Emulex OCe14000 data sheet

Page 1
OCe14000 10Gb and 40Gb Ethernet Network Adapters
CONNECT - DATA SHEET
High Performance Networking for Enterprise Virtualization and the Cloud
Overview
As the fourth generation of the Emulex OneConnect® product line, the OCe14000 family of Ethernet network adapters provides high per formance 10Gb Ethernet (10GbE) and 40GbE connectivity delivering multiple benefits for the enterprise cloud, including:
n
Increasing data center IT agility and scalability through deployment of a secure
n
Optimizing server hardware utilization by scaling high density virtualization
n
Delivering user-controlled bandwidth partitioning across workloads and
n
Choice of single-port, dual-port or quad-por t 10GbE SFP+ or single-port 40GbE
The OCe14000 family of 10GbE and 40GbE network adapters is designed for the high bandwidth and scalabilit y demands of enterprise applications, more scalable virtualization with support for RDMA trac over Converged Ethernet (RoCE), enhanced Single-Root I/O Virtualization (SR-IOV) and NIC port partitioning, and next-generation overlay network technologies that address the requirements virtual machine (VM) mobilit y and massive scaling of Layer 2 subnets inside private or hybrid cloud infrastructures.
Emulex Virtual Network Exceleration (VNeX™) overlay network ooads for multi-tenant cloud networking
Scaling existing technologies for private or public multi-tenant infrastructures requires networking solutions that can enable VM-to-VM communication and virtual workload migration across Layer 2 and Layer 3 boundaries without impacting connectivity or performance.
At the same time, these solutions need to ensure isolation and security for thousands or millions of tenant networks. However, with existing technology, the available 4094 VLAN IDs are insucient to isolate/secure each tenant in a data center (private cloud) or hybrid cloud environment.
Virtual Extensible Local Area Network (VXLAN) supported by VMware and Linux, and Network Virtualization using Generic Routing Encapsulation (NVGRE) (‘supported by Microsoft’) are next-generation overlay networking solutions that address these requirements. These solutions are a frame-in-frame data packet encapsulation scheme enabling the creation of virtualized Layer 2 subnets that can span physical L3 IP net works. Trac from each VM is tunneled to a specific virtual network; the packets are then routed transparently over the existing physical infrastructure.
multi-tenant cloud
management services
QSFP+ PCIe adapters
OneConnect OCe14000 Family
Key benefits
n
Maximizes server hardware ROI with high
virtual machine density
n
Simplifies deployment of secure, scalable multi-
tenant cloud infrastructures
n
Accelerates applications performance
n
Quad-port 10GbE SFP+ or single-port 40GbE
n
Reduces complexity through the deployment
of a common network platform
n
Reduces management, infrastructure and
energy costs
Page 2
OCe14000 10Gb and 40Gb Ethernet Network Adapters
Emulex VNeX ooad technology powered by a multi-core adapter ASIC engine accelerates the performance of network virtualization by preserving legacy stateless TCP ooads and scaling methods on encapsulated packets, providing full native network performance in a virtual network environment.
Remote Direct Memory Access (RDMA) support
The OCe14000 adapters leverage RoCE enabling server to server data movement directly bet ween application memory without any CPU involvement providing high throughput and data acceleration on a standard Ethernet fabric without the need for any specialized infrastructure or management.
Optimized host virtualization density with SR-IOV support
SR-IOV optimizes I/O for VMs, enabling higher host ser ver virtualization ratios to deliver maximum ser ver return on investment (ROI). SR-IOV provides a more cost­eective solution than multiple, physical adapter ports. SR-IOV enables multiple VMs to directly access the OCe14000’s I/O resources, thus allowing VM networking I/O to bypass the host and take a path directly between the VM and the adapter, eliminating redundant I/O processing in the hypervisor. This, in turn, allows higher I/O performance, lower CPU utilization and significantly reduced latency as compared to the alternative of soft ware-emulated Network Interface Card (NIC) devices that are implemented in the hypervisor.
