Before you start, make sure you set up your EPSON Stylus® CX3200 and installed
ink and paper, as described on the Start Here sheet. Then follow these steps to
connect the EPSON Stylus CX3200 to your Macintosh.
1. Remove the sticker from the USB port on the back of the Stylus CX.
2. Connect the square end of the USB cable to the USB port on the Stylus CX.
3. Then connect the flat end of the cable to a USB port on your Macintosh.
®
Flat endSquare end
4. Follow the instructions in one of the next sections to install the printer
software on your Macintosh.
1
Installing Printer Software on Mac OS
8.6 to 9.x
1. Insert the EPSON Stylus CX3200 CD-ROM in your CD-ROM or DVD
drive.
2. Double-click
EPSON in the window that opens.
3. Read and agree to the license agreement to continue the installation.
4. When the Software Installation screen appears, click
EPSON Stylus CX3200 Installer:
EPSON on your desktop, if necessary. Then double-click
Install. You see the
5. Click
Start and follow the on-screen instructions to install the driver and
restart your Macintosh.
Then continue with the instructions in the next section.
2
Installing Additional Software for Mac OS 8.6
to 9.x
1. After your Macintosh restarts, double-click the EPSON CD-ROM icon to
open it, if necessary, then double-click
EPSON. You see this screen:
2. Click
Install and follow the on-screen instructions to install each program.
After each one is installed, click
™
Panel
installs in several steps.
If you see a message about installing QuickTime,
Quit to continue. Note that EPSON Smart
™
click Yes and follow the
on-screen instructions. You don’t need a registration number.
When installation is complete, you see this screen:
3. Click the
Stylus CX. At the last screen, click
4. Click
Register button and follow the instructions to register your
Quit or close your browser.
Exit. Remove the CD-ROM and keep it in case you need to reinstall
any software later.
3
5. Open the Chooser from the Apple menu. Select CX3200, then select your
USB port and turn on background printing.
6. Close the Chooser. You’re ready to copy, scan, and print.
Installing Printer Software on Mac OS X
Before you start, make sure you set up your EPSON Stylus CX3200, installed ink
and paper, and connected it to your Macintosh as described on the Start Here
sheet. Then follow these steps to install your drivers and additional software.
1. Insert the EPSON CD-ROM in your CD-ROM or DVD drive.
2. Double-click
3. Then double-click the
EPSON on your desktop.
CX3200 icon in the window that opens.
Double-click
CX3200
4. If you have an administrator password, you need to enter it before you can
continue. With OS X 10.2x, enter your password and click
OK.
4
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.