax: [phone]

In pursuit of “Saving” Tec hnology, Epson electronic devices.

Our lineup of semiconductors, liquid crystal displays and quartz devices

assists in creating the products of our customers’ dreams.

Epson IS energy savings.

S5U1C8F360Z1

Manual

(Adapter Board for S1C8F360/8F361)

ELECTRONIC DEVICES MARKETING DIVISION

EPSON Electronic Devices Website

http://www.epson.co.jp/device/

Issue July, 2001

Printed in Japan A

L