Epson ActionLaser 1500, ActionLaser 1000 User Manual
®
EPSON
1000/1500
Setup Guide
Contents
Setup
1 Unpacking
2 Installing the imaging cartridge
3 Loading paper
4 Attaching the power cord
5 Test printing
6 Connecting the printer to the computer
7 Testing the computer-to-printer connection
8 Setting up your software
.............................
.................
...........................
.....................
............................
............
..........
.....................
Maintenance
Replacing the imaging cartridge . . . . . . . . . . . . . . . . . .
Feed or paper jam . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1
1
4
5
5
6
7
8
11
i
This booklet is to help you set up your printer and begin printing
quickly. It also gives you instructions for routine maintenance. If you
need detailed information on printer use or if you have problems
printing, see your
Reference Guide.
Epson is a registered trademark of Seiko Epson Corporation.
General Notice: Other product names wed herein are for identification purposes only and
may be trademarks of their respective companies.
Copyright 8 1992 by Epson America, Inc., Torrance, California.
ii
Setup
Unpacking
1
1.
Remove the accessories and printer from the shipping
carton.
2.
Set the printer on a flat, stable surface.
3. Take the packaging off the printer and the other items and
store it for future use.
Note:
The printer weighs about 10 kg (22 lbs) and should be lifted with care.
2
Installing the imaging cartridge
CAUTION:
Do not turn the imaging cartridge upside down.
e
Do not expose the imaging cartridge to light any longer than
necessary.
1.
Press toward you on
the latch on the left to
open the printer cover.
2.
While holding the imaging cartridge horizontally, gently
shake it a few times to distribute the toner evenly.
3. Set the imaging cartridge on a clean, flat surface. Firmly grip
the tab on the left side of the imaging cartridge. Pull the
clear seal all the way out with firm, even pressure as shown.
4.
Insert the imaging cartridge into the printer by placing the
pins on each side of the cartridge into the grooves inside the
printer. Slide it gently into the opening until it stops.
5.
Gently press down on the printer cover until it clicks shut.
CAUTION:
Never transport the printer with the imaging cartridge
installed.
Setup 3
Loading...