Enttec 8PL30-F Datasheet
Data Sheet
Rev B, 12/11/2013
Document PN: 50528
For latest manual version visit:
www.enttec.com
ENTTEC
S M A R T R G B P I X E L T A P E S : 3 0 , 6 0 A N D 1 4 4 L E D S / M E T R E
PIXEL Tapes
Features
• Available in three different densities: 30, 60 and
144 Pixels/Metre
• Designed for ENTTEC Pixie Driver
• Up to 27 Watt/Metre
• Up to 586 Lumens/Metre
• In-built WS2812 & WS2812B compatible chips
into 5050 RGB LEDs
• Each pixel can achieve 16,777,216 full colour
display and scan frequency non less than 400Hz/s
• 3M adhesive double side tape at the back
• Built-in data signal reshaping circuit
• 5V DC input supply voltage
• Flexible construction material
1
Data Sheet
Ite m 8PL30 8PL60 8PL144
Input Voltage (VCC) +4.5 to +5.3 VD C
Data line Volt age -0.5 to V CC +0.5
Watt / Metre (m ax.) 5.6 11.3 27
Lum ens / Metre (m ax.) 122 244 586
Beam Angle 120°
Control Protocol WS2812 & WS2812b
5m Re el shipping Weight (Kg) 0.3
Operation Temperature 0° to 50° C
Pixel mapping order GRB (Green, Red, Blue)
Ite m Part Number
30 LEDS/METER Pixel tape - 1 Meter long 8PL30-1
30 LEDS/METER Pixel tape - 5 Meter Roll 8PL30-F
60 LEDS/METER Pixel tape - 1 Meter long
8PL60-1
60 LEDS/METER Pixel tape - 5 Meter Roll 8PL60-F
144 LEDS/METER Pixel tape - 1 Meter long
8PL144-1
144 LEDS/METER Pixel tape – 2 M eter Roll
8PL144-2
Rev B, 12/11/2013
Document PN: 50528
For latest manual version visit:
www.enttec.com
Physical Dimensions
The tapes come in five metres reels, and can be cut by
metres.
30 LED/Metre:
60 LED/Metre:
Specifications
Due to continuous improvements and innovations of all ENTTEC products, specifications and features are subject to change without notice.
Ordering Information
The ENTTEC Pixel Tape and compatible products can be
ordered from our website or through your ENTTEC dealer
using the following part numbers.
144 LED/Metre:
ENTTEC PTY LTD ENTTEC AMERICAS
17/5 Samantha Court 604A Cornerstone Ct.
Knoxfield Victoria 3180 Hillsborough NC 27278
Australia USA
Tel: +61 3 9763 5755 Tel-Fax: (888) 454-5922
Fax: +61 3 9763 5688 email sales@enttec.com
www.enttec.com
2
Loading...