Eneo VK-1322, VK-1322/SMD Instruction Manual

1
Instruction Manual
B&W Smoke-Detector Hidden Camera VK-1322/SMD
2
3
Contents
1. Safety Instructions
• Read these safety instructions and the operation manual rst before you install and commission the camera.
• Keep the manual in a safe place for later reference.
• Contact your local dealer in case of malfunction.
• Protect your camera from contamination with water and humidity to prevent it from permanent damage. Never switch the camera on when it gets wet. Have it checked at an authorized service center in this case.
• To disconnect the power cord of the cameras, pull it out by the plug. Never pull the cord itself.
• Do not open the camera housing. Maintenance and repair have to be carried out only by authorized service centers.
• Operate the camera only at a temperature range of -10°C to +50°C and at a humidity of max. 90%.
• The camera is equipped with an automatic gain control (AGC) which increases the sensitivity at low light levels. Noisy pictures at these conditions are quite normal.
• Pictures including bright spotlights will cause perhaps vertical lines (smear) or soft edges (blooming) on the monitor display. This happens most probably in automatic shutter mode (AES). This is not a defect but an effect caused by the CCD sensor.
3
• Use only a mild detergent to clean the housing. Never use dilution or gasoline for this can cause permanent damage to the surface.
The cameras should never:
• be operated beyond the technical specications. This can lead to destruction.
• pointed with open iris towards the sun. (This can damage the sensor).
Note: This is a class A digital device. This digital device can cause harmful interference in a residential area; in this case the user may be required to take appropriate corrective action at his/her own expense.
2. Description
This B/W (Colour) Smoke-Detector Hidden Camera uses a high sensitive 1/3” interline transfer CCD Image Sensor (CCD = Charge Coupled Device), and all state circuitry which provides extremely long life and high reliability.
This Camera offers excellent image quality and functions with low lag and high burn resistance, and is not subject to distortions from magnetic elds.
Highly resistant to shock and vibration and easy to install, this Camera is an excellent choice for your B/W CCTV system.
Loading...
+ 5 hidden pages