Enttec 8PW30-F, 8PW60-F Data Sheet

Datasheet

50903

For latest version visit:

www.enttec.com

1

ID: 823406

ENTTEC 8PW Pixel Strips

Features

• Cool White, Warm White and Amber, 3 in 1 color

temperatures adjustable LED

• Individually addressable, suitable for stage and

architectural applications

• Available in two different densities: 30 and 60

Pixels/Metre

• Compatible with ENTTEC Pixel Controllers

• Up to 11.5 Watt/Metre

• Up to 300 Lumens/Metre

• In-built WS2812 & WS2812B compatible chips

into 5050 RGB LEDs

• Each pixel can achieve 16,777,216 full colour dis-

play and scan frequency non less than 400Hz

• 3M adhesive double side tape at the back

• Built-in data signal reshaping circuit

• 5V DC input supply voltage

• Flexible construction material

• Front Polymer encapsulation seal

• Small LED pitch

• Can be joined together

• Can be cut to a smaller length

• IP20 Indoor use only

Safety

• Do not expose the units to rain

• Do not allow water or other liquids to build up

around the strip.

• Do not exceed the rated 5V DC power supply.

• This unit is intended for indoor use only, use of

this product outdoors voids all warranties.

Specifications

Item

8PW30

8PW60

Input Voltage

+4.5V ~ +5.3VDC

Dataline Voltage

-0.5V ~ VCC+0.5V

Watts/meter

5.6W

11.5W

Watts/meter per chan­nel

Wcool: 1.89

Amber: 1.88

Wwarm: 1.86

Wcool: 3.81

Amber: 3.82

Wwarm: 3.83

Lumens/meter

Wcool: 68
Amber: 14

Wwarm: 70

Wcool: 129

Amber: 32

Wwarm: 138

Efficacy (Lm/Watt)

27.2

26.2

DMX Channels/LED

3

Color temperatures

Cool White:7500K

Amber: 1765K

Warm White: 3200K

Beam angle

120 °

Control protocol

WS2812B

Connector

JST SM connectors

Weight

263g

Operating tempera­ture

5-50°

Pixel Mapping Order

Wcool+ Amber + Wwarm

Front polymer encap­sulation seal

Yes

IP Rating

IP20

PCB Color

White

Datasheet

50903

For latest version visit:

www.enttec.com

2

ID: 823406

Physical Dimensions

8PW pixel strip comes in a standard package of 5 meter
roll.

30 Pixels/meter

60 Pixels/meter

Connections with Pixie Driver:

The below diagram shows a standard connection
between 8PW and ENTTEC Pixie Driver. It is important to
turn down the devices before doing any connections.

Ordering Information

The ENTTEC LED strips and compatible products can be or­dered from our website or through your ENTTEC dealer.

Item

Value

73540

PIXIE DRIVER 5V (110 WATTS)

73541

PIXIE DRIVER 5V (55 WATTS)

8PW60-F

WWA (CTA+AMBER) PIXEL STRIP 60
LEDS/METER 5V - 5M Roll

8PW30-F

WWA (CTA+AMBER) PIXEL STRIP 30
LEDS/METER 5V - 5M Roll