Page 1
Owner’s ManualOwner’s Manual
Page 2
Owner’s Manual
© 2006 E-MU Systems
All Rights Reserved
Revision: A
E-MU World Headquarters
E-MU Systems
1500 Green Hills Road
Scotts Valley, CA 95066
USA
Asia Pacific, Africa, Middle East
Creative Technology Ltd
31 International Business Park
Creative Resource, Singapore 609921
SINGAPORE
Europe
Creative Labs (Ireland) Ltd
Ballycoolin Business Park
Blanchardstown, Dublin 15
IRELAND
Japan
Creative Media K. K.
Kanda Eight Bldg., 3F
4-6-7 Soto-Kanda
Chiyoda-ku, Tokyo 101-0021
JAPAN
E-MU Systems 2
Page 3
TABLE OF CONTENTS
Introduction .................................................................................5
Package Includes .......................................................................... 6
Computer Requirements ............................................................... 6
Windows .......................................................................................................6
Software Installation .................................................................... 7
Windows XP ......................................................................................................7
Note About Windows Logo Testing ................................................................ 7
Uninstalling all Audio Drivers and Applications ................................................7
Connection Diagram .................................................................... 8
Controls & Headphone Output ..................................................... 9
Input/Output - 0202 ...................................................................10
E-MU USB Audio Control Panel ...................................................11
Direct Monitoring .......................................................................12
Tutorials .....................................................................................13
Introduction ....................................................................................................13
Before you Begin... ......................................................................................13
Getting Started with Steinberg Cubase LE ........................................................13
1 - Setting up Cubase LE ..............................................................................13
2 - Basic Multitrack Recording .......................................................................15
3 - Recording a MIDI Track using Proteus VX .................................................17
Getting Started with Cakewalk Sonar LE ...........................................................20
1 - Setting up Sonar LE ................................................................................. 20
2 - Basic Multitrack Recording .......................................................................23
3 - Recording a MIDI Track using Proteus VX .................................................25
Troubleshooting ..............................................................................................29
Internet References ..........................................................................................30
Forums ........................................................................................................30
Technical Specifications .............................................................. 31
Index ......................................................................................... 33
0202 USB 2.0 Owner’s Manual 3
Page 4
E-MU Systems 4
Page 5
Introduction
INTRODUCTION
Thanks for your purchase of the E-MU 0202 USB 2.0 Audio/MIDI Interface. This
interface brings an unparalleled level of USB audio quality to the PC, with pristine
24-bit/192kHz A/D and D/A converters, ultra-low jitter clock, and XTC™ Class-A,
ultra-low noise mic/line/hi-Z preamps. The signal-to-noise specs of the
E-MU 0202 USB 2.0 are unmatched by any other USB interface on the market!
From its plug-and-play functionality and hands-on ergonomic design, to professional features like zero-latency direct monitoring, the USB will forever change
your expectations of USB audio. The USB also comes complete with the powerful
E-MU Production Tools Software Bundle so that you have everything you need to
create, record, edit, mix and burn your music right out of the box.
Some of the other key features are detailed below:
• Record and Playback support for a multitude of sample rates
(44.1k, 48k, 88.2k, 96k, 176.4k, 192 k)
• Independent ground lift switches for both analog inputs help to solve
potential ground loop problems
• Studio-Grade Headphone Amplifier with level control
• Main Output level control
NOTE
There are some limitations
when operating at higher
sample rates. See the
included ReadMe file, and/
or www.emu.com
information.
for latest
0202 USB 2.0 Owner’s Manual 5
Page 6
Package Includes
PACKAGE INCLUDES
• E-MU 0202 USB 2.0 AudioPod
•USB Cable
• Quick Start Installation Guide
E-MU Software/Manual CD-ROM
• Window XP and x64 Drivers
• Owner’s Manual and Tutorials
E-MU Production Tools Software Bundle CD-ROM
• Cakewalk Sonar LE
• Steinberg Cubase LE
• Ableton Live Lite 4 for E-MU
• Steinberg Wavelab Lite
• IK Multimedia AmpliTube LE
• SFX Machine LT
• Minnetonka diskWelder BRONZE (trial)
E-MU Proteus® VX CD-ROM with over 1000 sounds included
COMPUTER REQUIREMENTS
The minimum computer system requirements for the E-MU 0202 USB 2.0 are
listed below.
Windows
• Intel® or AMD® processor — 1.2 GHz or faster
• Intel, AMD, or 100% compatible motherboard & chipset
• Microsoft® Windows® XP (SP 2 or greater) or Windows XP x64
• 1 available (Hi-Speed) USB 2.0 port *
•256 MB System RAM
• 900 MB of free hard disk space for full installation
• CD-ROM/CD-RW or DVD-ROM drive required for software installation
• XVGA Video (1024 x 768)
* When using a USB 1.1 port, performance is limited to16-bit and 44.1/48 kHz recording
and playback.
E-MU Systems 6
Page 7
Software Installation
SOFTWARE INSTALLATION
Windows XP
Follow these instructions to install the 0202 USB 2.0 software and E-MU
Production Tools software bundle on a Windows XP computer.
