Epson 8700, 8350 User Manual

PowerLite® Home Cinema 8350/8700 UB

Home Theater Projector

User’s Guide

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

Trademarks

Epson and C2Fine are registered trademarks, 1080Perfect is a trademark, and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation.

PowerLite and PrivateLine are registered trademarks, DigiScan and AccuCinema are trademarks, and Extra Care and Epson Connection are service marks of Epson America, Inc.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are registered trademarks of HDMI Licensing, LLC.

Pixelworks, DNX, and the DNX logo are trademarks of Pixelworks, Inc.

x.v.Color is a trademark of Sony Corporation.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

CPD-28061R1

Introduction 6

Projector Parts 7

Remote Control 9 Optional Accessories 10 Registration and Warranty 10 Using This Manual 11

Setting Up the Projector 12

Choosing a Location 12 Installing the Projector 16 Connecting the Cables 18

Connecting Video and Computer Equipment 18

Making Other Connections 20 Installing Batteries in the Remote Control 21 Turning the Projector On and Off 21

Turning On the Projector 21

Turning Off the Projector 22 Selecting the Image Source 23 Positioning the Image 24

Making Basic Adjustments 26

Focusing and Zooming 26 Choosing the Aspect Ratio 27 Choosing the Color Mode 28 Advanced Color Adjustments 29

Adjusting the Gamma Setting 30

Adjusting RGBCMY 31 Locking the Projector 32

Contents 3

Making Detailed Adjustments 33

Using the Menu System 33

Changing How the Menus Display 35 Adjusting the Picture Quality 35

Input Brightness Settings 35

Sharpness and Picture Quality Settings 37

Color Settings 40

Adjustments for Computer Images 42 Selecting Memory Settings and Resetting the Projector 43

Selecting Memory Settings 43

Creating Memory Settings 44

Renaming Memory Settings 44

Deleting Saved Memory Settings 45

Resetting the Projector 45 Customizing Projector Features 46

Image Sizing 46

Screen Options 47

Other Setup Options 47

Maintenance 50

Cleaning the Lens 50 Cleaning the Projector Case 51 Cleaning and Replacing the Air Filter 51 Replacing the Lamp 53

Checking the Projector Status 56 Storing the Projector 57 Transporting the Projector 57

Problem Solving 58

What To Do When the Lights Come On or Flash 58 Solving Picture Problems 60 Solving Remote Control Problems 63

4 Contents

Resetting the Lamp Usage Timer 56

Where to Get Help 64

Specifications 65

General 65 Lamp 65 Remote Control 66 Dimensions 66 Electrical 66 Environmental 67 Safety 67 Compatible Video Formats 67 ESC/VP21 Command Codes 69

Notices 71

Important Safety Information 71 FCC Compliance Statement 73 Declaration of Conformity 74 Epson America, Inc. Limited Warranty 74

Index 76

Contents 5

Introduction

The PowerLite® Home Cinema 8350/8700 UB projector lets you enjoy theater-quality images in the relaxing environment of your own home. Designed especially for home cinema use, it offers these outstanding features:

■ Native 1080p (1920 × 1080) resolution, dynamic contrast ratio up to 200000:1 (50000:1

for the Home Cinema 8350), and up to 1600 lumens (2000 lumens for the Home

Cinema 8350) of brightness (white light output and color light output) for incredibly

rich, sharp images in any room lighting

■ Auto Iris system that constantly controls the light output based on the gamma and

black/white levels of your projected content, for perfectly adjusted images and deepest

blacks

■ Epson C

uniform colors

■ 1080Perfect

Cinema 8700 UB) for more film-like images free of noise or artifacts

■ 10-bit color quality (digital only for the Home Cinema 8350) for unmatched color

accuracy, with over a billion colors available

■ Epson AccuCinema

blocks out excess light for an expanded, purer color range and sophisticated grayscale

tracking

■ HDMI

digital video

Fine® 3LCD technology for reliable picture quality, increased contrast ratio and

™

video processing (using HQV® Reon-VX technology for the Home

™

color management delivered by the built-in optical Cinema Filter

(High-Definition Multimedia Interface®) port for superior, uncompressed

■ True 16:9 wide-format projection

■ Flexible setup configurations, including front projection and ceiling mounted, with

vertical and horizontal offset lens shift

■ Seven color modes, including x.v.Color

lighting environments, and a vast array of custom color adjustments

6 Introduction

™

, to quickly optimize viewing for different

Projector Parts

Front

Lamp cover

Control panel (top)

