EnGenius ENS202EXT User Manual

Page 1

Expand your business network beyond the walls of your building so employees and guests can access it and your Internet connection when they’re outside.

ENS202EXT

Datasheet

Long-range 2.4 GHz Wireless N300 Outdoor Access Point

Includes PoE injector kit for versatile installation

The EnGenius ENS202EXT is a high-powered, long-range 2.4 GHz Wireless N300 Outdoor Access Point delivering data rates up to 300Mbps and is ideal for providing connectivity to a small business network and its Internet connection for restaurant patrons, or for students and employees in educational or corporate campus venues.

ENS202EXT is compliant with the IEEE802.11b/g/n standards delivering a wireless data rate of up to 300Mbps on the 2.4 GHz frequency spectrum. It features two omni-directional 5 dBi MIMO (Multiple In/Multiple Out) antennas that coupled with its strong transmit power of up to 400mW make it a compelling performance solution for small and growing businesses at a very affordable price.

ENS202EXT also features a robust security feature set that includes support for WPA/WPA2 Personal and Enterprise encryption, 802.1x RADIUS

authentication, hidden SSID and MAC address ltering.

ENS202EXT has an IP65 rated weatherproof housing that ensures continued operation in harsh outdoor environments or in climates of extreme cold, heat or continuous moisture.

Key Features

400mW high transmit power enabling long

range connectivity

Designed for outdoor deployment with IP65

waterproof housing

Supports IEEE802.11b/g/n wireless standards

with up to 300 Mbps data rate

Two detachable 5 dBi omni-directional MIMO

antennas

Signal strength LED indicators, pole mount

kit, PoE kit provide easy installation

Can be monitored after deployment with

EnGenius EZ Controller™ software for

Windows

www.engeniustech.com

Page 2

Technical Specications

Hardware

RF: 2.4 GHz Frequency Band Memory: 64MB Flash: 16MB

Antenna

External/detachable 5 dBi Omni-directional Antennas

Physical Interface

2 x RJ-45 Fast Ethernet (10/100 Mbps) 1 x Reset Button

Power Requirements

- Active Ethernet (Power-over-Ethernet)

- Proprietary PoE design

- Power Adapter (United States) 24V / 0.6A

RF Specication

Frequency Band

2.4 GHz IEEE 802.11b/g/n

Data rate

Up to 300 Mbps

Software

Operation Modes

Access Point / Client Bridge / Client Router / WDS

ENVIRONMENT & MECHANICAL

Temperature Range

Operating -20°C~70°C / -4°F~158°F Storage -30°C to 80°C / -22°F to 176°F Humidity (non-condensing) 0% ~ 90% typical

Weights & Measures ENS202EXT Device

Weight: 0.7 Ibs. Width: 3.9” Length: 7.3” Height: 1.14”

Packaging

Weight: 1.6 Ibs. Width: 2.8” Length: 12.2” Height: 9.2”

Package Contents

• ENS202EXT Access Point

• Power Adapter

• PoE Injector (EPE1212)

• Pole Mount set

• Screw Set

• Quick Start Guide

• Technical Support Card

Wireless/Network

Auto Channel Selection Distance Control (802.1x Ack timeout) CLI (Command Line Interface) Supported

802.1x RADIUS Supplicant (CB Mode) Multiple SSID (4 SSID), BSSID WDS AP / WDS Bridge / WDS Station Multicast Supported VLAN Tagging / VLAN Pass-through Auto Reboot Wi-Fi Scheduling

Security

WPA/WPA2 Personal (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise (WPA-EAP using TKIP) Hide SSID in beacons

MAC address ltering, up to 50 eld

Wireless STA (Client) connected list

QoS (Quality of Service)

WMM (Wireless Multimedia)

Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating

environment, and mix of devices in the network. Features and specications subject to change without notice.