1. First connect the 0202 USB 2.0 to your computer using the supplied USB
cable, and turn it on.
2. If Windows prompts you with an Add New Hardware Wizard, click Cancel.
3. Insert the E-MU software Installation CD into your CD-ROM drive. If
Windows AutoPlay mode is enabled for your CD-ROM drive, the CD starts
running automatically. If not, from your Windows desktop, click Start->Run
and type d:\setup.exe (replace d:\ with the drive letter of your CD-ROM
drive). You can also simply open the CD and double-click Setup.exe.
4. The installation splash screen appears. Follow the instructions on the screen to
complete the installation. You will have the option to install 0202 USB 2.0,
and Adobe Acrobat Reader.
5. Choose “Continue Anyway” when you encounter the “Windows Logo
Testing” warning screen. See the note below.
6. When prompted, restart your computer.
7. Be sure to register your 0202 USB 2.0 so we can advise you of future software
updates and special offers.
8. Your 0202 USB 2.0 is now ready to use.
9. Insert the Windows Production Tools Software Bundle CD-ROM into your
CD-ROM drive.
10. The installation splash screen appears. Follow the instructions on the screen to
complete the installation.
Note About Windows Logo Testing
When you install the 0202 USB 2.0 drivers, you will see a dialog box that informs
you that the driver has not passed Windows Logo testing.
However, the 0202 USB 2.0 drivers have been rigorously tested using the same test
procedures that a signed driver requires, and it passes in all important categories,
including those that measure the relative stability of the driver. So, it is perfectly
safe to install these drivers on your computer.
Uninstalling all Audio Drivers and Applications
At times you may need to uninstall or reinstall the 0202 USB 2.0 application and
device drivers to correct problems, change configurations, or upgrade outdated
drivers or applications. Before you begin, close the E-MU USB 2.0 Audio control
application. Applications running during the uninstallation will not be removed.
1. Click Start -> Control Panel.
2. Double-click the Add/Remove Programs icon.
3. Click the Install/Uninstall tab (or Change or Remove Programs button).
4. Select the E-MU 0202 USB 2.0 entry and then click the Change/Remove
button.
5. In the InstallShield Wizard dialog box, select the Remove ALL option.
6. Click the Yes button.
7. Restart your computer when prompted.
You may now re-install existing or updated E-MU device drivers or applications.
0202 USB 2.0 Owner’s Manual 7
Page 8
Connection Diagram
CONNECTION DIAGRAM
Microphone
or Line
WARNING!
Use only a USB 2.0
certified Hi-Speed cable
(like the one supplied) for
the USB connection. Using
a USB 1.1 cable may cause
erractic behavior and
degraded performance.
Computer
1/4” male to 1/4” male
(unbalanced)
Powered Speakers
E-MU Systems 8
Page 9
Controls & Headphone Output
CONTROLS & HEADPHONE OUTPUT
L - Mic / Line
Clip
-12 -12
0 +60 dB 0+60 dB
R - Hi-Z / Line Direct Monitor
Clip
Stereo
Mono
Off
2 34 5 61
1. Signal Level & Clip Indicators
The LED signal level indicators show that you are inputing a proper signal
level. With a proper input level, the green signal LED should be flickering, but
the red clip indicator should NOT ever be lit.
The clip indicators light and show that the input level has exceeded -2.5 dBFS.
2. Left/Right Gain Controls
These controls set the input gain from 0dB to +60dB for the two inputs.
3. Direct Monitor Level Control
This encoder controls the amount of direct monitor signal mixed into the
main outputs and is adjustable from -24dB to off.
4. Direct Monitor On/Off & Mono-Stereo Switch
Press the button to turn Direct Monitoring on and off and to switch modes.
The stereo LED illuminates. The left and right channels are passed through to
their respective outputs at the level set by the Direct Monitor Level control.
Press the button again to sum the left and right direct monitor channels to
mono. Mono mode is useful when the two inputs are being used for separate
instruments.
Power
5. Headphone Jack
Connect your stereo headphones here.
6. Headphone Level Control
This knob controls the volume of the headphone output. This switch also
turns the 0202 USB 2.0 on or off.
0202 USB 2.0 Owner’s Manual 9
Page 10
Input/Output - 0202
INPUT/OUTPUT - 0202
NOTE
When using a USB 1.1 port,
performance is limited to
16-bit and 44.1/48 kHz
recording and playback.
Hi Z / Line
Inputs
L - Mic
10
L -
Hi-Z / Line
Outputs
USB
R R -
7911
L
1 Main
8
7. USB
Connects the 0202 USB 2.0 to your computer via the supplied USB cable. The
USB connection provides two-way communication when connected to the
computer.
The 0202 USB 2.0 receives its power from the USB. Always connect to the USB
jack on the computer itself and NOT to a low-power USB connection that
may be present on your computer keyboard or other USB peripheral.
8. Main Outputs
The unbalanced outputs are normally connected to your monitoring system.
The signal is duplicated on a stereo 1/8¨ jack for easy connection to desktop
stereo speakers. The outputs are designed using a special noise-cancelling
circuit which reduces problems relating to ground loops.
