MCA Menu Tree MCA Display (Lines 1 and 2 Section 5886
Identify Unit
Changeable Parameter
Color Code:
a = amps
v = volts
t = temperature
h = hours
m = minutes
s = seconds
d = day of the month
mon = month
y = year
# = substituted number or text
A# = alarm function number
B# = bay number
I# = binary input number
P# = position number
ID# = PCU (Rectifier) MCA identification
number
N# = Total number of PCUs (Rectifiers)
in the system
SN# = PCU (Rectifier) serial number
R# = relay number
A/B = A (group A, jumper on) or
B (group B, jumper off) or
space (all jumpers on)
C/F = C (Celsius) or
F (Fahrenheit)
F/CB/PI = FUSE or
BREAKER or
PLUG-IN or MISC 50-73
<CONDITION> = FLOAT or
TEST/EQ or
HV SHUTDOWN or
HIGH RANGE or
LOW RANGE or
MAX. COMP. or
MIN. COMP.
/_ = (condition is selected) or
space (condition not selected)
/ = (alarms were present) or
(no alarms present)
Key:
Navigation Key Codes
(displays in 4th Line
as a User navigates the
MCA Menu Tree).
alarm cutoff
information
available
increment
decrement
yes
no
up
down
right
left
enter
alarm cutoff/
enter together
yes/no together
i
+
Y
N
E
±
Identify Unit,
Changeable Parameter
Line 1 of the MCA Display when No Alarms are Present.
SYSTEM OK, NO ALARMS
EMERGENCY STOP INPUT ACTIVE
HI VOLTAGE SHUTDOWN INPUT ACTIVE
SYSTEM VOLTAGE IS VERY LOW
SYSTEM BATTERY IS ON DISCHARGE
SYSTEM HIGH VOLTAGE #1 ALARM
SYSTEM HIGH VOLTAGE #2 ALARM
1 SYSTEM BREAKER OR FUSE ALARM
or
### SYSTEM BREAKER & FUSE ALARMS
AC POWER IS OFF TO ALL PCUs
1 PCU HAS FAILED
or
### PCUs HAVE FAILED
or
NO PCUs ARE IN INVENTORY
1 DIST. PANEL HAS FAILED
or
## DIST. PANELS HAVE FAILED
or
NO DIST. PANELS ARE IN INVENTORY
1 ROUTER HAS FAILED
or
## ROUTERS HAVE FAILED
or
NO ROUTERS ARE IN INVENTORY
1 RELAY BOARD HAS FAILED
or
## RELAY BOARDS HAVE FAILED
or
NO RELAY BOARDS ARE IN INVENTORY
HIGH TEMPERATURE #1 ALARM
HIGH TEMPERATURE #2 ALARM
LOW TEMPERATURE #1 ALARM
LOW TEMPERATURE #2 ALARM
TEMPERATURE SENSOR NO SIGNAL
MAJOR MONITORING ALARM(S)
or
Monitoring Major LED Messages
MINOR MONITORING ALARM(S)
or
Monitoring Minor LED Messages
MONITORING INFORMATION
or
Monitoring Info LED Messages
MONITORING DOES NOT RESPOND
CONTROLLER FAILURE ####
TOTAL LOAD CURRENT ALARM
DISTRIBUTION GROUP A LOAD ALARM
DISTRIBUTION GROUP B LOAD ALARM
THE DISPLAY DOES NOT RESPOND
101
100
99
97
96
95
94
93
92
91
90
89
88
78
66
40
12
11
7
6
5
4
3
2
1
Line 2 of the MCA Display.
System Output Voltage and System Output
Current.
vv.vvV aaaaaA
or
any of the following messages as a
User navigates the MCA Menu tree.
CHANGES ARE DISABLED
CHANGE THE VARIABLE
RELAY FUNCTION A#
ARE YOU SURE?
Line 1 of the MCA Display when Alarms are
Present.
(1 or more of the following Alarm Messages display.
If more than 1 alarm conditions are present, Alarm
Messages continuously scroll across the display.)
THE CONTROLLER IS INITIALIZING98
102
<CONDITION> LIMITED
WARNING: TOTAL POWER
LOSS IS POSSIBLE. GO
AHEAD ANYWAY?