Vertical lens shift dial

Control panel (side)

Zoom ring

Ventilation slots

Horizontal lens shift dial

Back

Component video port

HDMI ports

Focus ring

S-Video port

Lens cover

Infrared receiver

PC port

Infrared receiver

Adjustable foot

Control (RS-232C) port

Lamp cover release

Trigger out port

Kensington lock port

Air intake (filter)

Cable holder

Video port

Main power switch

AC power inlet

Introduction 7

Bottom

Mounting bracket attachment points

Optional cable cover attachment points (brass colored)

Projector Control Panel

Top control panel Side control panel

Power button

Source button Switches the video input source

Warning lights

8 Introduction

Menu button Displays the menus

Enter button Selects menu items or opens the line menu

Menu navigation button

Esc button Exits the current menu item

Remote Control

Power button Turns projector on or off

Default button Restores default settings when menu is displayed

Menu navigation buttons

Memory button Recalls custom picture settings

RGBCMY button Adjusts the hue, saturation, and brightness for each color

Gamma button Adjusts the gamma values of the screen display

Illumination button Lights the remote control buttons for easy viewing

Source buttons Switch between equipment connected to the projector

Esc (escape) button Exits the current menu item

Enter/Line Menu button Selects menu items or opens the line menu

Menu button Displays the projector’s menus

Color Mode button Optimizes viewing for different lighting environments

Aspect button Changes the picture’s aspect ratio

Sharpness button Adjusts image sharpness

Pattern button Displays test patterns to adjust the image

Blank button Temporarily stops projection or hides the menu screen

Introduction 9

Optional Accessories

Epson provides the following optional accessories for the projector:

Product Part number

Replacement lamp V13H010L49

Air filter replacement V13H134A21

Kensington security lock (anti-theft device) ELPSL01

Cable cover V12H003002

Projector mount ELPHB550

Anamorphic lens kit (Home Cinema 8700 UB only) ELPALK2

In addition to the accessories listed above, 1-year and 2-year extended service plans are available. You can purchase these plans and other accessories from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

Registration and Warranty

Your projector comes with a basic two-year carry-in warranty. For details, see page 74.

In addition, Epson offers free Extra Care equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States or Canada. See your Extra Care Home Service brochure for details.

Home Service. In the unlikely event of an

To register, simply follow the registration instructions on the CD, or register online at epson.com/webreg. Registering also lets you receive special updates on new accessories, products, and service.

10 Introduction

Using This Manual

This book contains all the information you need to use the projector, in addition to basic setup and maintenance instructions, troubleshooting tips, important safety instructions, specifications, and warranty information.

Please follow these guidelines as you read through the manual:

WARNING: Must be followed carefully to avoid bodily injury.

Caution: Must be observed to avoid damage to your equipment.

Note: Contains important information about your projector.

Tip: Contains helpful projection tips.

Need additional help? Take advantage of Epson’s automated support services 24 hours a day at epson.com/support (U.S.) or epson.ca/support (Canada). Use this site to view FAQs (Frequently Asked Questions) or product information and e-mail your questions to Epson support.

If you need more help, you can use the Epson PrivateLine (800) 637-7661 and enter the PIN on the PrivateLine support card that came with your projector.

Support service. Call

Introduction 11

Setting Up the Projector

Follow the instructions in this section to choose a location for the projector, connect the cables, and display an image.

Choosing a Location

You can install the projector for the viewing setups shown below, as well as rear projection.

Center

Side

Ceiling

12 Setting Up the Projector

Ideally, keep the projector level and place it at a height so its lens is centered between the top and bottom of the screen, as shown below. If this is not possible, use the lens shift dials to reposition the image. As a rule of thumb, you can use lens shift to move the image up or down by nearly its full height, and left or right by about one-half its width (for details, see page 25).

