EPCOS B32321, B32323 User Manual

Film capacitors – AC capacitors
Motor run capacitors
250 V; class B; 85 °C / 400 V; class B; 85 °C / 480 V; class C; 85 °C
Series/Type: B32321/B32323 MotorCap™
Ordering code:
Date: July 2007 Version: 1.0
Identification/Classification 1: (header 1)
Identification/Classification 2: (header 2)
Ordering code:
Series/Type: B32321/B32323 MotorCap™
Preliminary data (optional): (if necessary)
Department: FK PC PM AC
Date: July 2007
Film capacitors – AC capacitors
Motor run capacitors
© EPCOS AG 2007. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.
Film capacitors – AC capacitors
Motor run capacitors B32321/B32323 MotorCap™
UL type (construction only) Construction
Dielectric: polypropylene film Plastic can and top UL 94 V2 material Dry type
Features
Self-healing properties Low dissipation factor P0 safety class to IEC 60252-1 2001-02 High insulation resistance UL file E 183224 (construction only)
Typical applications
For general sine wave applications,
mainly as motor run capacitor
Terminals
B32321 – Single Fast on: 6.3 × 0.8 mm B32323 – Double Fast on: 6.3 × 0.8 mm
Mounting parts (optional)
Threaded stud at bottom of can (M8, max. torque = 5 Nm) Fast fixation for mounting into a hole of Ø 8 mm
Technical data and specifications
Reference standards IEC 60252-1 2001-02 / UL 810 Safety class according IEC 60252-1 2001-02 P0 Life expectancy to IEC 60252 2001 250 V / 85 °C: 10,000 h (class B)
400 V / 85 °C: 10,000 h (class B) 480 V / 85 °C: 3,000 h (class C)
UL 810 file E 183224
Construction only
for Nashik and Gravatai plant Rated capacitance C
R
Tolerance Rated voltage V Rated frequency f
FK PC PM AC July 2007
Please read the important notes, Page 2 of 9 cautions and warnings.
R
R
See dimensions table ±5% 250 V AC, 400 V AC, 480 V AC 50 / 60 Hz
Film capacitors – AC capacitors
Motor run capacitors B32321/B32323 MotorCap™
Maximum ratings
Maximum permissible voltage V Maximum permissible current I
max
max
1.1 · V
1.3 · I
(VR= Rated voltage)
R
R
(IR= Rated current)
Test data AC test voltage terminal to terminal V
Insulation resistance R
or time constant τ
ins
TT
2 · VR, 2 s (routine test)
, 60 s (type test)
2 · V
R
3,000 s
at 20 °C, rel. humidity 65% (minimum as delivered values)
Dissipation factor tan δ at 20 °C 1.0 ·10-3 (120 Hz) Maximum rate of voltage rise dV/dt
max
10 V/μs
Climatic data
Climatic category 25/085/21 to IEC 60068-1 Lower category T Upper category T Damp heat test t
min
max
test
–25 °C +85 °C 21 days
Mechanical and thermal properties
Ball pressure test to IEC 60309-1 sec. 27.3 20 N at 125 °C Plastic can and top disk material UL 94 V2 minimum
UL 94 V2 compatible Glow wire test to IEC 60695-2-1/0 and –2-1/1
Test temp 550 °C for I Test temp 750 °C for I
0.5 A
R
> 0.5 A
R
Self extinguish within 30 seconds of withdrawing the glow wire and without igniting wrapping tissue.
Tracking test to IEC 60112 solution A > 250 V Compatibility to RoHS Compliance to directive 2002/95/EC
FK PC PM AC July 2007
Please read the important notes, Page 3 of 9 cautions and warnings.
Film capacitors – AC capacitors
Motor run capacitors B32321/B32323 MotorCap™
Approvals VDE EN 60252
400 V / 85 °C: 10,000 h (class B) 480 V / 85°C: 3,000 h (class C)
UL 810 E183224
250 V 400 V 480 V
Approved Approved
Approved Approved Approved
FK PC PM AC July 2007
Please read the important notes, Page 4 of 9 cautions and warnings.
Film capacitors – AC capacitors
Motor run capacitors B32321/B32323 MotorCap™
Dimensional drawings
B32321 B32323
Mounting options
# = 1: Can without mounting
# = 3: Can with M8 bolt
10
Stud M8x1.25
Star Washer 8mm
Nut M8x1.25
FK PC PM AC July 2007
# = 5: Fast fix mounting
M8-sized
M-Clip
fast
fixation
5 0
. 0 ± 0
. 2
10
Ø8.2+0.2/-0
Ø2.2+0.1/-0
10
0
-
/ 1
. 0 + 2
. 0 1
Please read the important notes, Page 5 of 9 cautions and warnings.
Film capacitors – AC capacitors
Motor run capacitors B32321/B32323 MotorCap™
Ordering codes and packing units
VR
V AC
250 2 25 × 58 30 × 62 B3232*C1205J0#0 112
3 25 × 58 30 × 62 B3232*C1305J0#0 112
4 25 × 58 30 × 62 B3232*C1405J0#0 112
5 25 × 58 30 × 62 B3232*C1505J0#0 112
6 25 × 58 30 × 62 B3232*C1605J0#0 112
7 25 × 58 30 × 62 B3232*C1705J0#0 112
8 25 × 58 30 × 62 B3232*C1805J0#0 112
9 30 × 62 30 × 62 B3232*C1905J0#0 112
10 30 × 62 30 × 62 B3232*C1106J0#0 112
12 30 × 62 30 × 62 B3232*C1126J0#0 112
14 30 × 62 30 × 62 B3232*C1146J0#0 112
15 30 × 62 30 × 62 B3232*C1156J0#0 112
16 35 × 62 35 × 62 B3232*C1166J0#0 84
CR
μF
Max. dimensions
d × l (mm)
B32321
Max. dimensions
d × l (mm)
B32323
Ordering code Packing units
pcs.
