Eneo PNR-5304-4TB User Manual
Full Manual
Network Video Recorder
EN
PNR-5316
PNR-5308
PNR-5304
Before reading this manual
This operation manual contains basic instructions on installing and using Network Video Recorder.
Users who are using this product for the rst time, as well as users with experience using comparable products, must
read this operation manual carefully before use and heed to the warnings and precautions contained herein while
using the product. Safety warnings and precautions contained in this operation manual are intended to promote
proper use of the product and thereby prevent accidents and property damage and must be followed at all times.
Once you have read this operation manual, keep it at an easily accessible location for future reference.
• The manufacturer will not be held responsible for any product damage resulting from the use of unauthorized parts and
accessories or from the user's failure to comply with the instructions contained in this operation manual.
• It is recommended that rst-time users of Network Video Recorder and individuals who are not familiar with its use seek
technical assistance from their retailer regarding product installation and use.
• If you need to disassemble the product for functionality expansion or repair purposes, you must contact your retailer and
seek professional assistance.
• Both retailers and users should be aware that this product has been certied as being electromagnetically compatible for
commercial use. If you have sold or purchased this product unintentionally, please replace with a consumer version.
Safety Precautions
The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of sucient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
2
Important Safeguards
Before reading this manual
1. Read Instructions
All the safety and operating instructions should be read before the appliance
is operated.
2. Retain Instructions
The safety and operating instructions should be retained for future reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do not use
liquid aerosol cleaners. Use a damp soft cloth for cleaning.
4. Attachments
Never add any attachments and/or equipment without the approval of the
manufacturer as such additions may result in the risk of re, electric shock or
other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Ventilation
Place this equipment only in an upright position. This equipment has an
open-frame Switching Mode Power Supply (SMPS), which can cause a re or
electric shock if anything is inserted through the ventilation holes on the side
of the equipment.
7. Accessories
Do not place this equipment on an unstable cart, stand or table. The
equipment may fall, causing serious injury to a child or adult, and serious
damage to the equipment. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit approved by the
manufacturer.
This equipment and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the equipment and cart
combination to overturn.
8. Power Sources
This equipment should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power, please
consult your equipment dealer or local power company.
You may want to install a UPS (Uninterruptible Power Supply) system for
safe operation in order to prevent damage caused by an unexpected power
stoppage. Any questions concerning UPS, consult your UPS retailer.
9. Power Cords
Operator or installer must remove power and TNT connections before
handling the equipment.
10. Lightning
For added protection for this equipment during a lightning storm, or when it
is left unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent damage
to the equipment due to lightning and power-line surges.
11. Overloading
Do not overload wall outlets and extension cords as this can result in the risk
of re or electric shock.
12. Objects and Liquids
Never push objects of any kind through openings of this equipment as they
may touch dangerous voltage points or short out parts that could result in a
re or electric shock. Never spill liquid of any kind on the equipment.
13. Servicing
Do not attempt to service this equipment yourself. Refer all servicing to
qualied service personnel.
14. Damage requiring Service
Unplug this equipment from the wall outlet and refer servicing to qualied
service personnel under the following conditions:
A. When the power-supply cord or the plug has been damaged.
B. If liquid is spilled, or objects have fallen into the equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by following the operating
instructions, adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualied technician to
restore the equipment to its normal operation.
E. If the equipment has been dropped, or the cabinet damaged.
F. When the equipment exhibits a distinct change in performance ─ this
indicates a need for service.
15. Replacement Parts
When replacement parts are required, be sure the service technician has
used replacement parts specied by the manufacturer or that have the same
characteristics as the original part. Unauthorized substitutions may result in
re, electric shock or other hazards.
16. Safety Check
Upon completion of any service or repairs to this equipment, ask the service
technician to perform safety checks to determine that the equipment is in
proper operating condition.
17. Field Installation
This installation should be made by a qualied service person and should
conform to all local codes.
18. Correct Batteries
Warning: Risk of explosion if battery is replaced by an incorrect type. Dispose
of used batteries according to the instructions.
19. Tmra
A manufacturer’s maximum recommended ambient temperature (Tmra)
for the equipment must be specied so that the customer and installer may
determine a suitable maximum operating environment for the equipment.
20. Elevated Operating Ambient Temperature
If installed in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may be greater than room ambient.