Offset A

Offset B

Offset refers to distance from

Projection distance

bottom of image to center of lens using maximum lens shift.

If you place the projector off to the side, aim it straight ahead (rather than at the center of the screen), then use the horizontal lens shift dial to center the image on the screen.

Horizontal lens shift dial

Vertical lens shift dial

Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the lens shift dials to change the lens position.

Setting Up the Projector 13

The size of the image is determined by the distance from the projector’s lens to the screen. Depending on your display settings and how you use the Zoom ring, the actual size may differ. Use these tables as a guide for projector placement:

16:9 aspect ratio

Projection distance

2.8 to 6.2 feet

0.87 to 1.88 m

3.8 to 8.3 feet

1.17 to 2.52 m

5.8 to 12.5 feet

1.77 to 3.80 m

7.8 to 16.7 feet

2.38 to 5.08 m

9.8 to 20.9 feet

2.98 to 6.36 m

11.8 to 25.1 feet

3.59 to 7.64 m

14.7 to 31.4 feet

4.50 to 9.56 m

19.7 to 41.8 feet

6.01 to 12.76 m

4:3 aspect ratio

Projection distance

3.5 to 7.6 feet

1.07 to 2.31 m

Diagonal image size (width × height) Offset A Offset B

30 in. (26 × 15 in.)

76.2 cm (66 × 37 cm)

40 in. (35 × 20 in.)

101.6 cm (89 × 50 cm)

60 in. (51 × 28 in.)

152.4 cm (130 × 75 cm)

80 in. (71 × 39 in.)

203.2 cm (180 × 100 cm)

100 in. (87 × 47 in.) 254 cm (220 × 120 cm)

120 in. (106 × 59 in.) 305 cm (270 × 150 cm)

150 in. (130 × 75 in.) 381 cm (330 × 190 cm)

200 in. (173 × 98 in.) 508 cm (440 × 250 cm)

Diagonal image size (width × height) Offset A Offset B

30 in. (24 × 18 in.)

76.2 cm (61 × 46 cm)

6.8 in. 17 cm

9.1 in. 23 cm

13.6 in. 35 cm

18.2 in. 46 cm

22.7 in. 58 cm

27.0 in. 69 cm

34.0 in. 86 cm

45.4 in. 115 cm

8.3 in. 21 cm

21.5 in. 55 cm

28.7 in. 73 cm

43.0 in. 109 cm

57.4 in. 146 cm

71.7 in. 182 cm

86.0 in. 219 cm

107.6 in. 273 cm

143.5 in. 364 cm

26.3 in. 67 cm

Horizontal Offset

–11.5 to 11.5 in. –29 to 29 cm

–15.4 to 15.4 in. –39 to 39 cm

–23.1 to 23.1 in. –59 to 59 cm

–30.8 to 30.8 in. –78 to 78 cm

–38.5 to 38.5 in. –98 to 98 cm

–46.1 to 46.1 in. –117 to 117 cm

–57.7 to 57.7 in. –147 to 147 cm

–76.9 to 76.9 in. –195 to 195 cm

Horizontal Offset

–14.1 to 14.1 in. –36 to 36 cm

4.7 to 10.1 feet

1.44 to 3.09 m

7.1 to 15.3 feet

2.18 to 4.66 m

9.6 to 20.4 feet

2.92 to 6.23 m

12 to 25.5 feet

3.66 to 7.79 m

14 Setting Up the Projector

40 in. (32 × 24 in.)

101.6 cm (81 × 61 cm)

60 in. (47 × 35 in.)

152.4 cm (120 × 90 cm)

80 in. (63 × 47 in.)

