Enttec D-Split 3 Pin and 5 Pin Version DMX splitter, D-SPLIT 5 Pin Version DMX splitter Enttec DSPLIT handleiding
Datasheet
70572 AND 70575
For latest version visit:
www.enttec.com
1
ID: 4007853
D-SPLIT
General Information
D-SPLIT is an optical isolator/splitter for DMX 512.
It allows the user more flexibility in connecting DMX-
controlled devices. Instead of having to make them all fit
within a single daisy chain, each of the four outputs from
the D-SPLIT can be the start of its own chain, and multiple
D-SPLITs can be linked together if needed.
Features
• Lightweight and portable
• 1 DMX input, 4 DMX outputs, all optically iso-
lated (protects against up to 1000V of stray voltage)
• DMX512-1990 compatible
• Controls up to 512 channels
• LED indicators show Power and DMX output
• External 7.5V power supply (included)
• Provides two 5-PIN and two 3-PIN outputs for
greater flexibility (70572)
• Provides all 5-PIN DMX outputs (70575)
• DMX Input is 5-PIN only on both models
Please note: D-Split does not support RDM
Technical Specifications
Item
Value
Input Voltage
7.5V supplied by external power
supply
Maximum Current
300mA
Output Type
Data (DMX)
Input Type
Data (DMX)
Max Output
Channels
1 universe (512ch)
Supported
Protocols
DMX512-1990
Operating
Temperature
0° to 50°C in
non-condensing environment
Connectors
(70575)
1x 5 Pin DMX Input
4x 5 Pin DMX output
Connectors
(70572)
1x 5 Pin DMX Input
2x 3 Pin DMX output
2x 5 Pin DMX output
DMX connector
pin OUT
Pin 1: Ground
Pin 2: Data –
Pin 3: Data +
Pin 4: NC
Pin 5: NC
Datasheet
70572 AND 70575
For latest version visit:
www.enttec.com
2
ID: 4007853
Wiring Schematic
Physical Details
Item
Value
Width:
114mm / 4.50 inches
Height
52mm / 2.04 inches
Depth
89mm / 3.50 inches
Weight
0.3 kg / 0.66 lbs
Shipped Weight
0.4 kg / 0.88 lbs
Due to continuous improvements and innovations of all
ENTTEC products, specifications and features are subject
to change without notice. For the latest version of this manual contact your local ENTTEC vendor.
Ordering Information
DSPLIT and related products can be ordered from our
website or through your ENTTEC dealer using the following
part numbers.
Item
Name
70572
D-SPLIT (3PIN AND 5PIN OUTPUT)
70575
D-SPLIT (ALL 5 PIN OUTPUT)
79122
5 PIN DMX TERMINATOR
79123
3 PIN DMX TERMINATOR
70029
3 PIN FEMALE TO 5 PIN MALE
70023
3 PIN MALE TO 5 PIN FEMALE
79111
7.5V POWER SUPPLY (SPARE PART)
Loading...