Page 1
DIN RAIL MOUNTED ACTIVE TRACKING® FILTERS WITH SURGE PROTECTION
“MAXIMIZE PROTECTION”
Page 2
STFE ELITE SERIES ACTIVE TRACKING® FILTER WITH SURGE PROTECTION
Features
• Series connected DIN Rail mounted filter
• Patented durable metal mounting clip
UL Listed Surge current capacity – 45,000 Amps
• Transient protection in all modes
(L-N, L-G, and N-G)
• Single Phase applications up to 20 Amp
• Operating Temperature from -40°C to +50°C
• Screw Terminal Connections
– Reliable and convenient screw clamp connec-
tions
– Accept 10-16 AWG wire
– Meet IP20 specifications for ingress protection
• LED status indication
• Form C contact for remote monitoring
• UL 1449, UL 1283, cUL
recognized component, CE
• 5 Year Limited Warranty
Versatile applications
• Control Panels
• Factory Automation Installations
• Point of Use Industrial Equipment
• Programmable Logic Controllers
• Dedicated Industrial and Machine
Tools Equipment
aDVantaGes
e SolaHD STFE Elite DIN Rail Mount Series combines Active Tracking® technology with UL Listed surge
protection against the full spectrum of voltage transients and surges. It continuously tracks the input AC power
line responding instantly into action upon detecting extraneous high frequency noise and high voltage transients caused by everyday events such as turning on machinery, motors, or equipment. ey are designed for
years of trouble free operation and require little or no operator intervention after installation.
Page 3
HOW DO YOU PROTECT YOUR POWER?
Employing an entire facility protection strategy will safeguard the electrical system against most transients. Multi-stage
protection involves clamping the initial high-energy surge, filtering any remaining noise or transients to the protected
sensitive equipment and finally, protecting the data/signal lines entering or leaving the control panel or the factory floor.
This coordination of devices provides the lowest possible let through voltage to the equipment.
STV 100K
Surge Suppressor
Device (SPD)
Surge Suppressor
STV100k Series
1
LINE
SERVIC E
Distribution
Transformer
STV 200/400K
Service Entrance
Surge Protective Device
Surge Protective Device
STV200/400K Series
PROTECTION
FULL
1
MODULE
PROTECTION
2
MODULE
ALARM
DISABLED
TEST
2
LINE
REDUCED
B
STV 100K
Surge Protective
Device (SPD)
Surge Suppressor
2
LINE
STV100k Series
1
LINE
SERVICE
Surge Suppressor
2
LINE
STV100k Series
1
LINE
SERVICE
A
STC-PoE
Ethernet Surge
Protective Device
(located behind server)
S5K Modular UPS
K-Factor
Harmonic
Transformer
LVGP
Transformer
C
SDU Off-Line UPS
Solatron Plus
Three Phase
Power Conditioner
MCR Series
Constant Voltage
Power Conditioner
STC-DRS
DIN mounted
Surge Protective
Device For Data
Signals
4
5
6
LINE
LINE
SHIELD
1
2
3
D
STS -D RS -06 0
4
5
6
LINE
LINE
SHIELD
STS-DRS-060
1
2
3
OK
Active Tracking Filter
STF Elite Series
OK
Active Tracking Filter
STF Elite Series
L
L1
LOAD
Active Tracking Filter
STFV Plus Series
LINE
L
L1
N
L2
Status OK
N
L2
STF Elite
Active Tracking
Filter With
Surge Protection
G
G
STFV Plus Series
Surge Protection and
Active Tracking Filter
G
G
E
G
STC-CCTV
Surge Protective
Device For Coaxial
C
A
B
L
E
STC-CCTV-751
F
E
Q
U
I
P
A
STV200/400K: Surge protective devices capable of handling the
high-impulse, potentially damaging transients commonly found
at the service entrance, distribution panels, and placement in the
most severe exposure locations.
B
STV100K: Surge protective devices designed to protect sensitive
equipment and microprocessor-based systems from transients on
distribution and sub-distribution panels, or any medium exposure
locations.
C
STC-POE: Surge protective devices designed to work on
Power-over-Ethernet Category 5 PoE transmission lines as well as
Category 6 applications.
D
STC-DRS: DIN Rail mountable, single pair, low voltage data,
surge protective devices. e hybrid design of these data/signal line
suppressors allows them to respond quickly.
E
STFE Elite: DIN Rail Mountable high-frequency noise lter/
surge suppressors that oers the original active tracking technology with UL approved transient protection to guard against
commonly occurring, but very damaging transients, plus provides
excellent noise reduction.
F
STC-CCTV: Surge protective devices tailored to protect
CCTV, data, audio and cable applications.
G
STFV: High-frequency noise lter/surge suppressors that oers
the original active tracking technology with transient protection
to guard against commonly high voltage transients, plus provides
excellent noise reduction.