203.2 cm (160 × 120 cm)

100 in. (79 × 59 in.) 254 cm (200 × 150 cm)

11.1 in. 28 cm

16.7 in. 42 cm

22.2 in. 56 cm

27.8 in. 71 cm

35.1 in. 89 cm

52.7 in. 134 cm

70.2 in. 178 cm

87.8 in. 223 cm

–18.8 to 18.8 in. –48 to 48 cm

–28.2 to 28.2 in. –72 to 72 cm

–37.6 to 37.6 in. –96 to 96 cm

–47.1 to 47.1 in. –120 to 120 cm

4:3 aspect ratio (continued)

Projection distance

14.4 to 30.7 feet

4.40 to 9.36 m

18 to 38.4 feet

5.51 to 11.71 m

24.2 to 51.3 feet

7.36 to 15.62 m

Diagonal image size (width × height) Offset A Offset B

120 in. (94 × 71 in.) 305 cm (240 × 180 cm)

150 in. (118 × 91 in.) 381 cm (300 × 230 cm)

200 in. (161 × 118 in.) 508 cm (410 × 300 cm)

33.0 in. 85 cm

41.7 in. 106 cm

55.6 in. 141 cm

105.0 in. 268 cm

131.7 in. 334 cm

175.6 in. 446 cm

Horizontal Offset

–56.5 to 56.5 in. –143 to 143 cm

–70.6 to 70.6 in. –179 to 179 cm

–94.1 to 94.1 in. –239 to 239 cm

To determine the exact image size when you know the projection distance (or the exact projection distance when you know the desired image size), you can use the Image Size Calculator. This program is available on the Epson website at epson.com/support (U.S.) or epson.ca/support (Canada).

Also keep these considerations in mind:

■ Make sure there is plenty of space for ventilation around and under the projector. Do not

set the projector on top of loose materials that could block the vents underneath.

■ Make sure the projector is within 9.8 feet (3 m) of a grounded electrical outlet or

extension cord.

Setting Up the Projector 15

Installing the Projector

To install the projector, you first need to determine the location, based on the size of your screen (maximum diagonal image size). Use the tables on page 14 as a guide to positioning the projector.

To suspend the projector from a ceiling, you will need the optional projector mount designed for the projector. See page 10 for ordering information. Follow the instructions included with the mount to install the projector.

WARNING: When installing or adjusting the ceiling mount, do not use adhesives to prevent the screws from loosening and do not use any type of oil or lubricant. These may cause the projector casing to crack and the projector may fall, causing serious injury and serious damage to the projector.

If you install the projector on the ceiling, you will need to invert the picture so that it appears right side up. Follow these steps:

1. Press the

2. Open the

3. Select

4. Press the

Menu button on the remote control.

Settings menu, then select Projection.

Front/Ceiling.

Menu button when done.

Note that you can rotate the Epson logo plate 180 degrees when suspending the projector from a ceiling.

If you are planning to use an AV controller with the projector, refer to the table of ESC/VP21 command codes on page 69. In addition, the projector’s

out

port can be used to lower a projection screen or

Trigger

operate a motorized anamorphic lens (see page 48).

16 Setting Up the Projector

The following illustrations show the dimensions of the projector:

Center of lens

5.4 in.

36 mm

0.5 in.

.3 mm

0.2 in.

4.5 mm

1.8 in.

45 mm

17.7 in.

450 mm

11.8 in.

300 mm

5.9 in.

150 mm

2.2 in.

56 mm

5.2 in.

131 mm

3.0 in.

75 mm

2.8 in. 72 mm

5.3 in.

134.7 mm

5.8 in.

148.3 mm

M4× 9 mm

15.3 in.

6.3 in. 160 mm

389.7 m

Setting Up the Projector 17

Connecting the Cables

Connecting Video and Computer Equipment

You can connect the projector to many types of video equipment, such as a Blu-ray

™

/DVD player, digital tuner, cable or satellite box, video game console, camcorder, or

Disc digital camera. You can also connect it to a desktop or laptop PC or Apple system. For details on compatible video formats, see page 67.

You can connect up to six pieces of video equipment at the same time, using any of the commercially available cables shown below:

Port name Video equipment connection Computer connection

Macintosh®

HDMI 1/ HDMI 2

Component Use a component video cable

PC — Use a Mini D-sub, 15-pin monitor cable

S-Video Use an S-video cable: —

Video Use an RCA video cable: —

Use an HDMI cable:

—

(with RCA-style connectors):

Connect the cable to the three component video ports. Match corresponding colors between the cable and the ports.

to connect to a computer RGB (monitor) port:

18 Setting Up the Projector

For best results, connect your video equipment to the HDMI port, if possible. If your equipment doesn’t support HDMI, connect it to one of the following ports (highest quality listed first):

Component (for component video), S-Video, or Video (for composite video).

