Wireless Indoor Acc ess Point
EAP1250
Connecting the Access Point
1
IP Address Configuration
2
Once your computer is on, ensure that your TCP/IP is set to On or Enabled.
Open Network Connections and then click Local Area Connection. Select
Internet Protocol Version 4 (TCP/IPv4).
EAP1250
Wireless Indoor Access Point
If your PC is already on network, ensure that you have set it to a static IP
Address on the interface. (Example: 192.168.1.10and the Subnet Mask
address as 255.255.255.0.
Access Point (EAP1250)
Ceiling Mount Base
(9/16” T-Rail)
Quick Installation Guide
Ceiling Mount Base
(15/16” T-Rail)
Power Adapter
Mounting the Access Point
Ceiling Mounting the Access Point :
Slide the ceiling mount base into the slot of the Access Point.
A)
Hold the Access Point with one hand to reach the other hand over the T-Rail
B)
sides of the bracket. Then hook the stationary end of the ceiling mount
bracket onto the T-Rail.
A
B
T-Rail
* An optional power adapter is available.
Africa / CIS / Middle East
Toll Free: 888 397 2788
Local: (+1) 905 940 8181
Toll Free: 885 735 7888
Local: (+1) 714 432 8668
Local: (+31) 40 8200 887
Toll Free: 0800 364 364 87
Local: (+971)4 357 5599
Asia / Oceania
Taiwan
www.engeniustech.com.tw
Local: (+65) 6227 1088
twsupport@engeniusnetworks.com
Toll Free: 0800 003 885
Local:(+886) 2 2652 1808
Loading...