
BrightEye 10
Optical/SDI to Analog/SDI Converter
BrightEye 10 is a digital to analog video converter
with both SDI (electrical) and fiber optic inputs.
Output formats include Beta and SMPTE component,
RGB, and composite (with simultaneous Y/C). Video
processing, encoding and analog conversion is
performed digitally at 12 bits of resolution with 8
times oversampling.
Front panel controls select between the optical and
SDI input, choose the analog output format, and
adjust gain. Video levels can be adjusted through
BrightEye PC.
The reclocked SDI output follows the input selector,
thus providing optical to electrical conversion when
the optical input is selected. BrightEye 10 combines
er to SDI conversion and QC monitoring in one
fib
compact unit.
4
Specifications
4
4
4
4
4
4
4
Analog Output
Number One
Type Beta/SMPTE, Y, Pr, Pb
Return Loss >40 dB
Output DC None (AC coupled)
Optical Receiver
Use with Monitors, VTRs and Projectors
Optical or SDI Input
SDI Output
Analog Composite Output
Component, S-Video Output
12 Bit
RGB
NTSC, PAL Composite
NTSC, PAL S-Video
Serial Digital Input
Number One
Signal Type 270Mb/s SD Serial Digital
(SMPTE 259M)
Impedance 75 Ω
Return Loss >15 dB
Max Cable Length 300 meters
Optical Input
Number One
Type SD
(SMPTE 297M, optical equivalent
of 259M)
Wavelength 1310 nm
Receiver sensitivity –18 dBm
Maximum length 20km
Fiber Type Single Mode
Multi-mode compatible with
8 dB attenuation at transmit end
Connector SC
Serial Digital Output
Number One
Type 270Mb/s SD Serial Digital
(SMPTE 259M)
Impedance 75 Ω
Return Loss >15 dB
Output DC <50 mV
SDI to Analog Performance
Bit Resolution 12 bit output reconstruction
8 X oversampling
Signal to Noise >65 dB
Frequency Response ±0.1 dB, 0 to 5.5 MHz
K Factor <1%
ScH Phase Error <±2 degrees
Differential Phase <1 degree
Differential Gain <1%
General Specifications
Size 5.625” W x 0.8 “ H x 5.5” D
(143 mm x 20 mm x 140 mm)
luding connectors
Power 12 volts, 7 watts
Temperature Range 0 to 40˚ C ambient
Relative Humidity 0 to 95˚ non-condensing
inc
00-230 VAC modular power supply)
(1
Ô
18
www.ensembledesigns.com tel 530.478.1830