* Ink thaws and is usable after approximately 3 hours at 77 °F (25 °C).
Caution:
To ensure good results, use genuine Epson ink cartridges and do
not refill them. Other products may cause damage to your printer
not covered by Epson’s warranty. Do not use an ink cartridge if the
date on the package has expired.
Paper
Note:
Since the quality of any particular brand or type of paper may be
changed by the manufacturer at any time, Epson cannot guarantee
the quality of any non-Epson brand or type of paper. Always test a
sample of paper stock before purchasing large quantities or printing
large jobs.
Envelopes
SizeNo. 10 (4.1 × 9.5 inches)
Paper typePlain bond paper
Weight20 lb (75 g/m²) to 24 lb (90 g/m²)
Note:
Poor quality paper may reduce the print quality and cause paper jams
or other problems. If you have print quality problems, switch to a
higher grade paper.
Do not load curled or folded paper.
Use paper only under normal conditions:
Temperature: 50 to 95 °F (10 to 35 °C)
Humidity: 20 to 80% RH
Printable Area
Single sheets
NormalBorderless*
A
B-LB-R
C
* When printing with the borderless feature, print quality may decline in the
expanded area. Before printing large jobs using the borderless setting, print a
single sheet to confirm printout quality.
2. Open the output tray and pull out the extension.
Electrical
Input voltage90 to 132 V
Rated frequency50 to 60 Hz
Rated current0.6 A (0.7 A max)
Power consumptionApprox. 15.2 W (copying), max 21.6 W
Approx. 3.8 W in sleep mode
Approx. 1 W (max.) in power-off mode
Environmental
TemperatureOperation: 50 to 95 °F (10 to 35 °C)
Storage: –4 to 104 °F (–20 to 40 °C)
1 month at 104 °F (40 °C)
HumidityOperation: 20 to 80% RH
Storage: 5 to 85% RH
(without condensation)
3. Flip the feeder guard forward.
5/073
Epson Stylus CX4400 Series
4. Press in the tab on the edge guide and slide it left.
5. Insert the paper, printable side up, against the right side.
Then slide the edge guide against the paper.
(The printed side is whiter or brighter on some papers.)
Always load paper short edge first, even for landscape
printing.
6. Flip the feeder guard back.
Follow these guidelines when loading paper:
❏ Don’t load paper above the arrow on the edge guide.
❏ Load the printable side face-up. It’s often brighter or whiter
than the other side.
❏ Always load the short edge first, even when printing in
landscape mode.
❏ Load letterhead or preprinted paper into the printer top
edge first.
❏ If you experience paper feeding problems, try loading fewer
sheets.
❏ If you’re using special paper, check the package for special
loading instructions.
You can load up to 80 sheets of plain paper and up to
20 sheets of photo paper. Load other special papers one
sheet at a time.
Note:
The type of paper you choose affects the way your printout
looks. If you are just making a copy or printing a rough draft of an
image, plain paper is fine. However, for the best results, you’ll
want to use one of Epson’s special ink jet papers designed for
your printer. For example, your photos will look great printed on
Epson Premium Photo Paper Glossy (see page 1 for more
information).
Envelopes
1. Open the paper support and output tray. Then pull out the
extension.
2. Flip the feeder guard forward. Then press in the tab on the
edge guide and slide it left.
45/07
Loading...
+ 8 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.