Text displayed before changing
Test High Voltage Shutdown
value.
Text displayed while changing
a value.
Text displayed while storing a
value.
Text displayed if local changes
are disabled.
Text displayed if value cannot
be changed further.
Text displayed while in Relay
Function Definition Menu.
Black indicates text that
does not change.
Red indicates places
where the MCA substitutes
a fixed number or text
string.
Blue indicates places
where the MCA substitutes
a number or text string that
can be scrolled through
different values.
1 I/O BOARD HAS FAILED
or
## I/O BOARDS HAVE FAILED
or
NO I/O BOARDS ARE IN INVENTORY
55
ALTERNATE CURRENT LIMIT ACTIVE2A
(MCA Software Version 2.3.0.5) and Misc. Information) Issue AF, October 25, 2011
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Page 1 of 7
Section 5886 MCA Control MCA Menu Tree
TASK
KEY OR KEY COMBINATIONS
NOTES
Getting to Home Position
YES / + / i and NO / -
YES / + / i
NO / -
At any level in the MCA menus,
pressing YES / + / i and NO / -
simultaneously takes you back to the
beginning of the MCA menu tree.
Moving from One Menu
to Another Menu
ENTER
ENTER / /
You can travel left to right from one
menu to another by pressing ENTER.
You can also go back to a specified
menu by pressing ENTER while the
menu's name is being displayed.
Moving Within a Menu
UP ARROW, DOWN ARROW
Up
Down
FUNCTION
SELECT
Press UP ARROW to move up the list
of available entries in the active menu.
Press DOWN ARROW to move down
the list of available entries in the active
menu.
Changing a Value or Setting
Entering the
Adjustment/Change
Setting Mode
Changing the
Value or Setting
Locking the Change
Confirming the Change
ENTER and ALARM CUTOFF
ALARM
CUTOFF
ENTER / /
YES / + / i and NO / -
YES / + / i
NO / -
ENTER
ENTER / /
YES / + / i and NO / -
YES / + / i
NO / -
Changing a value or setting requires
four (4) steps.
1. With the current value or setting
being displayed, simultaneously
press ENTER and ALARM
CUTOFF.
2. To increase the value or change
the setting, press YES / + / i. To
decrease the value or change the
setting, press NO / -.
3. With the correct value or setting
being displayed, press ENTER.
4. To accept the change, at the
"ARE YOU SURE?" prompt press
YES / + / i. To reject the change,
at the "ARE YOU SURE?" prompt
press NO / -.
Changing a Control Function
Entering the
Adjustment/Change
Setting Mode
Confirming the Change
ENTER and ALARM CUTOFF
ALARM
CUTOFF
ENTER / /
YES / + / i and NO / -
YES / + / i
NO / -
Changing a control function requires
two (2) steps.
1. With the control function menu
item being displayed,
simultaneously press ENTER and
ALARM CUTOFF.
2. To accept the change, at the
"ARE YOU SURE?" prompt press
the YES / + / i. To reject the
change, at the "ARE YOU
SURE?" prompt press NO / -.