Mic
9. R - Hi Z / Line Input
This 1/4¨ input can be used as a Hi-Z instrument input (guitar/bass, etc.) or a
line level input. The input is balanced, but accepts either balanced or unbalanced signals.
10. L - 1/8¨ Mic Input
Connect microphones with 1/8¨ plugs to this jack.
11. L - Hi-Z / Line / Mic Input
Use the XLR connector for microphones or balanced line level signals. Use the
1/4¨ in the center of the XLR jack as a Hi-Z input for guitar/bass, or as a line
level input. The input is balanced, but accepts either balanced or unbalanced
signals.
Ground Lift Switches
There are “ground lift” switches for both analog inputs located on the bottom
of the unit. These switches can be used to safely stop the hum if a ground loop
occurs in your setup. See page 29
for more information.
E-MU Systems 10
Page 11
E-MU USB Audio Control Panel
E-MU USB AUDIO CONTROL PANEL
After you have successfully installed the audio drivers, launch the E-MU USB
Audio control panel. The E-MU USB Audio control panel is shown below.
The E-MU USB Audio control icon will be visible in the Taskbar, which is normally
located in the bottom right of the screen. It can also be launched from the Start
Menu (All Programs, Creative Professional, E-MU USB Audio Application).
23
1
4
5
1. Skin
Choose between different appearances for the E-MU USB Audio control
panel.
2. View
Hide the application (Ctrl+H). You can restore the application by clicking the
E-MU icon in the System Tray.
3. Help
About E-MU 0202 USB 2.0, Audio control, Launch Manual, Check Updates
4. Device
If you are using more than one E-MU USB Audio device, you can choose
which unit is currently being controlled.
5. Sample Rate
Allows you to set the system sample rate: 44.1kHz, 48kHz, 88.2kHz, 96kHz,
176.4kHz or 192kHz.
NOTE
There are some limitations
when operating at higher
sample rates. See the
included ReadMe file, and/
or www.emu.com
information.
for latest
0202 USB 2.0 Owner’s Manual 11
Page 12
Direct Monitoring
DIRECT MONITORING
When using a computer for digital recording, an audible time delay occurs while
the audio signal is being input to the computer, processed by the software and then
returned to the output for monitoring. This time delay is called Latency.
Latency becomes a problem when you have to use high ASIO Buffer settings to
conserve CPU resources. Because the 0202 USB 2.0 has hardware direct
monitoring, you can enjoy zero latency regardless of your ASIO Buffer setting.
The Direct Monitor feature connects the input signals to the output when recording
so that you can hear your performance without delay. The Direct Monitor level
control lets you adjust the volume of the input signal in relation to the recorded
tracks.
Direct monitoring is controlled manually from the Direct Monitor switch on the
0202 USB 2.0. It’s not necessary to turn it on in your recording application
Latency (delay)
USB
Software Monitoring
Direct Monitoring
Direct Monitoring allows you to listen to the direct sound of your instrument during
recording, without the delay incurred by going to the computer and back.
E-MU Systems 12
Page 13
Tutorials
TUTORI ALS
Introduction
This guide contains step-by-step walk-throughs of basic recording operations using
your E-MU 0202 USB 2.0 interface with software applications for your Windows
computer. We encourage you to perform the steps on your computer as you read
so that you become familiar with the process. The first tutorial only takes about
half an hour to complete, by which time you’ll know how to make a multitrack
recording.
IMPORTANT NOTE:
If you need additional help with the bundled applications, please see:
Program Files\Creative Professional\E-MU 0202 USB\Documents\
3rdParty.htm.
Before you Begin...
• You should have already installed the E-MU software on your computer
• You should hear the computer sounds coming out of the E-MU 0202 USB 2.0
and your speakers when you play a CD or an MP3 using Windows Media
Player. If not, make sure your E-MU 0202 USB 2.0 is properly connected
according to the diagram on page 10
• A source of audio should be connected to the inputs (a microphone, musical
instrument, or CD/MP3 player).
.
Getting Started with Steinberg Cubase LE
Steinberg Cubase LE is a 24-bit, multi-track audio/MIDI sequencer with highquality effects, automation, virtual instruments (VSTi), and many other professional features.
The following step-by-step tutorials are designed to get you recording as quickly as
possible. After you have finished the tutorial we encourage you to read the Cubase
LE PDF manual in order to learn about the many features of this powerful
program.
1 - Setting up Cubase LE
Follow these instructions carefully to ensure that Cubase LE runs smoothly the first
time. Cubase LE will remember these settings, so you’ll only have to do this once.
1. Open Cubase LE from the Start menu. An ASIO multimedia driver test dialog
box will pop up to ask if you want to run the ASIO test. Choose No, because
you won’t be using the driver anyway.
2. Select New Project from the File menu.
3. Select Empty and click OK.
4. A Select Directory pop-up dialog box
will appear. Choose a location on your
hard disk where you want to store your
audio files, then click OK.
5. The Cubase LE Project window appears.
TIP . . .
If you have two or more
hard disks, it’s better to
store audio files on a disk
that isn’t running your
OS.
6. Select Device Setup… from the Devices
menu.