Optimized bandwidth allocation with Emulex Universal Multi-Channel™ port partitioning
Emulex Universal Multi-Channel (UMC) is ideal for virtualized server environments because bandwidth allocation can be optimized to support virtual machine migration, management and I/O intensive applications. UMC allows multiple Peripheral Component Interconnect (PCI) physical functions to be created on each adapter port. Each OCe14000 adapter can be configured with up to 16 functions.
Key features
n
Superior network scalability—10GbE or 40GbE
bandwidth on common software platform
n
SR-IOV
n
Data acceleration with RoCE support
n
Powerful hardware ooad for:
- Overlay networks (NVGRE and VXLAN)
- Stateless TCP
n
Greater bandwidth with PCIe 3.0
n
VMware vSphere NetQueue with RSS support
n
Microsof t Windows Server VMQ , Dynamic VMQ ,
RSS and vR SS support
Available Quad-por t 10GbE SFP+
Use cases such as Content Delivery Network (CDN) and hosting providers have standardized on 10GbE and often are looking for more bandwidth per server for the services they provide.
The Emulex quad-port 10GbE model (OCe14104) delivers 40GbE full-duplex bandwidth using a single PCIe slot. An additional benefit of this configuration is utilization of existing 10GbE SFP+ switch connections versus buying new 40GbE QSFP+ switches.
Simplified management Emulex OneCommand® Manager application
Emulex OneCommand Manager provides centralized management of Emulex OneConnect Converged Network Adapters (CNAs) and LightPulse® Host Bus Adapters (HBAs) throughout the data center from a single management console. The OneCommand Manager application provides a graphical user interface (GUI) and a scriptable command line user inter face (CLI). OneCommand Manager for VMware is fully integrated with VMware vCenter to simplif y management for vir tual server deployments.
Fourth generation platform delivers enterprise-class reliability and performance
Leveraging generations of advanced, field-proven controller and adapter technology, OCe14000 adapters meet the robust interoperability and reliability requirements of enterprise and scale-out data centers.
Page 3
OCe14000 10Gb and 40Gb Ethernet Network Adapters
SPECIFICATIONS
Controller
· Emulex Engine™ (XE)100 series (Skyhawk™) of Ethernet Controllers
Ethernet standards
· Single IEEE 802.3-2012 40GBASE Ethernet port (40GBASE-SR4/40GBASE-CR4)
· Single or Dual IEEE 802.3-2012 10GBASE Ethernet ports (10GBASE-SR/10GBASE-LR/10GBASE-CR)
· Single or dual 1GBaseX/SGMII auto negotiation
· IEEE 802.1Q virtual LANs (VLAN)
· IEEE 802.3-2012 Flow control with Pause frames
· IEEE 802.1Qbg Edge Virtual Bridging
· IEEE 802.1Qaz Enhanced Transmission Selection (ETS); Data Center Bridging Capability Exchange (DCBX)
· IEEE 802.1Qbb Priority Flow Control (PFC)
· IEEE 802.1AX Link Aggregation/LACP
· IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
· IEEE 802.1Qau Congestion Notification
Ethernet Network Interface (Layer 2 NIC) and TCP/IP
· NDIS 6.0, 6.2, 6.3-compliant Ethernet functionality
· IPv4/IPv6 TCP, UDP checksum ooad
· IPv4/IPv6 Receive Side Scaling (RSS)
· IPv4/IPv6 Large Receive Ooad (LRO)
· IPv4/IPv6 Large Send Ooad (LSO)
· Dynamic VMQ (Windows Server 2012 Hyper-V) and NetQueue (VMware vSphere)
· Programmable MAC and VLAN addresses
· 128 MAC/VLAN addresses per port