Issue AF, October 25, 2011 Keypad Functions (MCA Software Version 2.3.0.5)
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Page 2 of 7
TEST EQUALIZE IS DISABLED
or
MANUAL TEST/EQUALIZE
= hh HOURS
or
TEST/EQUALIZE STOP
IS MANUAL
PCU CURRENT LIMIT
= aaaaaA
EMERGENCY STOP
INPUT ACTIVE
HI VOLTAGE SHUTDOWN
INPUT ACTIVE
SYSTEM VOLTAGE IS
VERY LOW
SYSTEM BATTERY IS ON
DISCHARGE
SYSTEM HIGH VOLTAGE
#1 ALARM
SYSTEM HIGH VOLTAGE
#2 ALARM
1 SYSTEM BREAKER OR
FUSE ALARM
or
### SYSTEM BREAKER &
FUSE ALARMS
AC POWER IS OFF TO
ALL PCUs
1 PCU
HAS FAILED
or
### PCUs
HAVE FAILED
or
NO PCUs ARE
IN INVENTORY
1 DIST. PANEL
HAS FAILED
or
## DIST. PANELS
HAVE FAILED
or
NO DIST. PANELS ARE
IN INVENTORY
1 ROUTER
HAS FAILED
or
## ROUTERS
HAVE FAILED
or
NO ROUTERS ARE
IN INVENTORY
1 RELAY BOARD
HAS FAILED
or
## RELAY BOARDS
HAVE FAILED
or
NO RELAY BOARDS ARE
IN INVENTORY
HIGH TEMPERATURE #1
ALARM
HIGH TEMPERATURE #2
ALARM
LOW TEMPERATURE #1
ALARM
LOW TEMPERATURE #2
ALARM
TEMPERATURE SENSOR
NO SIGNAL
MAJOR MONITORING
ALARM(S)
or
Monitoring Major
LED Messages
MINOR MONITORING
ALARM(S)
or
Monitoring Minor
LED Messages
MONITORING
INFORMATION
or
Monitoring Info
LED Messages
MONITORING DOES NOT
RESPOND
CONTROLLER FAILURE
####
TOTAL LOAD CURRENT
ALARM
DISTRIBUTION GROUP A
LOAD ALARM
DISTRIBUTION GROUP B
LOAD ALARM
THE DISPLAY DOES NOT
RESPOND
GO TO FUNCTION MENU
GO BACK TO MENU TREE
BEGINNING
NORMAL DISPLAY MENU
104
103
101
100
99
97
96
95
94
93
92
91
90
89
88
78
66
40
12
11
7
6
5
4
3
2
1
A
to
(Sheet 2 of 4)
FUSE ALARM MENU
F/CB/PI B#-P#A/B
IS OPEN
GO TO MAIN ALARM
MENU
GO BACK TO MENU TREE
BEGINNING
8
9
10
PCU B#-ID#/N#
FAILURE
GO BACK TO MENU TREE
BEGINNING
PCU ALARM MENU
13
14
15
DIST. PANEL B#-P#A/B
FAILURE
GO TO MAIN ALARM
MENU
GO BACK TO MENU TREE
BEGINNING
41
42
43
DISTRIBUTION ALARM MENU
ROUTER B#
FAILURE
GO TO MAIN ALARM
MENU
GO BACK TO MENU TREE
BEGINNING
67
68
69
RELAY BOARD B#-P#
FAILURE
GO TO MAIN ALARM
MENU
GO BACK TO MENU TREE
BEGINNING
79
80
81
ROUTER ALARM MENU
RELAY ALARM MENU
PCU ALARM DETAIL MENU
PCU B#-ID#/N#
EMERG. STOP
PCU B#-ID#/N#
H.V. SHUTDOWN
PCU B#-ID#/N#
AC LINE LOW
PCU B#-ID#/N#
AC LINE HIGH
PCU B#-ID#/N#
AC PHASE LOST
PCU B#-ID#/N#
POWER FACTOR
PCU B#-ID#/N#
DC/DC CONV.
PCU B#-ID#/N#
FUSE/BREAKER
PCU B#-ID#/N#
INHIBITED
PCU B#-ID#/N#
ON STANDBY
PCU B#-ID#/N#
THERMAL LIMIT
PCU B#-ID#/N#
THERMAL STOP
PCU B#-ID#/N#
HIGH AMBIENT
PCU B#-ID#/N#
1 FAN SPEED
PCU B#-ID#/N#
NO VOLT SENSE
PCU B#-ID#/N#
AC LINE OFF
PCU B#-ID#/N#
NO RESPONSE
GO TO PCU ALARM MENU
GO BACK TO MENU TREE
BEGINNING
DISTRIBUTION ALARM DETAIL MENU
DIST. PANEL B#-P#A/B
DISCONNECTED
or
DIST. PANEL B#-P#A/B
RECONNECT?