Therefore, consideration should be given to installing the equipment in an
environment compatible with the manufacturer’s maximum rated ambient
temperature (Tmra).
21. Reduced Air Flow
Installation of the equipment in the rack should be such that the amount of
airow required for safe operation of the equipment is not compromised.
22. Mechanical Loading
Mounting of the equipment in the rack should be such that a hazardous
condition is not caused by uneven mechanical loading.
23. Circuit Overloading
Consideration should be given to connection of the equipment to supply
circuit and the eect that overloading of circuits might have on over current
protection and supply wiring. Appropriate consideration of equipment
nameplate ratings should be used when addressing this concern.
24. Reliable Earthing (Grounding)
Reliable grounding of rack mounted equipment should be maintained.
Particular attention should be given to supply connections other than direct
connections to the branch circuit (e.g., use of power strips).
3
Before reading this manual
In-Text
Symbol Type Description
Caution Important information concerning a specic function.
Note Useful information concerning a specic function.
User’s Caution Statement
Caution: Any changes or modications to the equipment not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
FCC Compliance Statement
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART
15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE
WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE
RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE
HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO
CAUSE HARMFUL INTERFERENCE, IN WHICH CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE.
WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID
THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE CAUSING EQUIPMENT
REGULATIONS.
WEEE (Waste Electrical & Electronic Equipment)
Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household
wastes at the end of its working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
oce, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal.
4
Before reading this manual
The information in this manual is believed to be accurate as of the date of publication even though explanation about some
functions may not be incorporated. We are not responsible for any problems resulting from the use thereof. The information
contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to incorporate
such changes.
The software included in this product contains some Open Sources. You may obtain the complete corresponding source code
from us. See the Open Source Guide on the software CD (OpenSourceGuide\OpenSourceGuide.pdf) or as a printed document
included along with the User's Manual.
5
Table of Contents
Part 1 – Introduction ......................................... 9
Product Features ................................................................9
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Overview ......................................................................11
Front Panel ...............................................................................11
1
Rear Panel ...............................................................................14
Rear Panel Connections ..................................................................14
Remote Control ..........................................................................18
Part 2 - Getting Started .....................................21
2
Setup Wizard ...................................................................21
Camera Registration ............................................................24
Device Scan ..............................................................................24
Advanced Setup: Video In IP Setup ........................................................25
Camera Registration Mode ......................................................26
Login ..........................................................................26
Live Mode ......................................................................27
Live Menu ...............................................................................27
Zoom ..........................................................................30
PTZ Control ..............................................................................31
Event Monitoring ........................................................................32
Covert Camera ...........................................................................32
Context Menu Access ....................................................................33
Edit Group ...............................................................................33
Video Recording ................................................................33
Panic Recording ..........................................................................33
Audio Recording ...............................................................34
Video Recording Playback ......................................................34
All Channel Playback .....................................................................34
Remote Control Buttons during Playback .................................................34
Context Menu ............................................................................34
6
Table of Contents
Part 3 - Conguration .......................................35
3
Menu Use ......................................................................35
Text Input via Virtual Keyboard ...........................................................35
Batch Assignment ........................................................................35
Mouse ...................................................................................36
System Setup ..................................................................36
General ..................................................................................36
Date/Time ...............................................................................37
User .....................................................................................38
Storage ..................................................................................40
Monitoring ...............................................................................40
Record Setup ...................................................................42
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Schedule .................................................................................43
Pre-Event ................................................................................44
Event Setup (PLS-53xx) .........................................................45
Video-Analytics .........................................................................45
Alarm-In .................................................................................48
Video Loss ...............................................................................49
Audio Detection (PLS-53xx) ...............................................................49
Text insertion (POS systems) ..............................................................50
Network Setup .................................................................51
General ..................................................................................51
WAN .....................................................................................51
FEN ......................................................................................52
Device Setup ...................................................................53
Alarm-Out ...............................................................................53
Display Setup ..................................................................54
OSD .....................................................................................54
Main Monitor ............................................................................54
Notication Setup ..............................................................55
Schedule .................................................................................55
Callback .................................................................................55
Mail ......................................................................................55
SNS ......................................................................................56
Camera Setup ..................................................................57
General ..................................................................................57
7
Table of Contents
Advanced Setup (PLS-53xx) ...............................................................57
Stream ...................................................................................62
Audio (PLS-53xx) .........................................................................63
Upgrade (PLS-53xx) ......................................................................63
4
5
6
Part 4 - Search ..............................................64
Time-Lapse Search .............................................................64
Search Menu .............................................................................65
Time-Lapse Search Menu ................................................................66
Context Menu ............................................................................69
Print .....................................................................................69
Event Log Search ...............................................................70
Overlapped Recording Search ..................................................71
Part 5 - WebGuard ..........................................72
Web Monitoring Mode .........................................................73
Web Search Mode ..............................................................75
Part 6 - Appendix ...........................................77
System Log Types ..............................................................77
Error Code Types ...............................................................78
Notes on rst-time operation of ONVIF IP cameras
(PX, PT, NX series) ...............................................................80
Recommended Network Setups ................................................81
Cameras on the PNR, no WAN .............................................................81
Cameras on the PNR with WAN ...........................................................82
Cameras in the local network .............................................................82
Cameras on the local network and on the PNR ............................................83
Troubleshooting ...............................................................84
Specications ..................................................................85
Index ..........................................................................87
8
1
Part 1 – Introduction
Product Features
This is a video recorder that supports surveillance, recording, and playback of video from pos (or video encoders).
