Emerson RP3228SL, RP3228 User Manual

Rechargeable Flashlight
with AM/FM/TV Sound,
Instant Weather Radio,
Digital Alarm Clock,
and Night Light

OWNER'S MANUAL

RP3 228 (Black)
RP3 228SL (Silver)

Visit our web site at www.emersonradio.com

RP3228_030205.p65 2/3/2005, 10:3323

!

CAUTION

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrow­head symbol, within an equi­lateral triangle is intended to
alert the user to the presence
of uninsulated ‘dangerous voltage’
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.

WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BAC K), NO USER
SERVICEABLE PARTS INSIDE
REFER SERVICING TO
Q U A LI F IE D S E RV I CE
PERSONNEL.

The exclamation point within
an equilateral triangle is in­tended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in
the literature accompany­ing the appliance.

IMPORTANT SAFETY INSTRUCTIONS

1.) Read these instructions.

2.) Keep these instructions.

3.) Heed all warnings.

4.) Follow all instructions.

5.) Do not use this apparatus near water.

6.) Clean only with dry cloth.

7.) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.

8.) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

9.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.

11.) Only use attachments / accessories specified by the manufacturer.

12.) Unplug this apparatus during lightning storms or when unused for long periods of time.

13.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.

14.) This appliance shall not be exposed to dripping or splashing water and no object filled with
liquids such as vases shall be placed on the apparatus.

15.) Do not overload wall outlet. Use only power source as indicated.

16.) Use replacement parts as specified by the manufacturer.

17.) The product may be mounted to a wall only if recommended by the manufacturer.

18.) Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks.

1

RP3228_030205.p65 4/3/2005, 17:411

IMPORTANT!
CONNECT THIS UNIT TO AN AC OUTLET
FOR 24 HOURS TO FULLY CHARGE THE

BATTERIES BEFORE FIRST USE

Thank You………………
For purchasing this Emerson multi-function rechargeable flashlight/radio

combination. This unique device is designed for connection directly to your
household AC outlet, and it includes a built-in rechargeable Ni-Cad battery pack
so that it is always ready to use in case of a power failure. Not only does it provide
you with an emergency light source but it also has a built-in radio that receives AM
and FM broadcasts, the sound from VHF TV channels 2-13, plus continuous U.S.
Government weather information for your geographic area, 24 hours a day, at the
touch of a button. There’s even a built-in digital alarm clock with lighted liquid
crystal display, and a night light that switches ‘On’ and ‘Off’ automatically according
to you room light conditions.

Our engineers have included many useful features in this Emerson
flashlight radio combination. Please be sure to read this owner’s manual completely
and carefully, to make sure you fully understand the operation of this product, and
that you get the maximum benefit from all the features we have included.

We have taken great care to insure that this product was in perfect working order
when it left our factory. After reading this manual, if you have any difficulty with the
operation of this product, please do not return it to the dealer or retail store. Please
contact the Emerson Customer Service Hotline, toll free, at 1-800-898-9020.

The hours of operation are 8:00 AM to 5:00 PM (Central Time) Monday through
Friday. One of our service technicians will try to correct the problem for you. If that
is not possible you will be advised how to obtain repair service or a replacement
unit.

Once again, thanks for purchasing this Emerson Audio Product.

Model No: RP3228/RP3228SL
Serial No:

2

RP3228_030205.p65 2/3/2005, 10:322

IMPORTANT NOTES

• Operate controls and switches as
described in the manual.

• Avoid installing this unit in places
exposed to direct sunlight or close to
heat radiating appliances such as

NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modific ations to this equipment. Such modifications
could void the User's authority to operate the equipment.

electric heaters, on top of other stereo
equipment that radiates too much
heat, places lacking ventilation or
dusty areas, places subject to constant
vibration and/or humid or moist areas.

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection agains t harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference

that may cause undesired operation.

3

RP3228_030205.p65 2/3/2005, 10:323

PREPARATION FOR USE

IMPORTANT!
This flashlight/radio has built in rechargeable Ni-Cd batteries. The
batteries were fully charged when they were installed in the unit at our
factory. However, when not connected to an AC outlet the batteries will
slowly discharge even though the unit is not being used. We suggest
that you connect this unit to your AC outlet and allow it to charge for 24
hours, or at least over-night, before you use it.

When the built in batteries are fully charged you can expect approximately
5 hours of flashlight operation, or 7 hours of radio operation at medium
volume level. Of course if you are using the flashlight and the radio
simultaneously the operating time of each function will be reduced.

Connecting To An AC Outlet

Before using this unit for the first time it should be connected to a “live” AC outlet
and allowed to charge for 24 hours. We suggest that you do not connect this unit to
an AC outlet that is connected to a wall switch. To insure that the unit is always fully
charged and ready to use it should be connected to an AC outlet that is always
“live”.

For fas ter charging time make sure that the flashlight switch is set to the ‘OFF’
position and that the radio On/OFF-VOLUME control is also in the ‘OFF’ position.
Turn this control fully counter-clockwise until a ‘click’ is heard to insure that it is off.

TOP VIEWFRONT VIEW

ON

OFF

4

RP3228_030205.p65 2/3/2005, 10:324

To connect this unit to your AC outlet unfold the built-in AC plug located on the
bottom cabinet as shown and connect to your outlet.

Note: This device has a polarized plug and can only be
connected to a normal polarized residential/household
polarized outlet with the wider slot on the left side. This
is a safety feature.

When properly connected to the outlet the flashlight will
be facing upward toward the ceiling and the nightlight
will be facing downward toward the floor.

5

RP3228_030205.p65 2/3/2005, 10:325

ON

AC Outlet

Power Source

This device is designed to operate on normal 120V 60Hz AC power only. Do not
attempt to operate the radio on any other power source. You could cause damage
to the device that is not covered by your warranty.

If the plug will not fit, you may have an older non-polarized AC outlet. Do not defeat
the safety feature by trying to file the wider blade, or replacing the plug. Contact an
electrician to replace your outdated outlet.

AC Plug

6

RP3228_030205.p65 2/3/2005, 10:326