POSITION B#-P#A/B
TYPE UNKNOWN
F/CB/PI B#-P#A/B
OVER CURRENT
DIST. PANEL B#-P#A/B
LVD FAILURE
DIST. PANEL B#-P#A/B
A/B CHANGED
DIST. PANEL B#-P#A/B
PROCESSOR
DIST. PANEL B#-P#A/B
NO RESPONSE
GO TO DISTRIBUTION
ALARM MENU
GO BACK TO MENU TREE
BEGINNING
ROUTER ALARM DETAIL MENU
ROUTER B# REMOTE
SENSE OPEN
ROUTER B# INTERNAL
SENSE OPEN
ROUTER B# PROCESSOR
ROUTER B#
NO RESPONSE
GO TO ROUTER ALARM
MENU
GO BACK TO MENU TREE
BEGINNING
RELAY ALARM DETAIL MENU
RELAY B#-P#-R# IS
STUCK
RELAY BOARD B#-P#
PROCESSOR
RELAY BOARD B#-P#
NO RESPONSE
GO TO RELAY ALARM
MENU
GO BACK TO MENU TREE
BEGINNING
18
19
22
23
24
25
26
27
28
29
30
31
32
33
34
36
37
38
39
45
46
47
48
49
50
51
52
53
54
70
73
74
75
76
77
82
84
85
86
87
GO TO MAIN ALARM
MENU
INITIALIZATION MENU
############ WAIT ##
V###########
CHECK VALUES BEFORE
STARTING
FLOAT SETPOINT
= vv.vvV
TEST/EQUALIZE
= vv.vvV
HI VOLTAGE SHUTDOWN
= vv.vvV
SYSTEM HI VOLTAGE #1
= vv.vvV
SYSTEM HI VOLTAGE #2
= vv.vvV
BATTERY ON DISCHARGE
= vv.vvV
VERY LOW VOLTAGE
= vv.vvV
TOTAL LOAD CURRENT
= aaaaaA
DISTRIBUTION GROUP A
= aaaaaA
DISTRIBUTION GROUP B
= aaaaaA
HIGH TEMPERATURE #1
= ttt°C/F
or
NO HIGH TEMPERATURE
#1 ALARM
MAXIMUM COMPENSATION
= vv.vvV
MINIMUM COMPENSATION
= vv.vvV
READY TO START THE
SYSTEM NOW?
HIGH TEMPERATURE #2
= ttt°C/F
or
NO HIGH TEMPERATURE
#2 ALARM
LOW TEMPERATURE #2
= ttt°C/F
or
NO LOW TEMPERATURE
#2 ALARM
AUDIBLE SILENT TIME
= mm MINUTES
or
AUDIBLE ALARMS STAY
SILENCED
AUTO EQUALIZE IS
DISABLED
or
AUTO EQUALIZE FOR ##
x DISCHARGE
NO TEMPERATURE
COMPENSATION
or
TEMPERATURE SLOPE
= 0.vvvV/ °C/F
LOW TEMPERATURE #1
= ttt°C/F
or
NO LOW TEMPERATURE
#1 ALARM
A
B
C
D
E
F
G
H
I
J
K
L
M
O
P
Q
R
T
U
V
W
X
Y
The User navigates Lines 3 and 4 of the MCA Display using the Keypad on the MCA Control Panel.
(The following indicates the actual text shown on each line of Lines 3 and 4 of the MCA Display, Line
4 also displays applicable navigation key codes, see previous page for explanation of codes.)
MAIN ALARM MENU
THE CONTROLLER IS
INITIALIZING
98
N
102
PCU B#-ID#/N#
2+ FANS SPEED
35
POSITION B#-P#A/B
NOT FOUND
or
POSITION NOT FOUND
PANEL B#-P#A/B
IT IS NOW hh:mm:ss
dd-mon-yy
Z
RELAY BOARD B#-P# IS
DUPLICATED
ROUTER B# REPORTS AN
ILLEGAL NODE
ROUTER B# IS
DUPLICATED
DIST. PANEL B#-P#A/B IS
DUPLICATED
PCU B#-ID#/N#
DUPLICATED
PCU B#-ID#/N#
LOAD SHARE
ALARM LIMIT vv.vvV
NOW AT vv.vvV
ALARM LIMIT ttt°C/F
NOW AT ttt°C/F
ALARM LIMIT aaaaaA
NOW AT aaaaaA
3A, 4A, 5A, 6A
21
20
44
71
72
83
88A, 89A, 90A, 91A
99A, 100A, 101A
PCU SEQUENCING IS
DISABLED
or
PCU SEQUENCING DELAY
= ss SECONDS
S
1 I/O BOARD
HAS FAILED
or
## I/O BOARDS
HAVE FAILED
or
NO I/O BOARDS ARE
IN INVENTORY
55
I/O BOARD B#-P#
FAILURE
GO TO MAIN ALARM
MENU
GO BACK TO MENU TREE
BEGINNING
56
57
58
I/O BOARD ALARM MENU
I/O BOARD ALARM DETAIL MENU
I/O BOARD B#-P#
OVER CURRENT
I/O BOARD B#-P#
PROCESSOR
I/O BOARD B#-P#
NO RESPONSE
GO TO I/O BOARD
ALARM MENU
GO BACK TO MENU TREE
BEGINNING
60
62
63
64
65
I/O BOARD B#-P# IS
DUPLICATED
61
Binary Input Customer
Text Messages
59
or
REPLACE ### PCUs?
