Emerson PrPMC800 User Manual

PrPMC800 Series

High-Performance Processor PMC

The Emerson PrPMC800
series processor PCI
mezzanine card (PMC) is
the ideal solution when
time-to-market and flexibil­ity are important.

MPC7410 PowerPC®

°

microprocessor

AltiVec technology

°

Latest high-performance

°

PowerPlus III Architecture

2MB/1MB of L2 cache

°

Up to 512MB on-board

°

ECC SDRAM

32MB on-board ash

°

72-bit ECC memory

°

controller ASIC

Single-wide PMC with a

°

66/33 MHz PCI interface

Optional 10/100BaseT

°

Ethernet interface

64-bit PCI host bridge

°

One asynchronous serial

°

debug port

Hardware DMA channel

°

Four 32-bit timers

°

Two watchdog timers

°

The Emerson PrPMC800 series processor PCI mezzanine card (PMC) is the ideal

solution when time-to-market and exibility are important. In addition to the

highlighted features, this PMC module also includes a full-length heatsink, creating

a CPU package capable of handling the thermal requirements of complex tasks.

Processor PMC (PrPMC) modules provide a complete host CPU and memory subsys­tem to a base board full of PCI-based I/O controllers in a compact, rugged, industry

standard form factor. The PrPMC isolates the complexities of a high-speed CPU, cache
and memory signals from application-specic hardware, enabling OEMs to focus
on their market requirements while simplifying their product release. These modules

also simplify CPU and memory upgrades in performance-driven embedded and

telecom applications.

EIA232

Planar

Base Board

PCI Bus – A32/D64-bit

66/33 MHz

64

10/100 Base T

PMC Interface to

Base Board

Pn4

Pn3

Pn2

Pn1

Ethernet

PCI Bridge and

Memory Controller

PowerPC Bus – A32/D64-bit

ECC DRAM

Up to 512MB

Flash
32MB

L2 Cache

2/1MB

MPC7410

processor

COM1

I2C Serial
EEPROM

PrPMC800 Block Diagram

2

Specications

PROCESSOR

Microprocessor: MPC7410 class

°

Clock Frequency: 400 – 500 MHz

°

On-chip Cache (I/D): 32KB/32KB

°

L2 Cache: 1MB – 2MB

°

Cache Bus Clock Frequency: 180 MHz – 225 MHz

°

MEMORY

ECC Protected Main Memory: PC100 SDRAM

°

On-board Capacity: Up to 512MB

°

Single Cycle Accesses: 10 read/5 write

°

Read Burst Mode: 8-1-1-1 idle; 3-1-1-1 aligned

°

page hit (CL3)

Write Burst Mode: 4-1-1-1 idle; 3-1-1-1 aligned

°

page hit

User I2C Serial EEPROM: 8KB

°

°

EEPROM/Flash: 32MB surface mount (on-board
programmable), up to 512MB addressable on
carrier (optional)

SYNCHRONOUS SERIAL PORT

Controller: 16C550 compatible

°

Number of Ports: One

°

Conguration: DTE

°

Async Baud Rate, b/s max.: 38.4K EIA-232,

°

115Kb/s raw

IEEE P1386.1 INTERFACE

Address/Data: A32/D32/D64, PMC Pn1, Pn2, Pn3,

°

Pn4 connectors

PCI Bus Clock: 33 MHz or 66/33 MHz capable

°

Signaling: 3.3V output; VIO input

°

Power: +3.3V

°

Height: 13.5 mm from top of carrier board

°

(one slot)

Module Type: Single-wide

°

ETHERNET

Controller: Intel® 82559ER/82551IT

°

PCI Bus Master: 33 MHz with PCI burst

°

Connector: Models congured for Ethernet routing

°

via Pn4 do not have a front bezel.

