Eneo VKC-13140F2810IR User Manual

User Manual

1/3” Day/Night Camera

with IR Illumination

VKC-13140F2810IR

EN

ULTRA CLEAR RESOLUTION CAMERA

Safety Precaution

To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.

CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.

The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.

Warning :

This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.

Caution :

Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.

03

ULTRA CLEAR RESOLUTION CAMERA

Safety Precaution

NOTICE

The image used in this instruction manual are processed to help comprehension
and may differ from actual appearance of the camera.

Avoid installing areas where has shock or vibration which results in the problems.

Pay attention to safety when laying the connection cable and observe that the cable
is not subjected to heavy loads, kinks or damage and no moisture can get in.

Never open the device such as boards or lens.
The warranty becomes void if repairs are undertaken by unauthorized persons.

Maintenance and repair have to be carried out only by authorized service centers.

Use only a mild detergent to clean the housing.

The camera should never be operated beyond the technical specifications.
This can lead to destruction.

The camera should never be operated in water.

04

ULTRA CLEAR RESOLUTION CAMERA

Contents

p.03~04

p.05

p.06

p.07

p.08

Safety Precaution

Contents

Features

Composition

Dimensions

p.09

Part Names

p.10~12

Installation Instructions

p.13~32

Operating Instructions

p.33~34

Specifications

05

ULTRA CLEAR RESOLUTION CAMERA

Features

Key Features

• 1/3” High density Sony CCD (960H)

• 750TVL High-Resolution

• True WDR (Wide Dynamic Range) : V-Series

• D-WDR by ATR-EX : A-Series

• TDN with Dual Filter Switcher

• Built-in f=2.8~10mm F1.4 Mega pixel DC Auto Iris Vari-focal Lens
> Option: f=6~50mm F1.4 DC Auto Iris vari-focal lens

• Improved noise reduction 2D+3DNR

• Improved IR-Optimizer

• DIS(Digital Image Stabilizer), LSC (Lens shading compensation)

• Scene Preset, Motion detection, Polygon privacy mask(polygon mask up to 15)
E-Zoom, Defog, Sens-up, BLC/HLC, Flickerless, Anti-CR, Flip

• External Zoom & Focus adjustment

• IR-LED 40pcs

• LED ON/OFF Control

• Up the Coaxial (UTC) communication

• RS-485 control (Option)

• OSD MENU & Video Sub-out port for easy installation & maintenance

• Circuit protection against faulty connection in power polarity

• Isolated power supply against ground loop problem

• IP67 Protection

General Description

This is an ultra-clear resolution camera which realizes over 750TVL resolution and
a crisp color reproduction with SONY 960H CCD and Effio-V(Effio-A) Enhanced
image signal processor.

• With Effio-V/A series Enhanced digital imaging system,

- Delivers the crystal clear images providing 750TVL resolution in conjunction
with SONY 960H High density CCD.

- V-Series are provided ‘TRUE WDR’ function

- A-Series are provided ‘D-WDR by ATR-EX’ function

- Color signal processing provides the optimum balance between the luminance
and chroma signals for high color reproducibility even for the detail scene which
contains very high spatial frequency.

- Incorporates 2D+3DNR signal processing.

• With ICR mechanism,

- Enhances its sensitivity about 10x at night time

- Can accepts the infrared light

06

ULTRA CLEAR RESOLUTION CAMERA

Composition

Plastic Anchor:

6 x 30mm (4pcs)

Mounting Screw:
4 x 30mm (4pcs)

Assembly Screw:

4 x 14mm (4pcs)

Torque Wrench:

3mm (1pc)

Operating InstructionCamera

Mounting Template

Easy
Bracket

Video Sub-out
Cable (1pc)

07

ULTRA CLEAR RESOLUTION CAMERA

Dimensions

(unit : mm)

100

86.40

75.90

80

87.30
108

190

267

08

ULTRA CLEAR RESOLUTION CAMERA

Part Names

SUNSHIELD BOLT

SUNSHIELD

DUAL WINDOW

POWER CABLE

OSD Setup

CONTROL COVER

FRONT CASE

REAR CASE

FOCUS ZOOM

EASY
BRACKET

BRACKET

REAR

VIEW

09

ULTRA CLEAR RESOLUTION CAMERA

Installation Instructions

1. Locate the mounting template at the installation position and drill the ceiling or wall if
needed. ( *The easy bracket can not be installed on the ceiling)

2. Place the easy bracket on pre-drilled position and fix it through using mounting screws
(4x30mm). Skip this step when an easy bracket is not installed.

3. Route the Power cable to the connecting place.
Hook up the camera bracket with the easy bracket as illustrated below.

4. Fix the camera bracket through using assembly screws (4x14mm).

5. Set the camera’s viewing angle and adjust zoom/focus of lens by using the torque wrench.

6. Put the sunshield to the camera unit and tighten the sunshield-bolts.

Assembly Screw

Torque Wrench

: 4x14mm

Mounting Screw

: 4x30mm

2

4

1

3

REAR VIEW

CAUTION

• Extreme care should be taken NOT to scratch the window in front of lens.

• Care should be taken the cable is NOT to be damaged, kinked or exposed in the
hazardous area.

• Do not expose the camera directly to a strong light source such as the sun or spot
light.

Cable exit

10

ULTRA CLEAR RESOLUTION CAMERA

Installation Instructions

Pan & Tilt adjustments

• Unlock the screw on the camera bracket through using the torque wrench supplied

• Set the camera’s viewing angle then lock the screw on the bracket.

1) Pan limit:
Pan is limited to +/- 90°.

2) Tilt limit:

Tilt is limited to 0°(2°) min ~ 90° max.
for wall(ceiling) installation respectively with
reference to the wall(ceiling) when the
inclination of camera module is 0°, that is,
the image is aligned horizontally.

90° 90°

• on the wall • on the ceiling

3) Inclination limit

(Horizontal image alignment):
Inclination limited to +/-90° max.

±90°

Zoom & Focus adjustments

Use the torque wrench supplied.

• Turn the Focus gear to “N”(Near) or “∞”(Far)
until the sharpest focus is made.

• To widen the viewing angle, turn the Zoom to
“W”(Wide) and to obtain a closer view, turn it
to “T”(Tele)

11

88°90°