Energy Sistem Pro 4 Instruction Manual

Introduction
Thank you for your trust in our company and for buying the new Energy Tablet 10" Pro 4. We hope you enjoy
it.
Your tablet features a 10" IPS screen (1920 x 1200 pixels), two speakers of 1 W each, a 1.5 GHz Quad Core
a 6200 mAh battery, GPS and FM radio.
We strongly recommend to read this manual in order to familiarize yourself with your tablet before you start
using it. By doing so, you will be able to make the most of it.
Care and maintenance
https://www.energysistem.com/en/guide/44483
1 sur 29 29/06/2018 à 12:10
Do not expose your tablet to impacts, dust, direct sunlight, humidity or high temperatures.
Do not use neither corrosive nor abrasive cleaning products.
Keep the device clean and free of dust using a soft and dry cloth.
Do not leave your tablet completely discharged for a long time. Always use the charger provided with the
product or any other with the same features.
Please do not dismantle the device. All reparation works should be carried out exclusively by qualified staff
of Energy Sistem Technology, S.A.
Main features
SCREEN
10.1" IPS LED backlit screen
Widescreen: 16:10
FHD resolution (1920 x 1200 pixels)
Anti-fingerprint coating
PROCESSOR
Quad Core ARM Cortex A53 1.5 GHz processor
Mali-T720 GPU
OPERATING SYSTEM
Android 7.0 Nougat
MEMORY
2 GB RAM
32 GB internal memory expandable by a further 256 GB via microSD-HC/XC cards
OTHER FEATURES
5 MP rear camera
2 MP front camera
2 x 1 W built-in speaker
Omnidirectional microphone
Motion sensor (accelerometer)
BATTERY
Battery capacity: 3.8 V / 6200 mAh, Li-Ion battery
Power supply using an AC/DC power adapter (Input: AC 100-240 V 50-60 Hz. Output: DC 5 V/2.0 A)
WI-FI
Standard: 802.11 a/b/g/n
Operating frequency: 2.4 GHz (2.412-2.472 GHz) / 5 GHz (5.180-5.320 GHz)
Maximum output power: 12.30 dBm
https://www.energysistem.com/en/guide/44483
2 sur 29 29/06/2018 à 12:10
BLUETOOTH
Bluetooth 4.0 class 2
Operating frequency: 2.4 GHz (2.402-2.480 GHz)
Maximum output power: 4.88 dBm
CONNECTIONS
Micro HDMI
USB-Host function
USB-OTG function
Product content
Energy Tablet 10" Pro 4
USB cable to charge the battery and transfer data
MicroUSB cable to connect external USB devices
AC/DC power adapter (EU plug): 100-240 V AC 50-60 Hz / 5 V 2 A
General overview
https://www.energysistem.com/en/guide/44483
3 sur 29 29/06/2018 à 12:10
MicroHDMI connection
1.
MicroUSB port
2.
Headphones output
3.
MicroSD card slot
4.
Rear camera
5.
Front camera
6.
Microphone
7.
Power button
8.
Volume +
9.
Volume -
10.
Speakers
11.
Charging the device
Your tablet has a rechargeable 6200 mAh battery. The charging time ranges from 4 to 5 hours, depending on
whether the device is on or off. We strongly recommend to use the cable and the power adapter that come with
the product to comply with battery charging times.
https://www.energysistem.com/en/guide/44483
4 sur 29 29/06/2018 à 12:10
Switching the device on and off
Press and hold the power button (6) for a few seconds to turn on your tablet. Once the operating system has
loaded completely, please unlock the device by sliding up your finger on the lock screen. Please follow the setup
wizard to adjust basic settings when you switch on the device for the first time. This process may take a few
minutes.
To turn off the device, press and hold the same button until the power off menu appears on screen and then
select the Switch off option.
Briefly press the power button (6) to lock/unlock the tablet thus, turning the screen off/on.
Main gestures
Tap: Touch the screen briefly
Double tap: Touch the screen twice quickly
Drag: Move your finger over the screen while maintaining continuous contact
Slide: Slide your finger quickly over the screen
Press: Touch the screen for an extended period of time
https://www.energysistem.com/en/guide/44483
5 sur 29 29/06/2018 à 12:10
Zoom: Pinch the screen with two fingers to zoom in or out
Main screen
https://www.energysistem.com/en/guide/44483
6 sur 29 29/06/2018 à 12:10
https://www.energysistem.com/en/guide/44483
7 sur 29 29/06/2018 à 12:10
Search: direct access to Google's search engine.
1.
Status bar: displays information about the signal status, battery and clock. If you slide down your finger
over this area, you will access the notifications menu. The quick settings panel will be displayed if you
slide down your finger once again. You can also access this panel by sliding down two fingers over the
status bar on the main screen.
2.
Desktop: you can customize background as well as app, folder and widget shortcuts.
3.
Menu: Access to the app menu.
4.
Multitask: shows the recently used applications.
5.
Home: brings you back to the main screen.
6.
Back: allows you to go back to the previous screen shown by any application that is running.
7.
Widgets
In order to add a widget to one of your desktops, tap and hold the centre of the desktop and then, select
WIDGETS
.
https://www.energysistem.com/en/guide/44483
8 sur 29 29/06/2018 à 12:10
keeping it pressed and then releasing it on the selected area.
https://www.energysistem.com/en/guide/44483
9 sur 29 29/06/2018 à 12:10
Loading...
+ 20 hidden pages