EnGenius Technologies DURAFON1XHC User Manual
Quick Reference Guide for yours
g
EnGenius DuraFon 1X Industrial Cordless Phone System
Your EnGenius DuraFon 1X Industrial Cordless Phone System comes with one handset pre-programmed to
the base unit. Follow the below instructions for a quick basic set-up. Full instructions are within the User’s
Manual.
Base Station Installation
1. Install base station antenna.
The base station’s antenna port has a reverse-thread connector;
to install antenna or cable, turn counter-clockwise.
2. Plug the transformer end of the base station AC/DC adaptor into a
standard AC electrical power outlet, plug the other end into the “DC
In” jack on the back of the base station.
3. Plug phone cord into the “LINE” Jack
4. A standard telephone or answering machine can be plugged into
the adjacent receptacle on the bottom of the base station marked
TEL
5. To use the Music/Message-On-Hold feature: Connect one end of a
standard audio cable into a radio or audio player, and plug the
other (3.5 mm) end into the MOH jack on back of the base.
Handset and Charger Installation
1. Plug the transformer end of the Charger AC/DC adaptor into a
standard AC electric power outlet, plug the other end into the “DC
In” jack on the back of the Charger.
2. Install battery pack onto the handset.
3. Install handset antenna.
4. Place handset onto the charger front slot.
5. The phone system is now ready to perform basic functions such as
making and receiving phone calls and intercom calls. No base
station or handset programming is needed for basic operations.
New Handset Registration
With new (Handset ID “00”) handset, press Menu (right) soft key
00
Please
Register
REDIAL MENU
Press 6 to register
00
Registration
1.Register
ister
2,Dere
Press and hold the “Reg”
button on base unit for 3
seconds
Base installation setup illustration picture;
Base installation setup illustration picture
Press 1 to
complete the
process
12
Welcome!
REDIAL MENU
2-digit handset ID appeared!
Literature Order Number: 125-0012-01 Instruction Getting Started; P/N: 670901573030
Common Keys
y
r
m
TALK/ FLASH
This key is used to initiate an outgoing or answer an incoming call. This
key also functions as the FLASH key in order to access call waiting (if
subscribed to with your local telecom service provider) or some PBX
features.
2-WAY/ INTERCOM
This key is used to initiate a private 2-WAY radio communication to
another handset. This key can also be used to 2-WAY a base unit that the
handset is registered. During the TEXT MESSAGE mode, this key can be
used to send out the text message.
BROADCAST
This key is used to initiate a half-duplex public announcement to all
handsets, a group of handsets, or an individual handset.
END/OFF
This key is used t turn the handset ON or OFF by pressing and holding the
key for 3 seconds. This key also ends a telephone or 2-WAY
communication.
SOFT (Left/ Right)
There are two “SOFT” keys on the handset keypad. These keys are
located just under the LCD and to either side of the up and down scrolling
keys. The function of these keys will be indicated on the LCD screen and
will change depending on the mode of the handset. The “SOFT” keys will
be referred to as the LEFT and RIGHT soft keys.
Main Menu Function
UP and DOWN Scrolling
The scrolling keys are used to scroll records or menu options. The Phone
Directory can be accessed directly from the idle mode’s main screen by
pressing one of the scrolling keys. Besides, this key can be used to adjust
the voice volume during the conversation.
Main menu Sub-menu
1.KeyGuard
2.PhoneBook
3.Call Logs
4.Sound
5.Settings
6.Registration
7.Text Message
8.Call Manage
1.Dialed
2.Received
3.Missed
1.Ring Volume
2.Ring Tone
3.Key Volume
Tone
4.Ke
0.PBX Option
1.Dial Prefix
2.Group Select
3.Language
4.Clear
5.Custom Name
6.Contrast
7.Backlight
8.Call Barring
9.Name Tag
9.Syste
1.Tone
2.Flash
3.Xfter PBX
Literature Order Number: 125-0012-01 Instruction Getting Started; P/N: 670901573030
Loading...