Epic EPEL79060 Owner's Manual
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
Serial Number
Decal
Model No. EPEL7906.0
Serial No.
Write the serial number in the space
above for reference.
USER’S MANUAL
QUESTIONS?
As a manufacturer, we are committed to providing complete customer
satisfaction. If you have questions,
or if parts are damaged or missing,
PLEASE DO NOT CONTACT THE
STORE; please contact Customer
Care.
IMPORTANT: You must note the
product model number and serial
number (see the drawing above)
before contacting us:
CALL TOLL-FREE:
1-866-997-6999
Mon.–Fri., 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
www.iconservice.com
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO USE THE ELLIPTICAL EXERCISER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WARNING DECAL PLACEMENT
2
The warning decal shown here has been
applied in the location shown. If the
decal is missing or illegible, call the
telephone number on the front cover
of this manual and request a free
replacement decal. Apply the decal in
the location shown. Note: The decal
may not be shown at actual size.
3
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over the age of 35 or
persons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of the elliptical exerciser are
adequately informed of all precautions.
3. Your elliptical exerciser is intended for
home use only. Do not use your elliptical
exerciser in a commercial, rental, or institutional setting.
4. Keep your elliptical exerciser indoors, away
from moisture and dust. Place your elliptical
exerciser on a level surface, with a mat
beneath it to protect the floor or carpet.
Make sure that there is enough clearance
around your elliptical exerciser to mount,
dismount, and use it.
5. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
6. Keep children under age 12 and pets away
from your elliptical exerciser at all times.
7. Your elliptical exerciser should not be used
by persons weighing more than 350 lbs.
(159 kg).
8. Wear appropriate exercise clothes when
exercising; do not wear loose clothes that
could become caught on your elliptical exerciser. Always wear athletic shoes for foot
protection.
9. Hold the handgrip pulse sensor or the upper
body arms when mounting, dismounting, or
using your elliptical exerciser.
10. Keep your back straight while using your
elliptical exerciser; do not arch your back.
11. The pulse sensor is not a medical device.
Various factors, including the user’s movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
12. When you stop exercising, allow the pedals
to slowly come to a stop.
13. If you feel pain or dizziness while exercising, stop immediately and cool down.
14. Use your elliptical exerciser only as
described in this manual.
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your elliptical exerciser before using your elliptical
exerciser. ICON assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.
IMPORTANT PRECAUTIONS
4
BEFORE YOU BEGIN
Thank you for purchasing the revolutionary EPIC
™
EL 1200 COMMERCIAL PRO elliptical exerciser.
The EL 1200 COMMERCIAL PRO elliptical exerciser
provides a wide array of features designed to make
your workouts at home more effective and enjoyable.
For your benefit, read this manual carefully before
you use the elliptical exerciser. If you have ques-
tions after reading this manual, please see the front
cover of this manual. To help us assist you, note the
product model number and serial number before con-
tacting us. The model number and the location of the
serial number decal are shown on the front cover of
this manual.
To avoid a registration fee for any service needed
under warranty, you must register the elliptical
exerciser at www.iconservice.com/registration.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Pulse Sensor
Ramp
Upper Body Arm
Pedal Disc
Wheel
Pedal
Water Bottle Holder*
Console
Handle
Fan
*No water bottle is included
5
ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included hex keys and your own Phillips screwdriver , adjustable
wrench , rubber mallet , and wire cutters .
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-
assembled. If a part is not in the parts bag, check to see if it has been preassembled.
#10 Fender
Washer (80)–12
5/16" x 2 1/2" Button
#8 x 1/2"
Screw (91)–6
3/8" Washer
Screw (88)–8
(84)–4
#8 x 3/4"
Screw (78)–10
Wave Washer
(95)–4
#10 x 1/2"
Screw (79)–12
3/8" x 3/4" Patch
Screw (104)–2
3/8" x 2 1/2" Button
Bolt (90)–4
3/8" x 1" Patch
Screw (81)–2
6
1.
With the help of another person, place two cardboard inserts and foam from the packing material under the rear of the Frame (1) so that the
Frame is lifted off the floor. Have another per-
son hold the elliptical exerciser to prevent it
from moving from side to side until this step
is completed.