· Support for hash-based Multicast MAC address filters
· Support for hash-based Broadcast frame filters per port
· VLAN ooads (insertion and extraction)
· Jumbo frame support up to 9000 Bytes
I/O virtualization
· Stateless L2, L3, and L4 ooads for frame-in-frame encapsulation (VXLAN, NVGRE)
· PCI-SIG Address Translation Service (ATS) v1.0
· Support for up to 512 hardware queues
· Virtual Switch Port Mirroring for diagnostic purposes
· Virtual Ethernet Bridging (VEB)
· Virtual Ethernet Port Aggregator (VEPA)
· Emulex Universal Multi-Channel™ (UMC), support for up to 16 PCIe physical functions (PFs) per adapter which can be used as partitions as follows:
- OCe14401 Ethernet adapter, the port can
support 16 NIC functions
- OCe14101, OCe14102 Ethernet adapters, each
port can support eight NIC functions
- OCe14104 Ethernet adapters, each port can
support four NIC functions
- Note: the system hardware must support and
enable ARI and the host operating system must support ARI for maximum number of functions to be enabled; see Emulex UMC manual for more details
· NIC Single Root I/O Virtualization (SR-IOV)
- up to 63 virtual functions (VFs) per port
· Quality of Service (QoS) for controlling and monitoring bandwidth assigned to and used by virtual entities
· Configurable control of network bandwidth by physical port, queue, or protocol
· Trac shaping and QoS across each VF and PF
Converged Enhanced Ethernet (CEE) and Datacenter Bridging (DCB)
· IEEE 802.1Qbb Priority Flow Control (PFC)
· IEEE 802.1Qaz Enhanced Transmission Selection (ETS)
· IEEE 802.1Qaz Data Center Bridging Exchange (DCBX)
· IEEE 802.1Qau Congestion Notification (QCN)
· Absolute per-priority rate control option/ configuration
Remote Direct Memory Access (RDMA)
· Direct data placement in application buers without CPU intervention
· Supports IBTA RoCE specifications
· Linux Open Fabrics Enterprise Distribution (OFED) support
· Support for Linux Network File System (NFS) over RoCE, iSCSI Extensions for RDMA (iSER)
· Low latency queues for small packet sends and receives
· Windows Server SMB Direct (SMB over RDMA)
PCI Express (PCIe) interface
· PCIe 3.0 x8 (8, 5.0, and 2.5 GT/s per lane) compliant interface:
- Up to 64 Gb/s full duplex bandwidth
- Configurable width and speed to optimize
power versus bandwidth
· Support for up to 16 PCIe physical functions (PFs)
· Support for x1, x2, x4, and x8 links widths
· NIC Single Root I/O Virtualization (SR-IOV)
- up to 63 virtual functions (VFs) per port
· Message Signal Interrupts Extended (MSI-X)
· Advanced Error Reporting (AER)
· Completion Timeout (CTO)
· Function Level Reset (FLR)
· Alternative Routing ID Interpretation (ARI)
Comprehensive OS support
· Windows
· Red Hat Enterprise Linux
· SUSE Linux Enterprise Server
· Oracle Linux
· VMware vSphere
· CentOS
· Debian
· Ubuntu
· FreeBSD
Management, boot support
· vCenter management plugin support
· Role-based management, integrated with Active Directory and LDAP
· Multi-channel configuration and bandwidth control
· UEFI and x86 remote boot support including PXE v2.1, UEFI 2.3.1
· MAC statistics gathering (SNMP, Ethernet MIB, MIB2, RMON, RMON2)
· Oine and online firmware updates
· Integrated thermal sensor works with management utilities
Hardware environments
· x86, x64 servers
Please refer to the product page on
www.emulex.com for further details.