Connect video equipment to one of these ports

Connect a computer to one of these ports

When you connect a large or heavy cable to the projector, such as an HDMI cable, it is recommended that you fasten it to one of the two cable holders using a commercially available cable tie.

Setting Up the Projector 19

Making Other Connections

Connect the power cable and other cables described below, depending on how you plan to use the projector.

■ Plug the power cable into the projector and a grounded electrical outlet.

■ The Trigger out port outputs a 12-volt DC signal

when the projector is turned on. This lets a central

control system monitor whether the projector is on

or off, and can be used to raise or lower your

projection screen automatically when the projector

is in use. On the Home Cinema 8700 UB, it can

also be used to operate a motorized anamorphic

lens.

Connect a 3.5-mm mini jack to the port, as shown.

Use the

Trigger Out setting to enable the port (see

page 48).

■ To use an AV controller with the projector, connect a 9-pin null modem serial cable to

the

RS-232C port. Refer to the table of ESC/VP21 command codes on page 69.

20 Setting Up the Projector

Installing Batteries in the Remote Control

The remote control uses two AA batteries.

WARNING: Keep batteries away from children. If a battery is swallowed, contact your doctor immediately.

1. Release the tab and lift open the cover.

2. Insert two new AA batteries as shown.

3. Insert the tab on the cover and press it down until it

clicks into place.

Aim the remote control at the screen, or at the front or back of the projector. Make sure you are within 30 feet of the projector.

If you suspect the batteries are weak, press the illumination button. If the buttons do not glow, replace the batteries.

Turning the Projector On and Off

Turning On the Projector

1. Remove the lens cap.

2. Turn on any connected equipment you plan to use.

3. Turn on the main power switch on the back of the projector.

Setting Up the Projector 21

4. Press the Ppower button on the remote control or projector.

Remote control Projector

Note: To prevent children from turning on the projector, you can use the Child Lock feature. See page 32 for details.

If you’ll be using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude Mode so the fan can properly cool the projector at the high altitude air pressure. See page 49 for details.

The projector takes about 30 seconds to warm up and display an image. If you don’t see a picture, you may need to change the image source as described on page 23.

Turning Off the Projector

1. Turn off any equipment connected to the projector.

2. Press the Ppower button on the remote control or projector. When you see a

confirmation message, press the Ppower button again to turn the projector off.

Caution: Turn off this product when not in use to prolong the life of the projector. Continuous

24-hour-a-day use may reduce the overall life of the product.

3. If you need to move the projector, wait for the Ppower light to stop flashing, then turn

off the projector’s main power switch on the back. You can now unplug the projector.

Caution: Never turn off the main power switch without first turning off the projector and

letting it cool as described above, or you could damage it and reduce lamp life.

22 Setting Up the Projector

Selecting the Image Source

The source buttons on the projector and remote control let you switch between images from different pieces of equipment connected to the projector (such as a Blu-ray Disc/DVD player, cable or satellite box, or video game console).

Press the

Source button on the remote control that corresponds to the port to which your

video source is connected.

If you press the source button on the projector, you see a list of available sources. Press the source button to move through the list and select the desired source.

Note: If an image does not appear, see “Problem Solving” on page 58.

To temporarily turn off the image and darken the screen, press the Blank button on the remote control. Press the Blank button again to return to normal viewing.

Setting Up the Projector 23

Positioning the Image

If the image is not centered on the screen, use the horizontal and vertical lens shift dials to adjust its position.

Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the lens shift dials to change the lens position.

Horizontal lens shift dial

Vertical lens shift dial

Note: You can display a test pattern to help adjust the image position by pressing the Pattern button on the remote control. Press the Esc button to turn off the test pattern.

When you hear a click, the lens position is almost centered. If the lens shift dial becomes difficult to turn, you cannot adjust the position any further.

If one side of the image is taller than the other, make sure the projector is parallel to the screen. If necessary, adjust the front feet so that the projector is horizontal.

24 Setting Up the Projector

Adjustable feet

+ 56 hidden pages