Features
The edge 802.11ac built-in high performance
Mesh Router with Mesh technology for highdensity use on mulple applicaons.
EnGenius AC1200 Mesh Router EMR3000 is a new concept of
Dual Band Dual Concurrent Wireless Mesh router. It can be
easily deployed and maintained with simple conguraon
deployment and recovery capacity. It does not need
complicated sengs. Just plug your rst EMR3000 into your
cable or DSL modem, simply establish Mesh network from
your mobile phone APP via few steps. Addional EMR3000
just need power on from the wall outlet and it will auto
connect to exisng EMR3000 Mesh network, that’s all. Enjoy
your whole home Wi-Fi network coverage in a minute!!
> IEEE802.11a/b/g/n/ac, Dual-Band & Dual
Concurrent
> Support up to 867 Mbps in 5GHz frequency
band and 300 Mbps in 2.4GHz frequency
band.
> Mesh Easy deploy system with mobile app
simple conguraon
> Built-in 360° high performance antenna for
whole home Wireless Coverage
> Guest Network provides Internet connecon
for guests but restricts access to your
local network.
> Parental Control to schedule mes when
access to the Internet is permied and
restrict access to websites
> Auto rmware update keep your device’s
rmware up to date so you can benet from
the very latest service and security
Enhancements
> It’s simple to set up. Easy to manage
1
Whole home Wi-Fi coverage with consistent performance
What is the best choice if a single router WiFi signal cannot cover your enre
home? EMR3000 is an ideal soluon for your home network environment. It
can extend signal range from an internal high performance Wi-Fi module, the
high-gain antenna arrays reduce the numbers of mesh node deployment
typicality requirement. No more Wi-Fi dead spots in your home with EnGenius
AC technology with High Performance Wi-Fi
EMR3000 is a Dual Band Dual Concurrent Wireless Mesh router with the latest
11AC technology. The total wireless speed is up to 1.2Gbps. It is two mes
faster than 802.11n technology. The upgraded throughput will bring you the
smoothly wireless with lag free and exible.
No worry about Wi-Fi problems
If there is a Wi-Fi problem, ever one of the EMR3000 fails by the power outage; other EMR3000 will nd an alternave
present and xes the Wi-Fi connecon by itself. EMR3000 Wireless Mesh system allows for mulple nodes with minimal
signal loss and can connect up to 8 nodes of EMR3000 Mesh Router system. it’s an ideal home Wi-Fi soluon with users can
simply have whole home Wi-Fi internet access.
Easy set-up, use, plug and play Mesh Network
With EnMesh APP, it fully set up, deploy, and use by mobile device without complicang installaon procedure. EnMesh
provides a easiest way to construct Mesh Network is using EnMesh APP to smart connect all Mesh devices instantly when
they were powered up. Therefore, it also provides Internet speed and easy conguraon to do Mesh Network
troubleshoong.
2
Physical Interface
● LED indicator
● Wall mount
hole
Interface
● 1 x USB port
● 1 x DC Jack
● 1 x WAN port
● 1 x LAN port
● Reset Button
3
Technical Specicaons
EMR3000 Mesh Router
Physical Interface
2x 10/100/1000Mbps Ethernet Port (1 WAN/1 LAN)
1x USB 2.0 Port
1x Reset Button
1x DC Jack
LED indicator
1 LED indicator with 4 different colors and types
White - Mesh and Internet connection status
Blue - Bluetooth connection status
Red - No Internet connection or no Mesh connection
Orange - Mesh connection signal is weak
Package Content
1x EMR3000
1x Power Adapter
1x Quick Start Guide
Wireless Specification
IEEE802.11ac/a/b/g/n
Wireless Band: 2.4GHz / 5GHz
Dual Band Internal High Performance antenna
2.4GHz Tx Output Power: 20±1 dBm (MAX.)
2.4GHz Rx Sensibility: -85dBm (MAX.)
5GHz Tx Output Power: 19±1dBm (MAX.)
5GHz Rx Sensibility: -83dBm (MAX.)
(The MAX. Power may be different depending on local regulations)
Software Features
All setup on EnMesh mobile APP
Mesh easy connection/ setup via bluetooth
Mesh connection status overview
Parental Control
1x RJ-45 Ethernet Cable
3-Pack bundle kit
- 3x EMR3000
- 3x Power Adapter
- 1x Quick Start Guide
- 1x RJ-45 Ethernet Cable
Hardware Specification
Dimension: 127 x 47.2mm (Diameter x Height)
Power Adapter: 12V / 1.5A
Certification
CE/FCC/NCC/BSMI
Physical/Environment Condition
Operation Temp.: 0˚C ~ 40˚C
Humidity 90% or less (Non-Condensing)
Storage Temp.: -20˚C ~ 60˚C
Humidity 95% or less (Non-condensing)
Guest Network
Encryption: WEP / WPA / WPA2 / TKIP /AES
WAN: PPPoE / Static IP / DHCP
Band steering
DHCP Server
URL / IP / Port / ICMP Filtering
UID / DDNS / EnGenius DDNS Service
UPnP Support
Remote Control
Firmware Upgrade
Airprint server
Emergency Recovery Page (System failure)
Backup / Restore Setting
EnMesh & EnFile Mobile App. (iOS/Android) Supported
4
Loading...