Enttec 8PXW60-F-12-B Data Sheet
Preliminary Datasheet
8PXW60-F-12-B
For latest version visit:
www.enttec.com
1
ID: 4555208
Black pixel strip RGBW
8PXW60-F-12-B
Features
• RGBW, 4 in 1 full colour LED pixel strip.
• Addressable led pixels, suitable for stage, en-
tertainment and architectural applications
• 20 Pixels/meter
• 60 LEDs/meter
• Designed for use with ENTTEC Pixel Link System
• Maximum 20 Watts/Metre
• Maximum 511 Lumens/Metre
• IC UCS2904 compatible with WS2812B
• 5050 RGB LEDs
• 256 greyscale display resolution and scan fre-
quency not less than 1.5KHz/s
• 3M adhesive double side tape at the back
• Built-in data signal reshaping circuit
• 12V DC input supply voltage
• Flexible construction material
• Small LED pitch
• Can be joined together
• Can be cut into a smaller length
• IP20 Indoor use only
• 12.8m run for individual R/G/B colour without
power injection
• Refer to installation guide for more run length
info
Safety
• Do not expose this strip to rain
• Do not allow liquid to build up around the strip.
• Do not exceed the rated 12V DC power supply.
• Please adhere to installation instruction sheet
• This unit is intended for indoor use only, use of
this product outdoors voids all warranties.
• Do not put excess pressure on the strip, as it can
damage the LEDs.
Specifications
Item
8PXW60-F-12-B
Input Voltage
+12V ~ +12.3VDC
Data line Voltage
-0.5V ~ VCC+0.5V
Watts/meter (max)
Red
5.6
Green
5.9
Blue
5.8
All (RGB)
13.8
White
5.8
Total
19.7
Lumens/meter
RGB: 274
W: 236
Total: 511
Efficacy (Lm/Watt)
25.9
DMX Channels/LED
4
Beam angle
120 °
Control protocol
UCS2904
Connector
JST SM connectors
Weight (5m roll)
250g
Operating
temperature
5°C to 50°C
Pixel Mapping
Order
GRBW
Front polymer encapsulation seal
No
IP rating
IP20
PCB color
Black
Preliminary Datasheet
8PXW60-F-12-B
For latest version visit:
www.enttec.com
2
ID: 4555208
White temperature
4050K – 4250K
Note
Power measurements calculated using 1m Strip driven
at 12V.
Physical Dimensions
Connections with Pixie Driver:
Notes:
• The middle wire of the tap JST connector is al-
ways DATA regardless of color
• It is important to turn off the mains to the de-
vices before doing any led strip connections.
Connections with Plink Injector:
Notes:
• The wire in the middle of a JST connector is al-
ways DATA regardless of color
• It is important to turn off the mains to the de-
vices before doing any led strip connections.
Ordering Information
Item
Value
70060
Pixelator
70066
Pixelator Mini
71066
Pixelator Mini – PX1-8D
73542
PIXIE DRIVER 12V (65 WATTS)
73543
PIXIE DRIVER 12V (130 WATTS)
73544
Plink Injector 12V
76302-16
Pixel Port 12V (65 WATTS)
75008-16
PSAT 12V (65 WATTS)
8PXW60-F-12-B
RGBW PIXEL STRIP 60 LEDS/METER
12V - 5M Roll BLACK NO COATING
The ENTTEC 8P Pixel strips and compatible products
can be ordered from our website or through your
ENTTEC dealer.
Color Gamut Chart
Loading...