18 35 × 62 35 × 62 B3232*C1186J0#0 84
20 35 × 62 35 × 62 B3232*C1206J0#0 84
22 35 × 62 35 × 62 B3232*C1226J0#0 84
25 35 × 71 35 × 71 B3232*C1256J0#0 84
30 35 × 71 35 × 71 B3232*C1306J0#0 84
35 40 × 71 40 × 71 B3232*C1356J0#0 60
40 40 × 71 40 × 71 B3232*C1406J0#0 60
45 40 × 71 40 × 71 B3232*C1456J0#0 60
50 40 × 95 40 × 98 B3232*C1506J0#0 60
55 40 × 95 40 × 98 B3232*C1556J0#0 60
60 40 × 95 40 × 98 B3232*C1606J0#0 60
FK PC PM AC July 2007
Please read the important notes, Page 6 of 9 cautions and warnings.
Film capacitors – AC capacitors
Motor run capacitors B32321/B32323 MotorCap™
V
R
V AC
400 2 25 × 58 30 × 62 B3232*B4205J0#0 112
3 25 × 58 30 × 62 B3232*B4305J0#0 112
4 25 × 58 30 × 62 B3232*B4405J0#0 112
5 30 × 62 30 × 62 B3232*B4505J0#0 112
6 30 × 62 30 × 62 B3232*B4605J0#0 112
7 35 × 62 35 × 62 B3232*B4705J0#0 84
8 35 × 62 35 × 62 B3232*B4805J0#0 84
9 35 × 62 35 × 62 B3232*B4905J0#0 84
C µF
R
Max. dimensions
d × l (mm)
B32321
Max. dimensions
d × l (mm)
B32323
Ordering code Packing units
pcs.
10 35 × 62 35 × 62 B3232*B4106J0#0 84
12 35 × 71 35 × 71 B3232*B4126J0#0 84
14 35 × 71 35 × 71 B3232*B4146J0#0 84
15 40 × 71 40 × 71 B3232*B4156J0#0 60
16 40 × 71 40 × 71 B3232*B4166J0#0 60
18 40 × 71 40 × 71 B3232*B4186J0#0 60
20 40 × 71 40 × 71 B3232*B4206J0#0 60
22 40 × 71 40 × 71 B3232*B4226J0#0 60
25
30
40 × 95 40 × 95
40 × 95 40 × 95
B3232*B4256J0#0 60
B3232*B4306J0#0 60
35 45 × 95 45 × 95 B3232*B4356J0#0 45
40 45 × 95 45 × 95 B3232*B4406J0#0 45
45 45 × 95 45 × 95 B3232*B4456J0#0 45
50 45 × 95 45 × 98 B3232*B4506J0#0 45
55 45 × 95 45 × 98 B3232*B4556J0#0 45
60 45 × 95 45 × 98 B3232*B4606J0#0 45
FK PC PM AC July 2007
Please read the important notes, Page 7 of 9 cautions and warnings.
Film capacitors – AC capacitors
Motor run capacitors B32321/B32323 MotorCap™
VR
V AC
480 3 30 × 62 30 × 62 B3232*B7305J0#0 112
4 30 × 62 30 × 62 B3232*B7405J0#0 112
5 30 × 62 30 × 62 B3232*B7505J0#0 112
6 35 × 62 35 × 62 B3232*B7605J0#0 84
7 35 × 71 35 × 71 B3232*B7705J0#0 84
8 35 × 71 35 × 71 B3232*B7805J0#0 84
9 35 × 71 35 × 71 B3232*B7905J0#0 84
10 40 × 71 40 × 71 B3232*B7106J0#0 45
CR
µF
Max. dimensions
d × l (mm)
B32321
Max. dimensions
d × l (mm)
B32323
Ordering code Packing units
pcs.
12 40 × 71 40 × 71 B3232*B7126J0#0 45
15 45 × 71 45 × 71 B3232*B7156J0#0 45
18 45 × 71 45 × 71 B3232*B7186J0#0 45
20 45 × 71 45 × 71 B3232*B7206J0#0 45
22 45 × 71 45 × 71 B3232*B7226J0#0 45
25 45 × 95 45 × 95 B3232*B7256J0#0 45
30 45 × 95 45 × 95 B3232*B7306J0#0 45
35 45 × 95 45 × 95 B3232*B7356J0#0 45
40 45 × 95 45 × 95 B3232*B7406J0#0 45
Composition of ordering code:
*: Terminals 21 single fast on terminals 23 double fast on terminals
#: Construction 1 plastic can 3 plastic can with M8 bolt 5 plastic can with fast fixation device, available for diameters 30 mm, 32 mm and 35 mm, others on request
U
Please read “Applications warning, installation and maintenance instructions” and the “General Safety Data Sheet for Power
Capacitors” issued by ZVEI, which are available on the internet at www.epcos.com/ac_capacitors, to ensure optimum performance and to prevent products from failing, and in worst case, bursting and fire. Information given in the data sheet reflects typical specifications. You are kindly requested to approve our product specifications or request our approval for your specification before ordering.
FK PC PM AC July 2007
Please read the important notes, Page 8 of 9 cautions and warnings.
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
FK PC PM AC July 2007
Page 9 of 9
Loading...