Eneo NLS-1401 Instruction Manual

New

H.264 Network Transmitter

Instruction Guide

English Version 1.0

Model : NLS-1401

2

3

1. Product Description

This manual applies to the Network Transmitter – NLS-1401.
The NLS-1401 supports the network service for an existing anal og camera. An

analog image entered can be monitored on a real-time screen regardless of
distances and locations. By using its dedicated program, many users are able to
have an access to the NLS-1401 at once or a single user can monitor various
NLS-1401s at the same time. It also enables users to play, store and retrieve a
monitoring image by using a PC. All the settings and real-time monitoring
screens are also provided through an access to the web.

The NLS-1401 is a one-port video transmitter including two-way audio, fully
featured for security surveillance and remote monitoring needs. It is based on
the DSP compression chip, and can digitize one analog video source and make it
available on the network as real-time, full frame rate Motion JPEG and H.264
(or MPEG-4) video streams.

The NLS-1401 is equipped with RS-485 port for connecting third party PTZ
systems. The alarm input and alarm output can be used to connect various third
party devices, such as, door sensors and alarm bells.

Installation Steps

Follow these steps to install the Network Transmitter on your local network
(LAN):

1. Check the package contents against the list below.

2. Connect the NLS-1401. See page 5.

3. Set an IP address. See page 5.

4. Set the password. See page 7.

Package Components

The system comes with the following components:

NLS-1401 Installation CD Installation Guide

Mounting Bracket Mounting Screws

4

Contents in the installation CD

1. The NLS-1401 User’s Manual

2. The NT-Manager16 Clie n t Software User’s Manual

3. The NT-Manager16 Installation software

Mounting

The NLS-1401 is supplied with a mounting kit for wall mounting. The mounting
bracket can be positioned for mounting the Network Transmitter on a vertical
surface.

Overview

• Front Panel

NO Function Description

1 USB

One USB port is provided to conne ct external USB

memory stick for archiving video or syst em upgrade.
2 Reset Button Press this button to restore the factory default settings
3 Network Indicator Lights when a remote user is connected to the unit.
4 Power Indicator Lights when the power is on.

• Rear Panel