EMBC-1S-C-1,EMBC-2S-C-1,EMBC-3S-C-1,EMBC-4S-C-1,EMBC-5S-C-1,EMBC-6S-C-1,EMBC-7S-C-1,EMBC-8S-C-1,EMBC-1S-DO-1,EMBC-2S-DO-1,EMBC-3S-DO-1,EMBC-4S-DO-1,EMBC-5S-DO-1,EMBC-6S-DO-1,EMBC-7S-DO-1,EMBC-8S-DO-1,EMBC-1S-O-1,EMBC-2S-O-1,EMBC-3S-O-1,EMBC-4S-O-1,EMBC-5S-O-1,EMBC-6S-O-1,EMBC-7S-O-1,EMBC-8S-O-1,EMBC-1S-UH-1,EMBC-2S-UH-1,EMBC-3S-UH-1,EMBC-4S-UH-1,EMBC-5S-UH-1,EMBC-6S-UH-1,EMBC-7S-UH-1,EMBC-8S-UH-1,EMBC-1S-UO-1,EMBC-2S-UO-1,EMBC-3S-UO-1,EMBC-4S-UO-1,EMBC-5S-UO-1,EMBC-6S-UO-1,EMBC-7S-UO-1,EMBC-8S-UO-1,EMBC-1S-W-1,EMBC-2S-W-1,EMBC-3S-W-1,EMBC-4S-W-1,EMBC-5S-W-1,EMBC-6S-W-1,EMBC-7S-W-1,EMBC-8S-W-1
Empire EMBC-1S-C-1,EMBC-2S-C-1,EMBC-3S-C-1,EMBC-4S-C-1,EMBC-5S-C-1,EMBC-6S-C-1,EMBC-7S-C-1,EMBC-8S-C-1,EMBC-1S-DO-1,EMBC-2S-DO-1,EMBC-3S-DO-1,EMBC-4S-DO-1,EMBC-5S-DO-1,EMBC-6S-DO-1,EMBC-7S-DO-1,EMBC-8S-DO-1,EMBC-1S-O-1,EMBC-2S-O-1,EMBC-3S-O-1,EMBC-4S-O-1,EMBC-5S-O-1,EMBC-6S-O-1,EMBC-7S-O-1,EMBC-8S-O-1,EMBC-1S-UH-1,EMBC-2S-UH-1,EMBC-3S-UH-1,EMBC-4S-UH-1,EMBC-5S-UH-1,EMBC-6S-UH-1,EMBC-7S-UH-1,EMBC-8S-UH-1,EMBC-1S-UO-1,EMBC-2S-UO-1,EMBC-3S-UO-1,EMBC-4S-UO-1,EMBC-5S-UO-1,EMBC-6S-UO-1,EMBC-7S-UO-1,EMBC-8S-UO-1,EMBC-1S-W-1,EMBC-2S-W-1,EMBC-3S-W-1,EMBC-4S-W-1,EMBC-5S-W-1,EMBC-6S-W-1,EMBC-7S-W-1,EMBC-8S-W-1 Installation Manual
Page 1
MANTEL ASSEMBLY INSTRUCTIONS
MOUNTING STRIP
MOUNTING STRIP
LEVEL
LEFT SIDE ASSEMBLY
BASE
EMBC-1S-(C,DO,O,UH,UO,W)-1 EMBC-2S-(C,DO,O,UH,UO,W)-1
EMBC-3S-(C,DO,O,UH,UO,W)-1 EMBC-4S-(C,DO,O,UH,UO,W)-1
EMBC-5S-(C,DO,O,UH,UO,W)-1 EMBC-6S-(C,DO,O,UH,UO,W)-1
EMBC-7S-(C,DO,O,UH,UO,W)-1 EMBC-8S-(C,DO,O,UH,UO,W)-1
CORNER CABINET MANTEL
EFFECTIVE DATE DECEMBER, 2005
INSTRUCTIONS MUST BE LEFT WITH THE OWNER FOR FUTURE REFERENCE AFTER INSTALLATION.
1. Place in desired location.
2. Position left side and right side assembly against base.
3. Attach mounting strips in corner with 2 1/2" screws level
mounting strips with left and right assembly.
Figure 1
4. Remove left side and right side assembly.
5. Place replace on base and route gas line to replace.
6. Position left side and right side assembly against base.
RIGHT SIDE ASSEMBLY
Figure 3
7. Position breast board assembly to the front of left side
and right side assembly.
BREAST BOARD
19726-3-0414 Page 1Empire Comfort Systems Inc. • 918 Freeburg Avenue • Belleville, IL 62220
Empire Comfort Systems, Inc. Nine Eighteen Freeburg Ave. Belleville, Illinois 62220-2623
Figure 2
Figure 4
Page 2
8. Use six (6) 1 1/4" screws to attach breast board assem-
(6)11/4” SCREWS
TOP TRIM
bly to left side and right side assembly.
Figure 5
9. Attach L bracket to top of rebox to secure mantel to
rebox.
“L” BRACKET
10. Place mantel top rear and mantel top front onto mounting strips, mantel sides, and breastboard.
TOP REAR
Figure 7
TOP FRONT
Figure 6
Figure 8
11. Cut top trim according to mantel size.
12. Attach top trim to mantel top with 1" nish nails.
13. Installation of corner mantel is complete.
Figure 9
19726-3-0414Page 2 Empire Comfort Systems Inc. • 918 Freeburg Avenue • Belleville, IL 62220
Loading...