Page 4
Internal View
of Components
Rear View
STFE ELITE SERIES
Internal Diagram
DIN Connector
Strong all metal for
horizontal or vertical
mounting
Series Blocking Inductor
blocks voltage, smooths current
provides high-energy
MOV Array
all mode protection
Screw Terminal Connections
Green LED Unit Status Indicator
Silicone Avalanche Diodes
fast responding surge suppressor
Form C Relay Contacts
DC OK signal
Rear View
high-frequency noise absorption
Pulse Capacitor
Internal View of Components
Selection Table
Selection Table
Catalog
Number
STFE030-10N 120 V Single Phase 2 Wire + Ground 3.0 24 3A 3.75A
STFE050-10N 120 V Single Phase 2 Wire + Ground 5.0 22 5A 6.25A
STFE100-10N 120 V Single Phase 2 Wire + Ground 10.0 20 10A 12.5A
STFE200-10N 120 V Single Phase 2 Wire + Ground 20.0 12 20A 25A
STFE030-24L 240 V Single Phase 2 Wire + Ground 3.0 24 3A 3.75A
STFE050-24L 240 V Single Phase 2 Wire + Ground 5.0 22 5A 6.25A
Input Voltage Amps
Min Wire Size*
(AWG Suggested)
Fuse/Circuit Breaker Ampacity
Suggest Max
STFE100-24L 240 V Single Phase 2 Wire + Ground 10.0 20 10A 12.5A
STFE200-24L 240 V Single Phase 2 Wire + Ground 20.0 12 20A 25A
* 16 AWG wire or larger may be required by code dependent upon application.
For a full listing of SolaHD’s Filters and Surge Suppressors,
visit our website at www.solahd.com or consult our full line catalog.
Page 5
Technical Specications
CATALOG NUMBER
DESCRIPTION
Input Voltage 120 V 0150 VRMS 240 V (0-275 VRMS)
Line Frequency 47-63 Hz
Response Time < .5 ns normal mode, <5 ns common mode
Enclosure Fully Enclosed Metal Housing
Fusing Reference Fuse/Circuit Breaker Chart
Status Indication
Connection/Mounting Type DIN Rail Mount
Weight (Kg) 1.7 lbs (0.7kg)
Dimensions in (mm)
H x W x D
Operating Temperature
Operating Humidity 0% to 95% Non-condensing
Per Phase 30,000 Amps
Peak Surge Current
Capability
Load Surge Current Rating
Frequency Response
Normal Mode
(Forward-Reverse)
Common Mode
(Forward-Reverse)
Transient Reduction
(IEEE C62.41)
L-N 330 V 330 V N/A N/A
L-L N/A N/A 600 V 600 V
L-G 500 V 400 V 1000 V 900 V
N-G 400 V 400 V N/A N/A
Safety UL 1449, UL1283, cUL Recognized Component, CE
Warranty 5 Year Limited Warranty
Line to Neutral 20,000 Amps
Line to Ground 10,000 Amps
Neutral to Ground 10,000 Amps
10m Sec 5 x Nominal
1 sec 3 x Nominal
10 sec 2 x Nominal
100 kHz to 50 MHz 90 dB Max
5 MHz to 50 MHz 60 dB Max
Typical Category A Ringwave
(6 kV, 200A, 100 kHz)
Typical Category B Ringwave
(6 kV, 500A, 100 kHz)
120 V, 3-5A Models 120 V, 10-20A Models 240 V, 3-5A Models 240 V, 10-20A Models
STFEXXX-10N STFEXXX-24L
INPUT
PHYSICAL
Green LED “OK”/Form C Contact/
10 Amps@ 250 Vac or 5 Amps@ 100 Vdc
4.88 x 2.56 x 4.56
(124 x 65 x 116)
ENVIRONMENT
-40°C to +50°C at full load
Derate Linearly to 60% at +70ºC
SURGE PROTECTION
ACTIVE TRACKING PROTECTION
<60 V Peak
<100 V Peak UL 1449
UL 1449 (2nd EDITION) SUPPRESSOR CLASSIFICATION
GENERAL
Page 6
SolaHD is our line of premium power
conversion and power quality brands. Our
proven technologies power and protect
throughout your facility for improved operational eciency and productivity.
Emerson Industrial Automation brings
integrated manufacturing solutions to
diverse industries worldwide. Our
comprehensive product line, extensive
experience, world-class engineering and
global presence enable us to implement
solutions that give our customers the
competitive edge.
EGS is organized into three focused
businesses that provide distributors
and end-users expert knowledge and
excellent service.
Electrical Construction Materials
is group manufactures a broad range
of electrical products including conduit
and cable ttings, plugs and receptacles,
enclosures and controls, conduit bodies,
and industrial lighting. Whether the
application is hazardous location, industrial,
or commercial, the ECM group has the
products to meet your needs.
Electrical Construction Materials
Power Quality Solutions
Heating Cable Systems
For over 150 years, our electrical product
brands have been providing a rich
tradition of long-term, practical, high
quality solutions with applications ranging
from the construction and safe operation
of petrochemical and process plants to
providing quality power that precisely
controls automotive robotic production.
Engineers, distributors, contractors,
electricians and site maintenance
professionals around the world trust
Emerson Industrial Automation brands
to make electrical installations safer,
more productive and more reliable.
EGS Electrical Group
9377 W. Higgins Road
Rosemont, IL 60018
1.800.377.4384
www.solahd.com
Power Quality Solutions
is group oers the broadest power
quality line including UPS, power
conditioners, voltage regulators, shielded
transformers, surge suppression devices
and power supplies.
Heating Cable Systems
is group oers a broad range of electri cal
heating cable products for residential,
commercial, and industrial applications.
Canada
888.765.2226
Latin America
52.55.5366-6180 x125
Asia/Pacific
65.6745.0114
China
86.21.54260668 x305
Middle East
971.4.8838.831
Europe
33.1.4817.8502
The SolaHD and Emerson logos are registered in the U.S. Patent and Trademark Ofce.
All other product or service names are the property of their registered owners.
© 2008 EGS Electrical Group. All rights reserved.
Loading...