AUTO IN ###
### REMOTE PCUS
HAVE FAILED
1 REMOTE PCU
HAS FAILED
16
17
ALTERNATE CURRENT
LIMIT ACTIVE
2A
or
PCU CURRENT LIMIT
POWER SHARE
or
PCU CURRENT LIMIT
ALT. LIMIT
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATIVE
CURRENT LIMIT
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATIVE
CURRENT LIMIT
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATIVE
CURRENT LIMIT
MCA Menu Tree MCA Display (Lines 3 and 4) Section 5886
(MCA Software Version 2.3.0.5) (Sheet 1 of 4) Issue AF, October 25, 2011
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Page 3 of 7
Section 5886 MCA Display (Lines 3 and 4) MCA Menu Tree
FLOAT MODE IS ACTIVE
SET TEST/EQ?
or
TEST/EQ MODE ACTIVE
SET FLOAT?
VIEW THE SYSTEM
MEASUREMENTS
VIEW THE SYSTEM
INVENTORY
134
133
105
A
from
(Sheet 1 of 4)
DISTRIBUTION LOAD DETAIL MENU
F/CB/PI B#-P#A/B
LOAD aaaaaA
GO TO DISTRIBUTION
LOAD MENU
GO BACK TO MENU TREE
BEGINNING
DISTRIBUTION INVENTORY DETAIL MENU
POINT B#-P#A/B IS A
F/CB/PI
122
123
124
148
B
to
(Sheet 3 of 4)
ROUTER VOLTAGE MENU
ROUTER B# INTERNAL
SENSE vv.vvV
GO TO MEASUREMENT
MENU
GO BACK TO MENU TREE
BEGINNING
108
109
110
SYSTEM LOAD MENU
112
113
115
PCU CURRENT MENU
PCU B#-ID#/N#
aaaaaA
GO TO MEASUREMENT
MENU
GO BACK TO MENU TREE
BEGINNING
126
129
PCU INVENTORY MENU
PCU B#-ID#/N#
RATED aaaaaA
GO TO INVENTORY MENU
GO BACK TO MENU TREE
BEGINNING
137
138
151
DISTRIBUTION INVENTORY MENU
PANEL B#-P#A/B INCLUDES
1 POINT
or
PANEL B#-P#A/B INCLUDES
## POINTS
GO BACK TO MENU TREE
BEGINNING
152
162
RELAY INVENTORY MENU
RELAY BOARD B#-P# IS
INSTALLED
183
MEASUREMENT MENU
SYSTEM OUTPUT SENSE
vv.vvV (REM)
or
SYSTEM OUTPUT SENSE
vv.vvV (AVG)
TOTAL SYSTEM
LOAD aaaaaA
TOTAL PCU OUTPUT
aaaaaA
or
TOTAL PCU/RECTIFIER
aaaaaA
TEMPERATURE SENSOR
ttt°C/F
GO TO FUNCTION MENU
GO BACK TO MENU TREE
BEGINNING
106
111
125
130
131
132
INVENTORY MENU
1 PCU IS
REPORTING
or
### PCUs ARE
REPORTING
or
NO PCUs ARE
INSTALLED
1 DIST. PANEL IS
REPORTING
or
## DIST. PANELS ARE
REPORTING
or
NO DIST. PANELS ARE
INSTALLED
1 ROUTER IS
REPORTING
or
## ROUTERS ARE
REPORTING
or
NO ROUTERS ARE
INSTALLED
1 RELAY BOARD IS
REPORTING
or
## RELAY BOARDS ARE
REPORTING
or
NO RELAY BOARDS ARE
INSTALLED
TEMPERATURE SENSOR
REPORTING
or
NO TEMPERATURE
SENSOR
MONITORING IS
REPORTING
or
NO MONITORING IS
INSTALLED
SENSE VOLTAGE IS
REMOTE INPUT
or
SENSE VOLTAGE IS
AVERAGED
UPDATE THE INVENTORY
GO TO FUNCTION MENU
GO BACK TO MENU TREE
BEGINNING
212
211