This NVR (Network Video Recorder) unit oers the following features:
• Real-time 4/8/16-channel network surveillance
• Supports Network Cameras with Zeroconf
• Supports up to Full HD 480ips video recording (4-ch model: 120ips video recording)
• HDMI out (1) and VGA out (1) ports
• Fast and easy search feature (Time-Lapse, Event log, Motion, Text-In)
• Simultaneously survey, record, play back, and transmit data in real-time
• Graphic User Interface(GUI) and multilingual
• Multiple recording modes (Schedule, Event, Pre-Event, and Panic)
• PoE-enabled Camera Connection
• 1 x USB 2.0, 1 x USB 3.0 ports (for connecting peripherals, upgrading software, and saving recording data)
• 2 internal SATA2 HDD bays and 1 eSATA port
• Two-way audio communication (not currently supported)
• Network camera audio recording and 1-channel audio playback
• 4 alarm ins and 1 alarm out
• IR remote control-enabled
• Self-diagnosis and automated system event alerts (industry standard S.M.A.R.T. protocol for HDD status alerts)
Network
Camera
Analog
Camera
Gigabit PoE Switch
Network
Camera
Video Encoder
Sensor (1-4)
Audio Out
IR Remote
Control
HDMI Monitor
Network Video Recorder
Mouse
VGA Monitor
Alarm Out
Network Connection
Flash Memory
USB HDD
Alarm
9
Part 1 – Introduction
Accessories
Upon unpackaging the product, check the contents inside to ensure that all the following accessories are included.
Network Video Recorder Power Cable / DC Adapter(12V, 48V) Quick Guide
Operation Manual and Remote
Program CD
Assembly Screws for Adding Hard
Disk Drives
10
Optical USB Mouse IR Remote Control
SATA2 cables
Overview
1
1
4
1
5
1
617
1
8
9
2
1
3
0
Front Panel
Part 1 – Introduction
USB Ports
1
Alarm Button
5
Menu Button
9
• Some buttons have more than one function.
• Remote control sensor is located on the right side of the arrow buttons. Ensure that the sensor remains unobstructed at all
times. If obstructed, the sensor might not be able to receive remote control signals.
• Placing a Wi-Fi, Bluetooth, or any other wireless communication device near the NVR may interfere with remote control
signal transmission.
• Access various windows and menus using a USB mouse as you would on a personal computer.
• For easier system conguration, a USB mouse is recommended.
Camera Buttons
2
Search Mode Button
6
Arrow and Playback
0
Control Buttons
LEDs
3
Display Button
7
Panic Recording Button
4
PTZ Button
8
11
Part 1 – Introduction
1
1
2
1
2
3
4
5
1
2
3
1
2
3
4
1 USB Ports
• Storage Device Connection
Connect an external USB hard drive or a USB ash
memory device to one of the USB ports for use with
the Clip Copy feature. The external storage device
should be placed as close to the NVR as possible. It is
recommended that you use a connection cable that is
no longer than 180cm in length. Use the connection
cable included with your external storage device to
connect the device to one of NVR's USB ports. For
more information Clip Copy, refer to the 5 Clip-Copy
on page 67.