0202 USB 2.0 Owner’s Manual 13
Page 14
Tutorials
7. Select VST Multitrack from the Devices list.
8. In the Setup section of the dialog box, select “ASIO E-MU 0202
Buffer Latency Setting
9. Click the Control Panel button. The popup dialog box shown at right appears.
10. Set the ASIO Buffer Latency as low as
your computer will allow and click OK.
A low latency setting is important to
assure fast response when using virtual
instruments and to minimize delay when
monitoring through Cubase. If you hear
crackles or other audio problems, try increasing the Buffer Size.
11. Close the Device Setup screen by clicking OK.
12. Note: If the Cubase LE application crashes for any reason, it is recommended
that you re-boot the computer.
E-MU Systems 14
Page 15
Tutorials
2 - Basic Multitrack Recording
This tutorial assumes you’re using a single input or a pair of inputs. For more
advanced recording, refer to the Cubase LE manual.
Add an Audio Track
1. From the Cubase LE menu bar, select Project, Add Track, Audio. An audio
track is added to the project window.
Inspector button
Track InputMonitor
Stereo/Mono button
2. The screen shows the “A” input of the 0404 USB. Note that IN 1 is shown in
the Track Input field (Input A =IN1, Input B =IN2). If you want to record in
stereo, turn the Stereo/Mono button On and select IN 1 + IN 2 for the Track
Input.
3. Make sure the Monitor button is OFF. You will be monitoring the input
through the 0202 USB 2.0.
NOTE
If the Inputs aren’t available,
check Devices, VST Inputs.
4. Press the Direct Monitor button on your E-MU 0202 USB 2.0. If you are
recording a mono track, set Direct Monitor to Mono by pressing the Direct
Monitor button again.
Get Ready To Record
5. Plug in your instrument or microphone and set the input gain control for a
good signal level. The green -12 signal LED should come on, but the clip LED
should never come on. You should be hearing your instrument or microphone through your monitor speakers or headphones. If not, go back to steps
4 and 5.
0202 USB 2.0 Owner’s Manual 15
Page 16
Tutorials
NOTE
Turning on the metronome
adds a 2-bar lead-in before
recording begins.
6. Optional Step - Metronome: To toggle the Metronome on and off, press C on
the computer keyboard. To adjust the metronome output level, press the
transport Play control, then select Metronome Setup... from the Transport
menu. Use the volume slider to set the desired metronome level.
7. Make sure the Record Enable button on the track is on (it should be by
default).
Record Enable
8. Press the Record button on the Cubase transport control panel. The button
turns red and you’re recording.
Record
PlayStopGo to Start
9. When you’re finished recording your track, press the Spacebar, or press the
Stop button on the Cubase Transport Control.
10. Press the Go to Start button .
11. Press the Spacebar or press the Play button to play back your new Track.
Record Another Track
12. Press the Go to Start button .
13. Drag the audio chunk you just recorded down below itself and release the
mouse button. A new track is automatically created with your recording. This
is by far the quickest and easiest way to set up a new track in Cubase. Now
you’re all set to record again on Track 1.
Drag
14. Press the Record button on the Cubase transport control panel and you’re
recording again. You’ll hear your first track playing along with you.
15. Repeat steps 12-14 to record more audio tracks.
16. Press the Mute button to silence any tracks you don’t want to hear.
E-MU Systems 16
Page 17
Tutorials
3 - Recording a MIDI Track using Proteus VX
You’ll need a MIDI interface and a MIDI keyboard (or other MIDI input device)
for this tutorial.
Make the Connections
1. Connect the MIDI out of your MIDI keyboard to the MIDI input of your MIDI
interface.
2. From the Project menu, select Add Track, MIDI.
The Cubase Project Window should now look more or less like the one below
with one or more Audio tracks and one MIDI track:
MIDI Track
3. Click the Devices menu, and select VST Instruments.
0202 USB 2.0 Owner’s Manual 17
Page 18
Tutorials
4. From the VST Instruments window, select E-MU, then ProteusVXVSTi.
The VST Instruments window now looks like this.
Edit Button
5. Take a look at the Inspector area on the left side of the Cubase LE project
window. Make sure the input to the MIDI track is connected to the input of
your MIDI Interface.
6. The Output is not yet connected to anything. Click on the Output and select
ProteusVXVSTi.
7. Click the Edit button of the VST Instruments window to open Proteus VX.
Alternatively, you could click on the Edit button of the track Inspector to open
Proteus VX.
8. Proteus VX opens and the Proteus X Composer bank loads. This takes a few
seconds.
Play the Proteus X Composer Bank
9. Bring up the mini keyboard by clicking the icon on Proteus VX and play a
few notes. You should be hearing sound. If not, verify that the 0202 USB 2.0 is
properly configured.
10. Play your MIDI controller and verify that it plays Proteus VX.
11. Change the Preset using the inc/dec keys of the prg: field of the inspector.
The preset on Proteus VX should change to follow the one
in Cubase LE. If not, make sure the Receive Program Changes box is checked
in Proteus VX (Options, Preferences..., MIDI).
12. Feel free to play around for awhile and don’t worry about losing anything.
Nothing is made permanent until you Save the bank, so have fun.
E-MU Systems 18
Page 19
Tutorials
To Record a MIDI Track
13. Make sure the Record Enable button on the MIDI track is on (it should be by
default).
