Ensemble Designs BE-11 User Manual

BrightEye

TM

4

Specifications

4
4
4
4
4

Use with Monitors, VTRs and Projectors
SDI Input
Analog Composite Output
Component, S-Video Output
12 Bit

BrightEye 11

SDI to Analog Converter

BrightEye 11 provides digital to analog video
conversion with the full range of analog output
formats available: Beta, SMPTE, RGB, and Composite
(with simultaneous Y/C).

12 bit processing and conversion at 8x oversampling
mean the best looking images possible.

Output format and gain are controlled from the front
panel. A status display indicates input presence. Video
levels can be adjusted through BrightEye PC.

BrightEye 11 is the perfect choice to feed monitors,
VTRs, or video projectors.

Serial Digital Input

Number One
Signal Type 270Mb/s SD Serial Digital

(SMPTE 259M)
Impedance 75 Ω
Return Loss >15 dB
Max Cable Length 300 meters

Analog Output

Number One component or

one composite and one Y/C
Type Beta/SMPTE, Y, Pr, Pb

RGB

NTSC, PAL Composite

NTSC, PAL S-Video
Return Loss >40 dB
Output DC None (AC coupled)

Serial Digital Output

Type SMPTE 259M
Impedance 75 Ω
Return Loss >15 dB
Output DC <50 mV

SDI to Analog Performance

Bit Resolution 12 bit output reconstruction

8 X oversampling
Signal to Noise >65 dB
Frequency Response ±0.1 dB, 0 to 5.5 MHz
K Factor <1%
ScH Phase Error <±2 degrees
Differential Phase <1 degree
Differential Gain <1%

General Specifications

Size 5.625” W x 0.8 “ H x 5.5” D

(143 mm x 20 mm x 140 mm)

including connectors
Power 12 volts, 7 watts

(100-230 VAC modular power supply)
Temperature Range 0 to 40˚ C ambient
Relative Humidity 0 to 95˚ non-condensing

www.ensembledesigns.com tel [phone]

19

Ô