Attach the Rear Stabilizer (3) with four 5/16" x 2
1/2" Button Screws (88). Then, remove the
cardboard inserts and lower the Rear Stabilizer.
3. Remove six #8 x 3/4" Screws (78) and the Front
Lift Cover (46). Set the Screws and the Front
Lift Cover aside until step 4.
3
1
2. With the help of another person, place two cardboard inserts and foam from the packing material under the Frame (1) so that the Frame is
lifted off the floor. Have another person hold
the elliptical exerciser to prevent it from
moving from side to side until this step is
completed.
Attach the Front Stabilizer (2) with four 5/16" x 2
1/2" Button Screws (88). Then, remove the
cardboard inserts and lower the Front Stabilizer.
2
To make assembly easier, read the
information on page 5 before you begin
assembling the elliptical exerciser.
88
88
2
1
88
78
78
46
88
3
1
5. Attach the Bottle Holder (61) with two #8 x 1/2"
Screws (91).
7
5
4. Tip: Be careful not to pinch the Wire
Harnesses (102, 54) during this step. Start
all screws before tightening any of them.
Attach the Upright (6) to the Frame (1) with four
3/8" x 2 1/2" Button Bolts (90). Then, connect
the Upper Wire Harness (102) to the Lower
Wire Harness (54).
See step 3 and reattach the Front Lift Cover
(46) with the six #8 x 3/4" Screws (78).
4
90
90
54
61
91
102
6
1
Avoid pinching the
Wire Harnesses
(102, 54) during
this step
8
7. Identify the Left Upper Body Arm (12), which is
marked with an “L” sticker. Attach an Inner
Body Arm Cover (53) to the Left Upper Body
Arm with two #8 x 3/4" Screws (78).
Repeat this step for the Right Upper Body
Arm (not shown).
7
6
6. Identify the Left Pedal (62), which is located in a
package marked with a “Left” sticker. Attach the
Left Pedal to the Left Pedal Arm (8) with six #10
x 1/2" Screws (79) and six #10 Fender Washers
(80).
Repeat this step for the Right Pedal (63).
80
80
62
63
79
79
78
53
12
80
8
9
9. Attach a Pivot Cap (64) to an Outer Body Arm
Cover (52) with two #8 x 1/2" Screws (91).
Attach the Outer Body Arm Cover (52) to the
Left Upper Body Arm (12) with three #8 x 3/4"
Screws (78).
Repeat this step for the right side of the
elliptical exerciser.
9
8. Orient the Left Upper Body Arm (12) and the
Left Link Arm (10) assembly as shown. Apply a
generous amount of the included grease to the
left axle on the Upright (6) and to the axle on
the Left Link Arm. Then, place a Weld Spacer
(89) on the Left Link Arm; orient the Weld
Spacer so that the wide side faces the Left
Link Arm.
Apply a small amount of grease to two Wave
Washers (95). Place one Wave Washer on the
Upright (6) and place the other Wave Washer
on the Left Link Arm (10).
With the help of another person, work the Left
Upper Body Arm (12) onto the axle on the
Upright (6) and the Left Link Arm (10) into the
Left Pedal Arm (8) at the same time.
Attach the Left Upper Body Arm (12) with a
3/8" x 3/4" Patch Screw (104) and a 3/8"
Washer (84). Attach the Left Link Arm (10) with
a 3/8" x 1" Patch Screw (81), a Small Axle
Cover (67), and a 3/8" Washer (84). Tip: If you
have a hard time working the Left Link Arm
all the way into the Left Pedal Arm (8), try
working the Left Link Arm in halfway and
then tightening the 3/8" x 1" Patch Screw to
pull the Link Arm the rest of the way in.
Repeat this step for the Right Upper Body
Arm (13) and the Right Link Arm (11).
8
84
6
Grease
Grease
12
13
81
84
67
10
11
89
95
95
104
12
8
64
91
52
78
13
10. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be
left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the
elliptical exerciser.
Plug the power cord into the power socket at the front of the elliptical exerciser (see HOW TO PLUG IN THE
POWER CORD on page 10). IMPORTANT: If the elliptical exerciser has been exposed to cold tempera-
tures, allow it to warm to room temperature before plugging in the power cord. If you do not do this,
the console displays or other electronic components may become damaged.
The ramp will calibrate automatically when the elliptical exerciser is plugged in for the first time.
Loading...