• Peripheral Device Connection
Use the USB ports to connect peripherals such as a
USB mouse to the NVR. You can also use a USB-toserial converter and connect multiple text-in devices
to the NVR at the same time.
For USB ash memory devices, the NVR supports
the FAT32 le format only.
2 Camera Button
Pressing the Camera button while in Live or Playback
mode displays images from the selected camera in full
screen. To select a camera whose channel is made up
of two digits, enter the digits in sequence using the
number keys.
3 LEDs
• HDD LED: Flashes when data is being written on
the HDD or a video search is in progress.
• Alarm LED: Lights up in red when an alarm event
occurs.
4 Panic Recording Button
Pressing the PANIC button displays the
icon and
commences recording irrespective of the current
schedule.
Press the button again to deactivate Panic Recording
mode.
5 Alarm Button
Pressing the ALARM button while the alarm has been
activated resets all NVR outputs, including the builtin buzzer. Pressing the button while the alarm is o
displays the event log on the screen.
returns the screen to Live mode.
7 Display Button
Press the DISPLAY button to toggle screen formats.
8 PTZ Button
Pressing the PTZ button initiates PTZ mode, allowing
you to control PTZ cameras.
In PTZ mode, use the arrow buttons to move the
camera up, down, left, and right.
1
Zoom-In
2
Zoom-Out
3
Focus Near
4
Focus Far
5
Preset View
6
Preset SET
9 Menu Button
Pressing and holding the MENU button for 3 seconds
while in Live mode displays the Live menu.
Pressing the MENU button while in Search mode
displays the Search menu.
Press the button once more to close the menu.
Pressing and holding the MENU button for 3 seconds
while in Playback mode activates One-Touch mode
and displays the clip copy window.
0 Arrow and Playback Control Buttons
These buttons are used to select menus and options.
Plays the video in normal speed
Play/Pause
(") Buttons
and displays r on the screen.
Press again during playback to
pause the video and display
the screen.
Up/Down/Left/Right Buttons:
Moves the focus up, down, left,
Setup Menu
or right.
Up/Down Buttons: Increases or
decreases values.
on
6 Search Mode Button
Pressing the SEARCH button initiates Search mode,
which will allow you to search for and play back video
recordings.
Pressing the SEARCH button while in Search mode
12
From paused state:
% Button: To the previous screen
& Button: To the next screen
Button: Scans backward
Playback
Mode
through the video at a fast rate.
(Press to cycle through
and
the speed)
! Button: Scans forward through
the video at a fast rate.(Press to
cycle through
speed)
Connections on the Front Panel
Part 1 – Introduction
, ,
, , and the
Flash Memory
Mouse
USB HDD
IR Remote Control
13
Part 1 – Introduction
Rear Panel
1
5
6 8
@
2
Factory Reset Button
1
HDMI Out Port
4
Network Port
7
RS-232 Port
0
Rear Panel Connections
Monitor Connection
Connect to the VGA OUT or HDMI port.
Audio Connection
3
Audio Ports
2
eSATA Port
5
Video In / Ext. Port
8
Power In Port (12V)
!
4
7
VGA Out Port
3
Video In / PoE Ports
6
Alarm Connection Ports
9
Power In Port (48V)
@
9
!
0
Video Connection
• Video In/PoE Port
Connect network cameras or video encoders to the NVR
using RJ-45 cable (Cat5, Cat5e, or Cat6).
Connect the speakers with a built-in amplier to the
AUDIO OUT port. Use the AUDIO OUT port to listen to
audio from network cameras.
• This NVR does not feature a built-in audio amplier
unit and therefore requires the user to purchase a
speaker system with a built-in amplier separately.
• Check your local laws and regulations on making
audio recordings.
14
• Green LED on the right will turn on when PoE comes
on line. Orange LED on the left will then ash once a
link has been established.
• If more than 16 cameras from video encoders are
registered on the NVR, video may not be displayed
smoothly in a remote program.
Part 1 – Introduction
• Video In/Ext. Port
This port does not support PoE. It's possible to establish
a network with network cameras and external hubs
using a Cat6 cable.
• This port is only available in Recorders with 8/16
channels.
• Green LED on the right will turn on if connected to
a 1000 BASE-T network. Orange LED on the left will
then ash once a link has been established.
