Endress+Hauser ADK07 Specifications

Product Overview

ADK07 – Vehicle Docking

Front

No. Item

1 Latch

Mounting holes for VESA

2

mount

3 Alignment port (x2)

4 Docking connector

5 Latch bar (with key slot)

No. Item

1 LAN (RJ-45) port

2 USB3.0 port (x2)

3 WWAN antenna port

Rear

4 USB2.0 port (x2)

5 HDMI port

6 GPS antenna port

7 Serial port (RS-232)

8 DC-in jack *

9 Kensington lock slot

*Please contact dealer for appropriate adapter.

Unlock the Latch

The latch on the docking cradle is locked during packaging.

To unlock the latch, do the following:

1. Insert the latch bar key.

2. Turn it clockwise until a “click” is heard, indicating the latch bar
is released.

3. Remove the key from the key slot.

ADK07 – Vehicle Docking

Docking the R11AH Tablet PC

1. With screen side facing out and docking
connector down, insert the R11AH Tablet PC into
the alignment ports on docking cradle.

3. Fully push the latch bar into position to ensure the latch is tightly secured.

NOTE: If the latch bar cannot be pushed, adjust the latch position and repeat step 3.

2. Secure the R11AH Tablet PC by pulling the latch
forward until a “click” is heard and the latch is
fully engaged.

Undocking the R11AH Tablet PC

1. Insert the latch bar key into the latch bar and
turn clockwise until a “click” is heard. Refer to
the “Unlock the Latch” section.

2. While supporting the R11AH Tablet PC with one
hand, push the latch backward until it fully
disengages.