Enttec ALEPH1, 79350, 79351, 79352, 79353 User Manual

User Manual

rev B

Document PN: 50386

ALEPH1

CONTROLLERS

T O U C H I N T E R F A C E C O N T R O L L E R S F O R A L E P H 1 L E D L I G H T S

7 9 3 5 0 / 7 9 3 5 1 / 7 9 3 5 2 / 7 9 3 5 3 / 7 9 3 5 4

Features

• Touch-screen interface

• RGB and single colour strip dimming

• Up to 24 changing patterns or modes

• Auto sensing 12 to 24V DC

• Constant voltage PWM signal output

• Smooth dimming

• Power-loss memory recovery function

Introduction

The ALEPH1 interface touch controllers range is designed to
control RGB and single colour LED luminaries featuring a
unique touch interface technology with the function keys.
User does not need to have even small pressure on the keys
to create colour patterns.

This user oriented controller range can make automatic
recognition of 12 or 24V DC and with PWM in-built MCU can
perform smooth dimming for LED strips.

User Manual

rev B

Document PN: 50386

Safety

• Do not expose the units to rain or moisture

• Do not spill water or other liquids into or onto

the equipment.

• Do not exceed the rated 12-24 DC power supply.
Do not use home high voltage power supplies

• Never operate the equipment when it’s cover is
removed.

• This unit is intended for indoor use only, use of
this product outdoors voids all warranties.

Functional Description

1. 79354

The ALEPH1 RGB 8 BUTTONS TOUCH PANEL LED
CONTROLLER is designed to control RGB strips driving up
to 6 Amps per channel. It has 16 pre-positioned changing
patterns and 20 levels for brightness adjustments. Also
supports 3 different remote wireless controls (sold
separately) adding great flexibility.

Screw Terminals:

Colour Patterns:

1. Static Red 9. Red Fades

2. Static Green 10. Green Fades

3. Static Blue 11. Blue Fades

4. Static Yellow 12. Yellow Fades

5. Static Purple 13. Purple Fades

6. Static Cyan 14. Cyan Fades

7. Static White 15. White Fades

8. Quick Colour Glow 16. Gradual Colour Glow

Keyboard Function:

1. POWER Power ON/OFF

2. PAUSE Freeze the status. Invalid under static mode

3. MODE+ Jumps to next colour pattern

4. MODE- Jumps to previous colour pattern

5. SPEED+ Increases speed. Invalid under static mode

6. SPEED- Decreases speed. Invalid under static mode

7. BRT+ Increases brightness. Invalid under static mode

8. BRT- Decreases brightness. Invalid under static mode

Accessories (sold separately):

79360

-Colour Pulley: Sliding a finger on it will
allow a selection of 64 output colours +
function keys.

-Capable to drive several controllers at
the same time.

79361

-8 available keys to provide remote
functions to the controller.

Dimensions:

2. 79353

The ALEPH1 RGB+W+W COLOUR SQUARE TOUCH LED

CONTROLLER AMERICAN STANDARD WALL TYPE is
designed to control RGB plus two kind of white colour LED
strips (RGB+W+W) driving up to 3 Amps per each red, green
or blue channel and up to 4.5 Amps per each white channel.
It has 24 pre-positioned static and dynamic patterns and
brightness of all 64 colours in RGB full colour touch surface
ring can be adjusted.