• When using a Cat5e cable, the data transfer speed
may decrease depending on how to establish a
network.
eSATA Connection
Connect external hard drives to these ports.
Green LED on the right will begin to ash if connected
a 1000 BASE-T network. Orange LED on the left will
then ash once a link has been established.
RS-232 Connection
Connect an external device such as a POS unit to this
port.
Alarm Connection
Connect alarm connectors to these ports.
Do not connect or disconnect an eSATA device while
the NVR is powered on. To connect an eSATA device,
rst turn o the NVR and unplug the power cable.
Connect the eSATA device and then power the eSATA
device rst and then NVR back on. To disconnect an
eSATA device, rst turn o the NVR and unplug the
power cable. Turn o the eSATA device and then
disconnect the eSATA connection cable.
Network Connection
This NVR is capable of connecting to networks via an
ethernet connector. Connect an RJ-45 cable (Cat5,
Cat5e, or Cat6) to the NVR's network port. It's possible to
operate and upgrade the NVR remotely over a network.
Fore more information on ethernet connection setup,
refer to Network Setup on page 51.
Press down on the button and insert the cable into
the opening. Release the button and then pull on the
cable slightly to ensure it is held securely in place. To
disconnect the cable, press down on the button again
and pull the cable out.
• Alarm In 1 through 4
This NVR is capable of responding to event signals
from external alarm in devices. Connect mechanical
or electrical switches to AI 1 through 4 and the GND
(ground) connector. In order to be recognized by the
NVR, the signal from an alarm in device must be less
than 0.3V and maintained for at least 0.5 seconds. The
alarm in voltage range is 0V to 5V. For more information
on alarm in setup, refer to the Alarm-In on page 48.
• GND (Ground)
Connect alarm in or out's ground cable to the GND
connector.
All connectors marked "GND" are common connectors.
15
Part 1 – Introduction
• NO (Relay Alarm Outputs)
This NVR is capable of activating/deactivating buzzers,
lights, and other external devices. Connect a mechanical
or electrical switch to NO and COM connectors.
Electrical specications are 2A sync at 125VAC and
1A sync at 30VDC. For more information on alarm out
setup, refer to the Alarm-Out on page 53.
• Connector Arrangement
ALARM IN
1 through 4
GND Ground
ALARM OUT COM Relay Common
ALARM OUT NO
Alarm In 1 through 4
Normally Open Relay Alarm
Out (connected to COM port)
Power Cable Connection
This NVR does not feature a separate power on/o
button and will turn on the moment power is supplied.
Connect the connector(12V) of adapter to the NVR and
then connect the AC power cable of adapter to the
power outlet.
Factory Reset
Located next to the Audio Out port on the rear of the
NVR is a switch that, once activated, will reset the NVR to
all its initial factory settings.
A factory reset will clear all NVR settings congured by
the user.
You will need a straightened paper clip to access the
factory reset button.
Turn o the NVR.
1
Insert a straightened paper clip into the factory reset
2
switch hole and press the switch. Turn on the NVR
while holding the switch.
Press and hold until you hear 2 beeps from the NVR's
3
internal buzzer.
All NVR settings will be returned to their factory
4
values once you remove the paper clip.
This NVR is built in PSE(Power Source Equipment) to
connect the PoE-enabled network camera. Connect the
connector(48V) of adapter to the NVR and then connect
the AC power cable of adapter to the power outlet.
• Organize the power cable so that it will not cause
people to trip over or become damaged from chairs,
cabinets, desks, and other objects in the vicinity. Do
not run the power cable underneath a rug or carpet.
• The power cable is grounded. Do not modify the
power plug even if your power outlet does not have
a ground contact.
• Do not connect multiple devices to a single power
outlet.
16
Connections on the Rear Panel
eSATA
Storage Device
Speaker
Part 1 – Introduction
HDMI Monitor
VGA Monitor
Camera
Remote
Monitoring
Camera
Keyboard
DirectIP™ Switch
Gigabit
PoE Switch
Network
Sensor
Alarm
Power (48V)
Power (12V)
POS
17
Part 1 – Introduction
Remote Control
1 2
4 5
6
3
ID Button
1
PANIC Button
2
Camera Buttons
3
STATUS Button
4
LAYOUT Button
5
PTZ Control Buttons
6
REGISTER MODE Button
7
THUMBNAIL Button
8
CALENDAR Button
9
KEYLOCK Button
0
SETUP Button
!
