Ensemble Designs BE-11HD Specifications

BrightEye 11-HD

HD / SD SDI to Analog Converter

BrightEye 11-HD provides HD or SD digital to analog video
conversion with the full range of analog output formats
available for HD and SD. When an HD input is present HD
RGB or YPrPb are output. When an SD input is present Beta,
SMPTE, RGB or composite with simultaneous Y/C is output.

12 bit processing and conversion at 8 x oversampling mean
the best looking images possible.

Output format and gain are controlled from the front panel.
A status display indicates input presence. Video levels can
be adjusted through BrightEye Mac or PC software.

Use with HD or SD Monitors, VTRs and Projectors

SD SDI Input

Analog Composite Output

Component, S-Video Output

12 Bit

36

www.ensembledesigns.com tel [phone]

Specications

Reclocker

Deserializer

SDI Out

HD or SD SDI In

HD SDI In Yields HD Analog Out
SD SDI In Yields SD Analog Out

C, Pr, R Out

Cpst, Y, G Out

Y, Pb, B Out

12 bit

D to A

Converter

and

Video

Encoder

BrightEye 11-HD

Serial Digital Input

Number One
Type HD Serial Digital 1.485 Gb/s
SMPTE 274M, 292M or 296M
or SD Serial Digital
270 Mb/s SMPTE 259M-C
Impedance 75 Ω
Return Loss >15 dB
Max Cable Length 100 meters for HD
300 meters for SD
(Belden 1694A)
Automatic Input Cable Equalization

HD Standards Supported:
1080i (SMPTE 274M -4,5,6) 50, 59.94 or 60 Hz
720p (SMPTE 296M -1,2,3) 50, 59.94 or 60 Hz
1080p (SMPTE 274M -9,10,11) 23.98, 24, 25 Hz
1080sF (RP211 -14,15,16) 23.98, 24, 25 Hz

Analog Output

HD input yields HD analog out,
SD input yields SD analog out

Number One component or
one composite and one Y/C
Type Beta/SMPTE, Y, Pr, Pb
RGB
NTSC, PAL Composite
NTSC, PAL S-Video
Return Loss >40 dB
Output DC None (AC coupled)

Serial Digital Output

Number One
Type Follows input
Impedance 75 Ω
Return Loss >15 dB
Max Cable Length 100 meters for HD
300 meters for SD
(Belden 1694A)

SDI to Analog Performance

Bit Resolution 12 bit output reconstruction
8 x oversampling
Signal to Noise >65 dB
Frequency Response ±0.1 dB, 0 to 5.5 MHz
K Factor <1%
ScH Phase Error <±2 degrees
Dierential Phase <1 degree
Dierential Gain <1%

General Specications

Size 5.625” W x 0.8” H x 5.5” D
(143 mm x 20 mm x 140 mm)
including connectors
Power 12 volts, 7 watts
(100-230 VAC modular power
supply not included)
Temperature Range 0 to 40° C ambient
Relative Humidity 0 to 95%, non-condensing

www.ensembledesigns.com tel [phone]

37