822p
Table of contents
Loading...
Quick Setup
PowerLite
®
822p/83c
1 Unpack the projector
You should have the following items:
Projector Power cord
Computer cable
User’s Guide
CD-ROM
Password protect
sticker
Remote control
and batteries
2 Connect your video source
Connect the projector to a computer or video source using any of the available
connections shown below.
Check the connectors on your video equipment. If more than one
•
connection is available, choose the one that provides the best quality.
The projector connectors from highest to lowest quality are
Computer (Component Video), S-Video, and Video.
A computer cable is included. You can purchase optional video and
•
audio cables through Epson® or an electronics store.
You can connect up to 4 video devices and use the remote control to
•
switch between them.
Component
S-Video
cable
(optional)
RCA video cable
(composite video)
(optional)
video to
VGA cable
(optional)
Computer
cable
(included)
L-Audio-R
ports
Audio2 and Audio1 ports
You can also connect an external monitor to watch the display
NOTE
on your computer monitor while watching the projection screen
(when the computer cable is connected to the Computer1 port). To
enhance the sound in your presentation, you can connect external
speakers. See the
User’s Guide on your CD-ROM for instructions.
3 Set up the remote control
1 Remove the battery cover.
2 Insert the batteries.
3 Replace the battery cover.
The remote control is ready for use.
Loading...