7 8 9
@
!
$
^
&
*
) b a
d e f
%
0
#
(
c
FREEZE Button
@
LOG Button
#
Enter Button
$
Arrow Buttons
%
ALARM Button
^
SEQUENCE Button
&
ZOOM Button
*
PTZ Button
(
VIEW Button
)
SAVE Button
a
MENU Button
b
Playback Buttons
c
BOOKMARK Button
d
CLIP COPY Button
e
18
MUTE Button
f
Part 1 – Introduction
1 ID Button
Used to assign remote control ID values.
No additional remote control assignment is
necessary if the system's ID is 0. If the system's ID is
a number between 1 and 9, however, you will need
to press the ID button and then press the system ID
number (1 through 99) on the remote control. The
(remote control) icon will appear on the upper
right corner of the NVR screen (status indication
area) to indicate successful system-to-remote control
pairing. If using multiple systems, it's possible to
control all the units with a single remote control as
long as all the system IDs are 0. For more information
on system IDs, refer to the System Setup on page
36.
2 PANIC Button
Pressing this button commences recording
irrespective of the current schedule.
Press the button again to deactivate Panic Recording
mode.
3 Camera Buttons
Pressing the Camera button while in Live or Playback
mode displays images from the selected camera in
full screen. To select a camera whose channel is made
up of two digits, enter the digits in sequence using
the number keys.
4 STATUS Button
Displays event recording device and network
statuses.
5 LAYOUT Button
2x2 > 3x3 > 4x4
6 PTZ Control Buttons
Used in PTZ mode to zoom in/out on the screen and
to shift focus between a nearby point and a far away
point.
7 REGISTER MODE Button
Used in Live mode to access Camera Registration
mode.
8 THUMBNAIL Button
Used in Playback mode to access Thumbnail Search
mode. Thumbnail Search mode displays thumbnails
of video recordings and allows you to search
recordings based on date and time parameters. (Will
be supported.)
9 CALENDAR Button
Displays a video recording playback screen that
includes a calendar.
0 KEYLOCK Button
Locks out all remote control keys. To unlock, press the
button again.
! SETUP Button
Displays the Live menu in Live mode or Control Area
menu in Search mode. Selecting Top by using this
button in the Control Area menu displays the Search
menu. For more information on the Control Area
menu, refer to Time-Lapse Search on page 64.
Press the button once more to close the menu.
Pressing this button while a camera screen is
selected by pressing the Enter ($) button in Live
mode displays the Camera menu. Selecting Camera
Registration displays NVR and IP Camera Setup
window.
Pressing and holding this button for 3 seconds
activates One-Touch mode and displays the clip copy
window. If the Search menu is displayed on the top
of the screen, One-Touch mode is not activated.
@ FREEZE Button
Used to pause Live screen.
# LOG Button
Displays system log window and allows you to search
the log.
$ Enter Button
Used to make menu option selections and register
data entries. In addition, pressing this button while
a camera screen is selected by pressing the Menu
button in Live or Playback mode displays the Camera
menu.
19
Part 1 – Introduction
% Arrow Buttons
Used to navigate through menus and interact with
GUIs. In a Setup menu, use the Up/Down Arrow
buttons to increase or decrease numerical values.
In Live or Playback mode, use the Left/Right Arrow
buttons to view the previous or next screen.
^ ALARM Button
Pressing this button while the alarm has been
activated resets all NVR outputs, including the builtin buzzer. Displays the event log on the screen when
the alarm is o in Live mode.
& SEQUENCE Button
Pressing the SEQUENCE button while in Live mode
initiates Live Sequential mode (displays channels in
sequence).
* ZOOM Button
Used to zoom in on a specic part of the screen. Once
zoomed in, use the arrow buttons to pan around.
( PTZ Button
Initiates PTZ mode and allows you to control the
selected PTZ camera.
) VIEW Button
Pressing the VIEW button while in PTZ mode displays
the preset list.
a SAVE Button
Press the SAVE button while in PTZ mode to save the
current position as a preset.
c Playback Buttons
Scans backward through the video at a fast
rate. (Press to cycle through
, , and
the speed)
Plays the video in normal speed and displays
r on the screen. Pressing the "qbutton
"
during playback pauses the video and displays
on the screen.