Page 4
SPECIFICATIONS
OCe14000 10Gb and 40Gb Ethernet Network Adapters
Interconnect
Copper
· SFP+ Direct Attached Twin-Ax Copper interface
· Standards compliant passive copper cables up to 5m and active copper cables up to 10m
Optical
· Optic 10GBASE-SR short wave lasers with LC type connector supported up to 300m on laser­optimized OM3 multimode fiber (MMF) cables
· Optic 40GBASE-SR4 short wave lasers with MPO type connector supported up to 100m for OM3 and 150m for OM4 respectively on MMF cables
· Optic 10GBASE-LR long wave lasers with LC type connector supported up to 10Km single mode fiber (SMF) cable, Ethernet use only
Physical dimensions
· For 1-port and 2-port adapters
· Short, low profile MD2 form factor card
· 167.64mm x 68.91mm (6.60” x 2.71”)
· Standard, full height bracket installed (low­profile bracket ships in box)
· For 4-port adapters:
· Standard, full-height form factor
· 167.64 mm by 111.15 mm (6.60” x 4.376”)
· Standard, full height bracket installed
Environmental requirements
· Operating temperature: 0° to 55°C (32° to 131°F)
· Storage temperature: -40° to 70°C (-40° to 158°F)
· Relative humidity: 5% to 95% non-condensing
Agency and product safety approvals
North America
· FCC/Industry Canada Class A
· UL/CSA Recognized
· Class 1 Laser Product per DHHS 21CFR (J)
Europe
· CE Mark
· EU RoHS compliant
· TUV Bauart Certified
· Class 1 Laser Product per EN60825-1
Australia
· C-Tick or RCM Mark
Japan
· VCCI Class A
Taiwan
· BSMI Class A
Korea
· MSIP (formally KCC/MIC) Class A
China
· China RoHS Compliant
Ordering information
1
Adapters
OCe14101-NX
· Single-port, 10GBASE-CR (direct attach copper) SFP+, Ethernet Network Adapter
OCe14101-NM
· Single-port, 10GBASE-SR (short reach optical) SFP+, Ethernet Network Adapter, Optics included
OCe14102-NX
· Dual-port, 10GBASE-CR (direct attach copper) SFP+, Ethernet Network Adapter
OCe14102-NM
· Dual-port, 10GBASE-SR (short reach optical) SFP+, Ethernet Network Adapter, Optics included
OCe14104-NX
· Quad-port, 10GBASE-CR (direct attach copper) SFP+, Ethernet Network Adapter
OCe14104-NM
· Quad-port, 10GBASE-SR (short reach optical) SFP+, Ethernet Network Adapter, Optics included
OCe14401-NX
· Single-port, 40GBASE-CR4 (direct attach copper) QSFP+, Ethernet Network Adapter
Optional Accessories
OC10-SR-OPT-1
· 10GBASE-SR (short reach optical) SFP+ Optical Kit, 1 pc
OC10-SR-OPT-2
· 10GBASE-SR (short reach optical) SFP+ Optical Kit, 2 pcs
OC10-LR-OPT-1
· 10GBASE-LR (long reach optical) SFP+ Optical Kit, 1 pc, for Ethernet use only
OC40-SR4-OPT-1
· 40GBASE-SR4 (short reach optical) QSFP+ Optical Kit, 1pc
2
1
For optical adapter support, a customer must
either order a short reach optical model or a direct attach copper model with an Emulex accessory transceiver kit.
2
Only Emulex Accessories are warranted and fully
supported by Technical Support.
World Headquarters 3333 Susan Street, Costa Mesa, CA 92626 +1 714 662 5600 Bangalore, India +91 80 40156789 | Beijing, China +86 10 84400221 Dublin, Ireland +35 3 (0) 1 652 1700 | Munich, Germany +49 (0) 89 97007 177 Paris, France +33 (0) 158 580 022 | Tokyo, Japan +81 3 5325 3261 | Singapore +65 6866 3768 Wokingham, United Kingdom +44 (0) 118 977 2929 | Brazil +55 11 3443 7735
©2015 Emulex, Inc. All rights reserved. This document refers to various companies and products by their trade names. In most cases, their respective companies claim these designations as trademarks or registered trademarks. This information is provided for reference only. Although this information is believed to be accurate and reliable at the time of publication, Emulex assumes no responsibility for errors or omissions. Emulex reserves the right to make changes or corrections without notice. This document is the property of Emulex and may not be duplicated without permission from the Company.
www.emulex.com
ELX15-2459 · 3/15
Loading...