COUNTERS/TIMERS

Real-Time Timers/Counters: Four 32-bit

°

programmable

Watchdog Timers: Two, time-out generates

°

interrupt or reset

MISCELLANEOUS

Reset, Abort and JTAG/COP via on-board debug

°

connector

Two planar LEDs for Fail and CPU active

°

POWER REQUIREMENTS

(AltiVec disabled)

+ 3.3V ± 5% @ 20° C

PrPMC8005E-12xx: 3.3 A typical, 3.9 A
maximum

PrPMC8005E-13xx: 4.1 A typical, 4.5 A
maximum

VIO: PCI buffer diode clamping
voltage

DEMONSTRATED MTBF

(based on a sample of eight boards in accelerated

stress environment.)

Mean: 190,509 hours

°

95% Condence: 107,681 hours

°

ENVIRONMENTAL

Operating Non-operating

Temperature: 0° C to +55° C,

forced air
cooling

Humidity (NC): 5% to 85% 5% to 95%

Vibration: 1.0 G sine

sweep, 5.0

to 100 Hz, 25
octaves/min

0.5 G sine sweep;
50-500 Hz; 0.1
octaves/min 3.0 G

sine sweep; 5-50 Hz;

0.25 octaves/min

ELECTROMAGNETIC COMPATIBILITY (EMC)

Intended for use in systems meeting the following

°

regulations:

U.S.: FCC Part 15, Subpart B, Class A (non-residen-

Å

tial)

Canada: ICES-003, Class A (non-residential)

Å

This product was tested in a representative system

°

to the following standards:

CE Mark per European EMC Directive 89/336/EEC

Å

with Amendments; Emissions: EN55022 Class B;
Immunity: EN50082-1

SAFETY

All printed wiring boards (PWBs) are manufactured

with a ammability rating of 94V-0 by UL recognized
manufacturers.

3

Ordering Information

Part Number Description

33 MHz PCI, Front Ethernet

PRPMC8005E-1261 450 MHz MPC7410, 256MB ECC SDRAM

33 MHz PCI, Rear Ethernet

PRPMC8005E-1259 450 MHz MPC7410, 128MB ECC SDRAM

PRPMC8005E-1269 450 MHz MPC7410, 256MB ECC SDRAM

66 MHz PCI, No Ethernet

PRPMC8005E-2261 450 MHz MPC7410, 256MB ECC SDRAM

PRPMC8005E-2271 450 MHz MPC7410, 512MB ECC SDRAM

Note: Additional PrPMC800 series models may be available; contact your local sales representative.

Documentation

PPMC800A/IH PrPMC800 Installation and Use manual

PPMC800A/PG PrPMC800 Programmer’s Reference Guide

SOLUTION SERVICES

Emerson Network Power provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed
time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh. Plus solution
extras include enhanced warranty and repairs.

PowerPC is a trademark of IBM Corp. and used under license. Intel is a registered trademark of Intel Corporation or its subsidiaries in the U.S. and other countries. All other product or service names are
the property of their respective owners.

This document identies products, their specications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future
availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should
exercise its own independent judgment to conrm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or
information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit
described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network
Power’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations.

Emerson Network Power.

The global leader in enabling
Business-Critical Continuity™.

AC Power Systems
Connectivity
DC Power Systems

Embedded Computing

Embedded Power
Integrated Cabinet Solutions
Outside Plant
Power Switching & Control

Emerson Network Power

Offices: Tempe, AZ U.S.A. 1 800 759 1107 or [phone] Madison, WI U.S.A. 1 800 356 9602 or [phone]

Shanghai, China [phone] Paris, France [phone] Tokyo, Japan [phone]
Munich, Germany [phone] Hong Kong, China [phone] Tel Aviv, Israel [phone]

www.EmersonNetworkPower.com/EmbeddedComputing

Business-Critical Continuity, Emerson Network Power and

the Emerson Network Power logo are trademarks and

Precision Cooling
Services
Site Monitoring
Surge & Signal Protection

service marks of Emerson Electric Co.

©2008 Emerson Electric Co.

PrPMC800-D1 2/08