EpiCom SXC-1180 User Manual

SXC-1180
CDMA 1x USB MODEM
Wherever you are. Wherever you need
참고사항
노트북에 제품(SXC-1180)을 직접 연결하여 사용하는 경우, LCD모니터에서 발생하
는 전자파에 의해 수신 감도가 저하되는 경우가 있습니다.
이 경우 제품과 함께 동봉된 USB연장 케이블을 연결해 사용하시기를 권장합니다.
Introduction
Congratulations on your purchase of the advanced and compact SXC­1180 USB Modem, designed to operate with the latest digital mobile communication technology.
For Your Safety
Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this manual.
Warning
• USB Modem must be switched off at all times in an aircraft.
• Do not use your Modem near petrol stations, fuel depots, chemical plants or blasting operations.
• For your safety, use ONLY specified note-book PC and desk-top PC
• Do not handle the modem with wet hands while it is being charged. It may
cause an electric shock or seriously Damage your modem.
• Keep the modem in a safe place out of small children’s reach. It includes small
parts which if detached may cause a choking hazard.
Caution
• Switch off the modem in any area where required by special regulations. For
example, do not use your modem in hospitals or it may affect sensitive medical equipment.
• Emergency calls may not be available under all cellular networks. Therefore,
you should never depend solely on the modem for emergency calls.
• Only use ORIGINAL accessories to avoid damage to your modem.
• All radio transmitters carry risks of interference with electronics in close
proximity. Minor interference may affect TVs, radios, PCs, etc.
This user’s guide contains important information on the use and operation of this phone. Please read all the information carefully for optimal performance and ro prevent any damage to or misuse of the USB Modem. Any changes or modifications not expressly approved in this user’s guide could void your warranty for this equipment.
1. Part of the USB Modem
Indicator LED
R-UIM Socket
USB CONNECTOR
Neck Strap
USB Cover
2. Product Specification
Function SXC-1180 Remarks
Main Operation Chip MSM6025,RFR6122, RFT6122
CDMA Standard
TIA/EIA/IS-2000, IS-98D, Backwards compatibility with IS-95 A/B
Cellular 800 Single Band Support Band Class 0 TX: 824 ~ 849 MHz
Frequency Band of Operation
RX: 869 ~ 894 MHz Transmit Power 200mW Power supply 4.5 ~5.5V DC USB Power Data Rate Up to 153 Kbps(FL:153Kbps / RL:153Kbps)
Feed through : Packet data, A sync data Data options
Protocol : SMS, Simple IP Connector&Switches USB Power input connector Hardware Interface USB 1.1 and 2.0 Software Interface IS-707.3 AT Command set LEDs 2 LED(Power) 3 Color LED
PRL/OT A support Phone book Use PC UI Application
Antenna Intenna Connector&Switches USB Power input connector Installation Noetbook/Desktop PC USB Interface Dimension W: 32 ,D:94.4 ,H:11.5 (mm) Weight Net( 20g),Gift box( TBD kg) TBD O/S SUPPORT Windows 2000, Windows XP(Option : WIN98SE)
3-1 Program install guide
1. The install program insert at CD-ROM drive
2. If waited, Auto run program start for install
3. If do not started install program, Use window search to install Setup.exe of
CD-ROM
4. The picture is install start program screen . Click Next
5. The picture is ready to install the program. Click Install, start program
6. Start the Dialer Client install program
7. The picture is install program finished
8-1. SIT_1x_usbmodem Device install(1).
- After installation process completing.
Connect the PC and the modem. And then the new hardware wizard is executed.
Click Install the software automatically and Next ,
And then modem driver is installed automatically.
8-2. SIT_1x_usbmodem Device install(2).
. - Below window comes out to hardware installation process.
Then Click continue Anyway.
8-3. SIT_1x_usbmodem Device install (3).
- The picture is SIT_1x_usbmodem Device install finished.
Loading...
+ 17 hidden pages