Record Enable
14. Click Record on the Cubase LE Transport control and start playing your MIDI
controller.
Record
15. Press Stop when you’re finished recording the first track.
16. Press the Go To Start button .
17. Press Play on the Cubase Transport to play back your track.
To Record a MIDI Track on another MIDI Channel
Proteus VX VSTi can play back up to 16 MIDI tracks at once. It’s much more
efficient to use several channels on one VSTi than to use multiple VSTi’s with one
channel each.
18. From the Project menu, select Add
Track, MIDI. Notice that the channel
number in the Inspector section is now
Channel
set to chn:2.
19. Select Proteus VX as the Output destination in the Inspector section.
20. Select a new Preset for this track using the inc/dec keys of the prg: field of the
inspector.
21. When you’re ready, click Record on the Cubase LE Transport and start playing.
22. Click Stop when you’re finished recording, press the Go to Start button on
the transport, then Play. Proteus VX now plays both MIDI channels.
On Your Own
Cubase LE and Proteus VX include excellent online documentation and help files.
Take the time to learn all the features of these powerful programs, and most of all
have fun.
0202 USB 2.0 Owner’s Manual 19
Page 20
Tutorials
Getting Started with Cakewalk Sonar LE
Sonar LE is a 24-bit multi-track audio/MIDI sequencer with high-quality effects,
automation, virtual instruments (VSTi/DXi), and many other professional features.
IMPORTANT: During installation of Sonar LE you will be asked to run the
Cakewalk VST Adapter. You must do this in order for Sonar to recognize Proteus
VX or any other VST plug-ins.
The following step-by-step tutorials are designed to get you recording on Sonar LE.
After you finish the tutorial we encourage you to read the Sonar LE PDF manual in
order to learn about the many features of this comprehensive program.
1 - Setting up Sonar LE
Follow these instructions carefully to ensure that Sonar LE runs smoothly the first
time. Sonar LE will remember these settings, so you’ll only have to do this once.
Run Sonar LE for the first time
1. Open Sonar LE from the Start menu or by double-clicking on the desktop
shortcut. The first time you run Sonar LE, the following dialog box appears:
2. Click No to close the dialog box. (The tests do not apply to the 0202 USB 2.0.)
Sonar LE opens and the following dialog box appears.
3. Click Close to close the dialog box. The Sonar Project Window appears.
E-MU Systems 20
Page 21
Tutorials
Setup the Audio Options
4. From the Options menu, select Audio. The following dialog box appears.
5. Click on the Advanced Tab to access the next window.
6. Select ASIO as the Driver Mode and click OK. You’ll get a pop-up dialog box
explaining that the ASIO settings won’t take effect until the next time you start
Sonar LE.
7. Close Sonar LE completely and restart the application.
0202 USB 2.0 Owner’s Manual 21
Page 22
Tutorials
Return to the Audio Setup Options
8. Once Sonar LE has restarted, select Audio from the Options menu.
TIP . . .
If you have two or more
hard disks, it’s better to store
audio files on a disk that
isn’t running your OS.
9. Click the ASIO Panel. The pop-up dialog box
shown at right appears.
10. Set the ASIO Buffer Latency as low as your computer will allow. A low latency setting is important to assure fast response when using virtual
instruments and to minimize delay when monitoring through Sonar LE. If you hear crackles or
other audio problems, try increasing the Buffer
Size.
11. Close the Audio Options screen by clicking OK.
Note: If the Sonar LE application crashes for any
reason, it is recommended that you re-boot the
computer.
Set the Location of your Audio Files
12. From the Options menu, select Global.
13. Select Audio Data, then select a location for the Global Audio Folder.
E-MU Systems 22
Page 23
Tutorials
2 - Basic Multitrack Recording
This tutorial assumes you’re using a single input or pair of inputs. For more
advanced recording, refer to the Sonar LE manual. Sonar opens by default with
with 2 audio tracks and 2 MIDI tracks.
The Sonar Project Window
Inspector Restore Strip Size
Track Record Enable
Step 3
1. Click the Restore Strip Size
button for Track 1. This reveals
the input and output routing of
the track. The E-MU 0202 USB
2.0 will already be selected as the
Input
Output
Click
Here
output destination.
2. Select the input source by clicking on the small triangle on the input field. If
you wish to record a mono signal on the “A” input of the 0404 USB, select Left
ASIO E-MU 0202|USB Analog In A. To record both inputs in stereo select
Stereo ASIO E-MU 0202|USB Analog In A.
3. The Input Echo button should be OFF. You will be monitoring the input
through the E-MU 0202.
4. Press the Direct Monitor button on your E-MU 0202 USB 2.0. If you are
recording a mono track, set Direct Monitor to Mono by pressing the Direct
Monitor button again.
5. Press the Track Record Enable button for the track. (See the diagram on
the previous page.) The track turns a dull red color to indicate that it is recordenabled. You should now see activity on the Track Input Meter when feeding a
signal into the 0202 USB 2.0.
TIP . . .
If you don’t see meter
activity on the track, check
the Input for the track.
Make sure you are selecting
the proper input source.