Scans forward through the video at a fast rate.
!
(Press to cycle through
, , and the
speed)
#
Stops the video and restores Live mode.
Skips to the previous screen (while in paused
%
state).
Skips to the next screen (while in paused
&
state).
d BOOKMARK Button
When in the playback mode, pressing the
BOOKMARK button allows you to display the
bookmark window.
e CLIP COPY Button
Used to perform Clip Copy.
f MUTE Button
Temporarily disables audio.
b MENU Button
Pressing the MENU button while in Live mode
displays the Live menu. Alternatively, pressing the
button while in Search mode displays the Search
menu. Press the button once more to close the menu.
Use the arrow buttons to select menus and options.
20
Part 2 - Getting Started
Setup Wizard
Setup Wizard lets you congure basic settings required
for operating the system.
Setup Wizard only appears during initial booting. To
use Wizard after initial booting, go to Live menu and
select Wizard.
Select a system language.
1
Quick Wizard
Select Quick Wizard.
1
Specify the current date and time and then click
2
Next.
Select the desired Setup Wizard option andd click
2
Next. (This does not appear during initial booting)
Select Cancel from any of the Wizard screen to
cancel the setup process and return to the main
setup menu.
• The new date and time settings will only be
applied after clicking Next.
• For more information on date and time
settings, refer to the Date/Time section under
System Setup on page 36.
21
Part 2 - Getting Started
Choose the desired Recording Method and click
3
Next.
Choose the desired Recording Quality and click
4
Next.
– Recording resolutions used under each recording method
and record video quality setting are as follows:
High Video
Quality Priority
Prole
Motion
Event
Record
Continuous
& Motion
Event
Record
Continuous Very high High Standard
Click Finish to exit Quick Wizard.
5
Very high High Standard
Very High
(Continuous) /
Very high (Motion)
Standard
Recording
Prole
High
(Continuous) /
High (Motion)
Longer Recording
Time Priority
Prole
Standard
(Continuous) /
Standard (Motion)
22
• Higher recording quality uses up more disk
space.
• Recording resolution is determined based on the
selected recording quality.
– High Video Quality Priority Prole: Very
high
– Standard Recording Prole: High
– Longer Recording Time Priority Prole:
Standard
Network Wizard
After exiting from Quick Wizard, you can click Go to
Network Setup and set up the network with Network
Wizard.
Select Network Wizard.
1
Part 2 - Getting Started
Specify whether the system is connected to the
2
Internet and click Next.
If you have chosen No, wait for the test to nish
and then click Finish to exit Network Wizard.
Select Network Conguration and then click
3
Next. Select either Auto Conguration or Manual
Conguration and then click Test to test the
system's current network conguration.
Enter in the Device Name eld the NVR name to be
4
registered on the FEN server and then click Check to
check its availability.
• The device name you register on the FEN
server will be a unique name used to identify
the NVR. Once registered, the name can be
used to access the NVR directly from clients
such as iRAS . Check the name's availability to
complete the registration process. The Finish
button will then become activated.
• You will be prompted with an error message if
you do not enter a name for the NVR or enter a
name already registered on the FEN server.
• Depending on the network environment,
FEN services may not be active and therefore
prevent the NVR from connecting to the
network. In this case, you will need to manually
congure the ports. For more information on
port conguration, refer to Network Setup on
page 51.
• This test must be performed before proceeding
to the next step.
• If the NVR is on a network connected to a
network that has a DHCP server, selecting Auto
Conguration retrieves LAN settings such as
IP and DNS addresses automatically. Selecting
Manual Conguration, on the other hand, lets
you specify the settings manually.
• UPnP support device not found. If this error
message is displayed, check to see if the IP router
(or NAT) supports UPnP and if UPnP has been
enabled. For more information about the router's
UPnP function, refer to the router's operation
manual.
Click Finish to exit Network Wizard.
5
23
Part 2 - Getting Started
Camera Registration
Once Network Setup Wizard is complete, click the "Scan"
button to scan for cameras connected to NVR. Also you
can delete and register cameras.
• Title: Indicates the camera's title. Left-click on the title
to edit the camera's title.
• Protocol: Select the protocol used by the camera (or
video encoder) you wish to search for.
