IP66 PLINK Datasheet
51256
For latest version visit:
www.enttec.com
Jul-18 ID: 4083270 1
IP66 PLINK INJECTOR (PJ1-56)
IP66 PIXEL LED DRIVER
Functional Features
• IP66 PLINK supports a variety of smart pixel
tape and dots
• Data extensions up to 300 meters over cat6
cable
• Each PLINK run allows a maximum of 1024
DMX channels (2 universes) to be driven;
this can be used to control 340 RGB
individual pixels (or 256 RGBW pixels)
• This device is compatible with ENTTEC
Pixelator family.
• Requires an external DC power supply
• Scalable design for large projects
• Ideal for custom pixel LED installations
Mechanical Features
• Machined 6061 aluminium enclosure - light
weight, rugged, impact resistant, long
lasting, corrosion resistant, UV resistant)
• Anodise type II closure treatment and 2 step
electrolytic dying - excellent outdoor
resilience, corrosion resistant, colour will
resist fading caused by UV exposure
• 304 stainless fasteners (corrosion resistant)
• Self-retaining screws (screws will not be
lost when installing)
• Premium cable glands (nylon, cable
diameter Ø3mm to 10mm for installation
flexibility)
IP66 PLINK Datasheet
51256
For latest version visit:
www.enttec.com
Jul-18 ID: 4083270 2
• Fixed cable glands for easy use (cable
glands will not rotate when tightening)
• Breath seal (automatic pressure
equalisation, manages condensation to
avoid electronic failures)
• IP66 enclosure (powerful water jets, high
pressure washdown resistant)
• High power screw down cage terminal
blocks for secure wiring
• Krone punch down terminals for fast secure
data wiring
• External earthing thread – reduces
electronic failures
• Broad operating temperature (suitable for
various environments)
• Multiple fixing points (flexible installation)
Safety
• Never plug PLINK ports in to Ethernet
outlets.
• Make all the connections before you plug in
the main power supply.
• Do not exceed the max. ratings of the device.
Notes:
▪ Plink system only works with CAT5/6 straight-through cables, do
not use crossover cables.
Physical Dimensions
Hardware Terminal Specifications
• Power supply and output connection:
Green terminal blocks
Wire strip length: 8mm
IP66 PLINK Datasheet
51256
For latest version visit:
www.enttec.com
Jul-18 ID: 4083270 3
• Plink Data connection: Punch down
terminals, use a krone punch down tool.
• Plink Pinout
Plink Punch down pinout
Wire Colour
DMX Signal
Orange/White
Data A+
Orange
Data B-
Brown/White
GND
Voltage Specification
• IMPORTANT! VOLTAGE INPUT SETTING
This product has 2 settings for the voltage
input, 5V and 12-60V. If the voltage is not
correctly set this product will fail. See below
for correct positions.
Specifications
Item
Details
Input Voltage
5V to 60V DC
Maximum Total
Output Power
5 V
50 W
60 V
130 W
Output Current
(Max) Per Pin
(Screw Terminal)
10 A per Channel
Data In
PLINK
Data Through
PLINK
Data Refresh Rate
400 Hz
Ambient Operating
Temperature
-15 o C to 40 o C
-15 o C to 60 o C (IF NOT IN DIRECT
SUNLIGHT)
Storage
Temperature
-20 o C to 80 o C
Humidity
5% to 95%
IP Rating
IP66
Unit Weight
625 g / 1.378 lb
Shipped weight
840 g/ 1.85 lb
Length
161.20 mm/ 6.35 inches
Width
120 mm/ 4.72 inches
Height
39 mm/1.54 inches
Internal
Connectors
4-way punch down (suits
krone) x 1
2 pin screw terminal x 1
3 pin screw terminal x 1
Due to continuous improvements and innovations of
all ENTTEC products, specifications and features are
subject to change without notice
Ordering Information
Part Number
Description
73923
IP66 PLINK Injector (PJ1-56)
Set for 5V input
Set for 12V – 60V input
IP66 PLINK Datasheet
51256
For latest version visit:
www.enttec.com
Jul-18 ID: 4083270 4
Possible Application Diagram
Possible End to End IP Solution
Loading...