0202 USB 2.0 Owner’s Manual 23
Page 24
Tutorials
Input Select
Output Select
6. If your input signal is either too weak or too strong, adjust the input level
control on the 0202 USB 2.0.
7. Optional Step - Metronome: First, select Toolbars from the View menu and
check the Metronome Toolbar. Next turn Metronome During Record On by
clicking the button.
Record a Track
8. Press Record on the Sonar LE Transport control and start playing.
TIP . . .
You can create a new track
by selecting Clone, from the
Track menu. This handy
feature duplicates the
currently selected track
complete with input/output
routings.
Stop
Return-To-Zero
Record
Play
9. Press Stop when you’re finished recording the first track.
10. Press Play on the Sonar LE Transport to play back your track.
11. If you want to dump the track and start over, Right-click over the waveform
display in the track and choose Delete.
Record Another Track
12. Select Track 2 and click the Restore Strip Size button to expose the input
and output routing.
13. Set the Input source for the track. Click on the little triangle on the right
side of the track Input box.
14. Disable record for Track 1 by clicking on the Track Record button Off.
15. Enable recording for Track 2 by clicking on the Track Record button On.
16. Press the transport Record button and you’re recording.
Hot Tip: A quick way to record additional tracks using the same input is to simply
drag the Part (audio region) you just recorded up or down to another track in the
Sonar Project Window, then just hit Record again and go. (Choose Blend Old and
New when asked in the Drag & Drop Options.)
Save your Project
17. Choose Save As… from the Sonar LE File menu to save your project. Choose a
name and location that will make the project easy to find later.
E-MU Systems 24
Page 25
Tutorials
3 - Recording a MIDI Track using Proteus VX
These instructions explain how to start Proteus VX from within Sonar LE. You’ll
need a MIDI interface and a MIDI keyboard (or other MIDI input device) for this
tutorial.
• Important: If Sonar was installed BEFORE Proteus VX VSTi, you will have to
run the Cakewalk VST Adapter before Sonar can use the VSTi. (Start,
Programs, Cakewalk, Cakewalk VST Adapter).
1. Connect the MIDI output of your MIDI keyboard to the MIDI input of your
MIDI interface.
Select the Virtual Instrument
2. Select Synth Rack from the View menu. The following window appears:
Click Here
3. Click on the
and select Proteus VX from the list of VST instruments. The following pop-up
dialog box appears.
+ symbol to add an instrument. Follow the path shown above
4. Select the default options (MIDI Source Track & First Synth Output) as shown.
Click OK to continue. (This may a take a few seconds.)
5. Proteus VX now appears in the Synth rack and two new tracks have been
added to the bottom of the track list. (You may have to scroll down to see the
new tracks.)
0202 USB 2.0 Owner’s Manual 25
Page 26
Tutorials
New Proteus VX Tracks
Audio Output from Proteus VX
MIDI input to Proteus VX
Click Here to view the strip controls.
The MIDI Connection
6. Select the blue MIDI Input track by clicking on it. The MIDI Input connection
appears in the strip to the left of the MIDI tracks.
MIDI Input Select
TIP . . .
Check the Sonar MIDI
Monitor in the SysTray to
verify that you’re receiving
MIDI.
7. Your MIDI Interface should already be selected as the MIDI input in Omni
mode as shown above. “MIDI Omni” allows Proteus VX VSTi to receive on all
16 MIDI channels from your MIDI keyboard. (Proteus VX VSTi is “multitimbral” and can assign a different preset to each of the 16 MIDI channels.)
8. Set the MIDI Channel for the track to
channel 1 as shown at right. This “rechannelizes” the incoming MIDI data on any
MIDI channel to channel 1.
Open Proteus VX
9. Double-click on the number (or on the Proteus VX name) to open the Proteus
VX editor.
Synth Rack with Proteus VX
Double-Click Here
to Open Proteus VX
E-MU Systems 26
Page 27
Tutorials
10. After a few seconds, the Proteus VX editor screen shown below appears.
Play the Proteus X Composer Bank.
11. Select the 16 channel tab. This page allows you to select presets for all 16 MIDI
channels.
16 Channel Tab
Select Preset
12. Select a preset for MIDI Channel 1 by clicking the little triangle.
13. Play your MIDI keyboard and verify that it plays Proteus VX.
14. Feel free to play around for awhile selecting presets and exploring Proteus VX.
Don’t worry about losing anything. Nothing is made permanent until you
Save the bank, so don’t worry and have fun.
0202 USB 2.0 Owner’s Manual 27
Page 28
Tutorials
To Record a M I D I Tr a c k
15. Minimize the Proteus VX window by pressing the minimize button .
16. Record-Enable the MIDI Track by pressing the track Record button (R). The
track turns a dull red color to indicate that it is record-enabled.
• Important: Be sure to turn Track Record Enable OFF for any tracks you don’t
want to record on, such as previsously recorded tracks.
Trac k Recor d Ena b l e
17. Press Record on the Sonar LE Transport control and start playing.
18. Press Stop when you’re finished recording the first track.
19. Press Play on the Sonar LE Transport to play back your track.
To Record a M I D I Tr a c k on another MIDI Channel
Proteus VX VSTi can play back up to 16 MIDI tracks at once. It’s much better to use
several channels on one VSTi than to use multiple VSTi’s with one channel each.
