Ensemble Designs BE-3 Datasheet

BrightEye 3
Analog to SD SDI Converter with TBC and Frame Sync
BrightEye 3 is an agile time base corrector and frame synchronizer with composite, component and Y/C inputs and SD SDI video out. Input signals are digitized to 12 bits of resolution and time base corrected by a noise tolerant tracking circuit. An external reference input allows genlock to a timing reference such as color black.
Input and reference presence are indicated through front panel LEDs. BrightEye 3 is great for capturing consumer VCRs and DVD players into non-linear editing systems.
Features
• Use with cameras, satellite receivers and VHS decks
• Analog input
• SD SDI output
• TBC and frame sync
• 12 bit processing
44
BrightEye 3
Analog to SD SDI Converter with TBC and Frame Sync
Analog Input
Number One Type Beta/SMPTE, Y, Pr, Pb NTSC, PAL Composite NTSC, PAL S-Video Impedance 75 Ω Return Loss >40 dB Input DC +/-1 volt DC Input Hum <100 mV
Serial Digital Output
Number One Type 270 Mb/s SD Serial Digital (SMPTE 259M) Delay Adjustable from < 90 µSec to 1 frame Impedance 75 Ω Return Loss >15 dB Output DC None (AC coupled)
Analog to SDI Performance
Bit Resolution 12 bit input quantization 4 x oversampling Signal to Noise >62 dB, weighted Frequency Response Composite and Y ±0.1 dB, 0 to 5.5 MHz Pr, Pb ±0.1 dB, 0 to 2.75 MHz Delay Adjustable from < 90 µSec to 1 frame
Reference Input
Number One Type 1 V P-P Composite Video, PAL or NTSC Impedance 75 Ω Return Loss >40 dB
General Specifications
Size 5.63” W x 0.8” H x 5.98” D (143 mm x 21 mm x 152 mm) including connectors and ange Weight 14 oz Power 12 volts, 5 watts (100-230 VAC modular power supply) Temperature Range 0 to 40° C ambient (all specs met) Relative Humidity 0 to 95%, non-condensing Altitude 0 to 10,000 ft.
CPst, Y In
Pr, C In
Pb
Reference In
12 bit Video
A to D
Converter
and Decoder
Bar
Generator
TBC/
Frame Sync
SD SDI Out
Proc Amp Serializer
45
Loading...