- ONVIF: PX, PT and NX series
- iNEX: PLS-53xx
Even if the network device uses a protocol supported
by the NVR, the device itself may not be visible for
scanning and registration by the NVR. For more
information about supported network devices and
models, contact your retailer.
• Mode: Select the scan mode.
- Auto Scan (LAN): Lists cameras in a LAN
environment. If Auto Scan (LAN) fails to recognize a
camera, try using IP Address Scan instead.
- IP Address Scan: Enter the IP address of a
camera. The NVR scans for the camera matching
the specied address. If you enter IP address's
range, the NVR scans for cameras falling under
the specied address's range. By specifying an IP
address, you can also specify which port to use with
the Remote Admin feature. It is recommended that
the camera not be networked via DHCP (Dynamic
Host Conguration Protocol). If the camera is
networked via DHCP, connection to the camera may
not be made properly depending on changes in the
external network environment.
Device Scan
Click the "Scan" button and the Device Scan screen
appears.
Some functions may not be supported for the third
party cameras depending on their protocol and moel.
2
3
1
4
5
1 Mac Address: Displays the last 6 digits of the
camera's MAC address.
2 Address: Indicates the camera's searched IP address.
3 Model: Indicates the camera's model.
4 Name: Indicates the camera's name.
5 Status: Identies the camera's registration status
"registered" or "not registered."
24
Advanced Setup: Video In IP
Select Scan to commence scanning.
1
Part 2 - Getting Started
Setup
If the camera is networked but not scanned, use this
setup. This setup allows you to change the network
setting of the NVR's VIDEO IN port which is camera's
network environment. Check the camera's network
setting rst before you use this setup.
Make sure that this setting does not conict with
the WAN setting. For more information on the WAN
setting, refer to WAN on page 51 as well as the
Appendix under Recommended Network Setups.
- Link-local adress: Disables this advanced setup.
For cameras with ZeroConf function such as NX
series.
- Manual: Allows you to enter the IP address and
other network settings manually.
- DHCP Client: Retrieves an IP address and other
network settings automatically from a DHCP server.
- DHCP Server: It makes the NVR run as a DHCP
server. Select Searching DHCP Server to check
if there is any DHCP server in the same network.
If there is no DHCP server, this option is enabled.
The NVR allocates an IP address automatically in
the range of 10.10.0.128 to 10.10.254.254 by using
DHCP to the camera connected to the NVR's VIDEO
IN port.
Only cameras that are connected to the NVR via
VIDEO IN ports can be scanned and registered.
Select a camera from the scan list and then select
2
Add Camera. The device login window will appear.
Enter a User ID and a Password for the selected
3
camera.
- Apply to All Devices: Selects to apply the same
user and password to all selected devices if you
selected more than one device and the selected
devices have the same user ID and password.
When several NVRs exist in the same network, only
one of NVRs has to be run as a DHCP server.
25
Part 2 - Getting Started
Camera Registration Mode
While in Live mode, right-click and select Camera
Registration.
Login
Conguring the NVR's settings and accessing its
searching and other functions require an authorized
user login.
While in Live mode, right-click on the mouse and
1
select Login and either press the SETUP button on
the remote control.
Select a user, enter the password, and then select
2
OK.
• There is no default password for the admin
account. Select admin and then OK without
entering a password to log in.
• Leaving the admin account unassigned with
a password poses a security risk. Please assign
a password at your earliest convenience. A
warning message will continue to be displayed
until a password is assigned.
• Click on the
eld using the mouse. This will bring up a
virtual keyboard you can use to assign a
password. For more information on using the
virtual keyboard, refer to the Text Input via
Virtual Keyboard on page 38.
button next to the password
26
To log out, right-click on the mouse and select
3
Logout.
Part 2 - Getting Started
Live Mode
Live Menu
Press the MENU button on the NVR's front panel while in Live mode to bring up the Live menu on the right edge of
the screen. Press MENU button once more to hide the menu. Use the Arrow buttons on the remote control to select
the menu options.
1
2
3
#
Layout
1
Select Camera
5
Alarm
9
Status Indication
#
Placing the mouse pointer near the right edge portion of the screen also displays the Live menu.
2
6
0
Display
Seqeunce
Status
Previous Group,
3
Next Group
Freeze
7
Wizard
!
Search Mode
4
Panic Recording
8
Setup
@
4
5
6
7
8
9
0
!
@
27
Loading...