20. Select MIDI Track from the Insert menu.
21. Select the MIDI input for the new MIDI track. Select MIDI Omni as you did
before.
22. Select Proteus VX as the Output destination for the track.
23. Select MIDI Channel 2 in the Ch. field as shown below.
Input Select
Output Select
MIDI Ch. Select
Chan. 2
Selected
24. Restore Proteus VX by clicking on the Restore Up button on the minimized
Proteus FX window. Select a preset for channel 2 by clicking the little triangle
on channel 2 in the 1-16 channel view of Proteus VX.
25. Play your MIDI keyboard to listen to the presets during the selection process.
Click OK when you’ve made your selection.
26. Record Enable the track by pressing the Track Record Enable button . If
you want to record multiple tracks simultaneously, simply turn Record Enable
on for each track you wish to record.
27. Press Record on the Sonar LE Transport control and start playing.
28. Press Stop when you’re finished recording the second track.
On Your Own
Now that you’ve had a taste of what Proteus VX can do, please read the Proteus VX
Operation Manual PDF to learn all about this exceptional instrument.
Sonar LE also includes useful online documentation and help files to help you
learn about the features of this powerful program.
E-MU Systems 28
Page 29
Tutorials
Troubleshooting
Can’t hear Windows Media Player in Windows
If you have, or ever have had, another audio device installed in your PC, you may
have to set the E-MU 0202 USB 2.0 as the “Default Audio Device”.
1. Open the Control Panel, then select Sounds and Audio Devices.
2. Click the Audio tab and select the E-MU 0202 USB 2.0 as the Default device
under Sound Playback.
3. Click the Volume button under Sound Playback and turn up Wave volume.
You cannot record or monitor ASIO and WAVE at the same time. The first audio
application you open controls the E-MU 0202 USB 2.0.
Lost Communication
Should you lose communication between your E-MU 0202 and an audio application (Ableton Live, Cubase, Sonar, etc.), the E-MU 0202 USB 2.0 drivers may
need to be re-selected in your application.
1. Go to your application's I/O settings, de-select the E-MU 0202 USB 2.0 for
both input and output.
2. Apply these changes and exit the dialog.
3. Re-enter the application's preference settings and re-select the E-MU 0202 USB
2.0 drivers. If this doesn’t work, the application may need to be restarted.
Ground Loops
In digital audio devices and computers, audio ground loops may appear as pitched
tones, digital hash in the background, as well as the familiar 60 cycle hum.
Ground loops are caused by a difference in ground potential between two pieces of
equipment. Computer audio devices are particularly susceptible to ground loops
because most computers were not designed with high quality audio in mind.
The E-MU 0202 USB 2.0 contains built-in “ground lift” switches for both analog
inputs in order to safely break the loop if a ground loop occurs in your setup.
Input Ground Lifted
Input Grounded
The ground-lift switches are located on the bottom of the unit, close to the rear
panel. The input ground is lifted when the A or B slide switch is closest to the GND
LIFT label.
Pops & Crackles
Pops and crackling noises in the audio are most often caused by having the ASIO
Buffer Size set too low. Adding audio tracks and VST plug-ins increases the load on
your computer’s CPU. If your computer cannot keep up with all the tasks you are
asking it to perform, pops and crackles may occur. In effect, increasing the ASIO
buffer gives your computer “more time” to complete its assigned tasks. The
hardware Direct Monitor feature of the 0202 USB 2.0 allows you to increase the
ASIO Buffer setting without the associated latency problems during recording and
overdubbing.
USB hubs can create problems with digital audio and should be avoided whenever
possible.
A-GND LIFT
B-GND LIFT
0202 USB 2.0 Owner’s Manual 29
Page 30
Tutorials
Internet References
The internet contains vast resources for the computer musician. A few useful sites
are listed here, but there are plenty more. Check it out.
