Eneo NLD-1401 Installation Manual

New

H.264 Network Ca mera

Installation Guide

English Version 1.0

Model : NLD-1401

2

3

1. Product Description

This manual applies to the NLD-1401 dome.
The NLD-1401 vandal resistant dome is a Hybrid analogue and IP camera. It

has a standard composite BNC out put allowing it to be connected via coax to a
traditional coax based CCTV system, as well as being connected to an IP based
system.

The NLD-1401 comes supplied with its own viewing software which allows the user
to View, record and configures the camera. Viewing and configuration can also be
carried out via a web browser such as Internet Explorer.

The alarm input and alarm output can be used to connect various third party
devices, such as, door sensors and alarm bells.

Installation Steps

Follow these steps to install the NLD-1401 on your local network (LAN):

1. Check the package contents against the list below.

2. Connect the NLD-1401. See page 5.

3. Set an IP address. See page 5.

4. Set the password. See page 7.

Package Components

The system comes with the following components:

NLD-1401 Installation CD Installation Guide

Contents in the installation CD

1. The NLD-1401 User’s Manual

2. The NT-Manager16 Clie n t Software User’s Manual

3. The NT-Manager16 Installation software

4

2. Installation

For the operation of the NLD-1401, it is necessary to connect: a network cable
for data transmission; a power connecti on from the supplie d power adapter and
possibly a coax cable for standard analogue viewing. Depending on operation
methods, it is possible to connect: alarm cables and audio cable.

Overview

• Top View

NO Name Description

1 Lens Allows wide area to be monitored
2 Extension Cable 26pin camera extension cable

• Extension Cable

NO Wire Color Description

1

Red: AC24V/DC12V
White: AC24V/GND

Main Power, 2pin terminal, DC12V/AC24V, max. 6.5W

2

Green: AC24V/DC12V
Black: AC24V/GND

Heater Power, 2pin terminal, max. 10Watt @ DC12V,
max. 10W @ AC24V