Enttec Pixelator User Manual
E N E CT T
Pixelator
One LED Controller to rule them all
The Pixelator is the world's foremost Ethernet - Pixel Link converter. A high density device when you
need to convert large amounts of DMX Over Ethernet data into Pixels while keeping costs under
control. Ideal for any LED pixel mapped project using pixel tape or pixel dots.
DISCLAIMER This brochure is for general marketing purposes only and should not be relied upon as being complete or accurate.
www.enttec.com
ENTTEC PTY LTD
Head office : 7 Macro Court
Rowville VIC 3178 Australia
Tel : +61 3 9763 5755
Fax : +61 3 9763 5688
sales@enttec.com
ENTTEC EUROPE
F22-26 Parkhall Business Centre
40 Martell Road
London SE21 8EN, UK
Tel : +44(0) 2070616210
sales@enttec.co.uk
Controls . Lights . Solutions
ENTTEC AMERICAS
604A Cornerstone Ct.
Hillsborough NC27278 USA
Tel & Fax : (888) 454-5922
sales.americas@enttec.com
E N E C T T
Pixelator
Performance in every pixel
No more image ghosting or jumpy updates of your content. No other device offers
this level of performance in such a compact form factor. It supports WS2812B and
APA-104 LED protocols, so you can connect ENTTEC pixel tape to the pixel link ports
(using PLink Injector and external power). Using state of the art FPGA
programmable Logic, ultra fast DDR memory and Gigabit ethernet, all 24 Pixel
outputs are synchronised when using Sync mode.
www.enttec.com
► Plink (Pixel Link)
Plink allows the use of PLink Injectors to
connect ENTTEC Pixel Tapes and Pixel Dots
to your Pixelator. Available in 5V , 12V and
24V, each PLink
Injector can be
used with a DC
power supply to
connect the Pixel
Tape to one
PLink port on
Pixelator.
► 8160 Pixels per unit -
48 Universes
Pixelator gives you control of up to 8160
pixels using 48 Universes of Ethernet. Each
Plink port will drive up to 340 individual pixel
leds (2 Universes). Each port gives the option
of grouping up to 340 physical leds into 1
DMX pixel (RGB), reducing the number of
DMX channels needed.
► Features
● All configurations are made
through web browser.
● Graphical user interface for
creating and editing ports is
flow-chart oriented and documents
data flow as you configure it.
● Clock module to sync multiple
universes output
● DMX Generator and Stream
snapshot (web)
Dimensions
H 43.6 mm / W 463 mm / D 250 mm
PART NUMBERS
70060 - Pixelator
70704 - Stream Auditor License
73546 - Plink Injector 5V
73544 - Plink Injector 12V-24V
73545 - PixieLinker (5V)
► Multi-protocol support
● ArtNet 1/2/3
● SACN
● ESP
● Kinet
► Input / Output
● 24 Plink output ports on Rj45
(Pixel Link Data)
● 1 Gigabit Ethernet port
● Jumbo frame support
● 1 RS232 input for profile selection
via serial command
Loading...