Software Updates, Tips & Tutorials . http://www.emu.com/support
Setting up a PC for Digital Audio .... http://www.musicxp.net
MIDI Basics.......................................... Search for “MIDI Basics” (many sites)
MIDI & Audio Recording................... http://www.midiworld.com
MIDI & Audio Recording................... http://www.synthzone.com
Sonar Users Group............................ http://www.cakewalknet.com/index.php
Cubase, ASIO & Digital Audio.......... http://www.steinberg.net
Cubase Users Group .......................... http://www.groups.yahoo.com/group/
cubase/messages
Forums
Unofficial E-MU Forum..................... http://www.productionforums.com/emu
Sound-On-Sound Forum .................. http://www.soundonsound.com
Computer Music Forum .................... http://www.computermusic.co.uk/main.asp
Home Recording Forum.................... http://homerecording.com/bbs
Studio Central Forum ........................ http://www.tweakheadz.com
KVR Forum .......................................... http://www.kvr-vst.com/forum/search.php
MIDI Addict Forum ........................... http://forum.midiaddict.com/search.php
Sound Card Benchmarking............... http://audio.rightmark.org
Driver Heaven Forum ........................ http://www.driverheaven.net
E-MU Systems 30
Page 31
Technical Specifications
TECHNICAL SPECIFICATIONS
General
Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192kHz from internal crystal
(no sample rate conversion)
Bit Depth: 24-bit I/O, 32-bit processing
USB 2.0 Hi-Speed
Full 24-bit resolution at all sample rates
2in/2 out channels
Zero-latency direct hardware monitoring
ASIO2, WDM MME
Anti-Pop speaker protection minimizes noise during power on/off
Ultra-low jitter clock subsystem
<500ps RMS in PLL mode (48kHz, Coaxial S/PDIF Sync)
Combo Microphone Preamplifier/Hi-Z/Line Input (1)
Type: Balanced E-MU XTC® combo mic preamplifier and Hi-Z/line input
A/D converter: AK5385A
Input Impedance: 2.5Kohms
Max Level: +6.6dBV (+8.8dBu)
EIN: (20Hz-20kHz, 150ohm, unweighted) -127dBu
Signal-to-Noise Ratio: (A-weighted, min gain) 113dB
THD+N: (1kHz at -1dBFS, min gain) -103dB (.0007%)
Gain Range: +60dB
Frequency Response: (min gain, 20Hz-20kHz) +0.0/-0.16dB
Stereo Crosstalk: (1kHz min gain, -1dBFS) < -110dB
Hi-Z/Line Input (1)
Input Impedance: 1Mohm
Max Level: +12dBV (14.2dBu)
Dynamic Range: (A-weighted, 1kHz, min gain) 113dB
Signal-to-Noise Ratio: (A-weighted, min gain) 113dB
THD+N: (1kHz at -1dBFS, min gain) -101dB (.0009%)
0202 USB 2.0 Owner’s Manual 31
Page 32
Technical Specifications
Analog Line Outputs (2)
Type: unbalanced, AC-coupled, 2-pole low-pass differential filter
D/A converter: CS4392
Level: Consumer: +6.8dBV max (unbalanced)
Frequency Response: (20Hz - 20kHz) 0.00/-.07dB
Dynamic Range: (1kHz, A-weighted) 112dB
Signal-to-Noise Ratio: (A-weighted) 112dB
THD+N: (1kHz at -1dBFS) -98dB (.0013%)
Stereo Crosstalk: (1kHz at -1dBFS) < -110 dB
Headphone Amplifier
Type: Class-A power amplifier
D/A converter: CS4392 (shared with Line Out)
Gain Range: 60dB
Maximum Output Power: 16mW
Output impedance: 22ohms
Frequency Response: (20Hz–20kHz) +0.02/-0.08dB
Dynamic Range: (A-weighted) 110dB
Signal-to-Noise Ratio: (A-weighted) 108dB
THD+N: (1kHz, max gain): 300ohm load -98dB (.0013%)
Stereo Crosstalk: (1kHz at -1dBFS, 300 ohm load) < -91dB
Dimensions / Weight
Weight: 0.94 lb / 0.43 kg
Dimensions:
W: 6.5” H: 2.0” L: 5.5”
W: 165 mm H: 50.8 mm L: 140 mm
E-MU Systems 32
Page 33
Index
INDEX
A
Add Track, Cubase LE
ASIO Buffer Latency
C
Clip Indicators
Computer Requirements
Connection Diagram
Control Panel
Cubase LE
project window
setting up
tutorial
D
Device Select, E-Control
Device Setup, Cubase LE
Devices
Devices Menu, Cubase LE
Direct Monitor Controls
Direct Monitoring
E
E-Control Application
E-MU ASIO
17
Cubase LE
Sonar LE
9
14
13
13
14
21
17, 19
14, 22
8, 10
13
11
9
12
11
6
13
13
L
Latency
Lost Communication
M
MIDI Channels, using multiple
MIDI Connection
MIDI Track
Monitor Button, Cubase LE
Multitrack Recording
O
Options Menu, Sonar LE
P
Package Contents
Pops & Crackles
Project Window, Cubase LE
Proteus VX
R
Recording a MIDI Track
Recording an Audio Track
12
29
Cubase LE
Sonar LE
recording in Cubase LE
recording in Sonar LE
Cubase LE
Sonar LE
18
26
15
23
21, 22
7
29
editor screen
using with Cubase LE
using with Sonar LE
Cubase LE
Sonar LE
into Cubase LE
into Sonar LE
27
17
25
17
25
15
23
19
28
15
13
19, 28
G
Gain Controls
Ground Lift Switches
Ground Loops
H
Headphone Level Control
Headphone Output
I
Inputs
Inspector, Cubase LE
0202 USB 2.0 Owner’s Manual 33
10
9
10, 29
29
9
10
18
S
Save Project, Sonar LE
Signal Level Indicators
Skin, selecting
Software Installation
Windows XP
Sonar LE
multitrack recording
project window
T
Technical Specifications
Track Record Enable Button, Sonar LE
Troubleshooting
11
24
9
7
23
23
31
29
23, 28
Page 34
Index
U
Uninstalling Drivers & App
USB Jack
V
VST Instruments
W
Windows Logo Testing Note
Windows Media Player, no audio
10
17
7
7
29
E-MU Systems 34
Loading...