210
199
192
191
181
171
150
135
GO TO INVENTORY MENU
153
ROUTER INVENTORY MENU
ROUTER B# IS
INSTALLED
GO BACK TO MENU TREE
BEGINNING
173
GO TO INVENTORY MENU
184
GO BACK TO MENU TREE
BEGINNING
182
GO TO INVENTORY MENU
174
or
TEST/EQUALIZE INPUT
IS ACTIVE
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATE
CURRENT LIMIT
ROUTER B# REMOTE
SENSE vv.vvV
107
200
B#-ID#/N# ASSY.
#####################
141
B#-ID#/N# SERIAL
#####################
B#-ID#/N# BOOT
#####################
B#-ID#/N# SW VER
#####################
PANEL B#-P#A/B ASSEMBLY
############
PANEL B#-P#A/B SERIAL #
############
PANEL B#-P#A/B BOOTCODE
############
PANEL B#-P#A/B SOFTWARE
############
PCU INVENTORY DETAIL MENU
ROUTER B# ASSEMBLY
############
ROUTER B# SERIAL #
############
ROUTER B# BOOTCODE
############
ROUTER B# SOFTWARE
############
ROUTER INVENTORY DETAIL MENU
BOARD B#-P# ASSEMBLY
############
BOARD B#-P# SERIAL #
############
BOARD B#-P# BOOTCODE
############
BOARD B#-P# SOFTWARE
############
RELAY INVENTORY DETAIL MENU
MONITORING ASSEMBLY
#####################
195
196
MONITORING BOOTCODE
#####################
MONITORING SOFTWARE
#####################
MONITORING INVENTORY DETAIL MENU
154
155
156
170
175
176
177
180
185
186
186
193
139
140
149
FUNCTION MENU
(cont'd on next page)
CONTROLLER ASSEMBLY
############
MONITORING SERIAL #
#####################
194
PSC B#-ID# ASSEMBLY
#####################
142
145
PSC B#-ID# SERIAL #
#####################
PSC B#-ID# BOOTCODE
#####################
PSC B#-ID# SOFTWARE
#####################
143
144
203
CONTROLLER SERIAL #
#####################
CONTROLLER BOOTCODE
#####################
CONTROLLER SOFTWARE
#####################
CONTROLLER INVENTORY DETAIL MENU
201
202
DISPLAY ASSEMBLY
#####################
204
206
DISPLAY SERIAL #
#####################
DISPLAY BOOTCODE
#####################
DISPLAY SOFTWARE
#####################
205
207
GO BACK TO MENU TREE
BEGINNING
209
GO TO INVENTORY MENU
208
GO BACK TO MENU TREE
BEGINNING
198
GO TO INVENTORY MENU
197
GO TO RELAY BOARD
INVENTORY
GO BACK TO MENU TREE
BEGINNING
188
189
GO TO ROUTER
INVENTORY
GO BACK TO MENU TREE
BEGINNING
178
179
GO TO DISTRIBUTION
INVENTORY
GO BACK TO MENU TREE
BEGINNING
157
158
GO TO PCU
INVENTORY
GO BACK TO MENU TREE
BEGINNING
146
147
1 I/O BOARD IS
REPORTING
or
## I/O BOARDS ARE
REPORTING
or
NO I/O BOARDS ARE
INSTALLED
161
I/O BOARD INVENTORY MENU
I/O BOARD B#-P# IS
INSTALLED
163
GO BACK TO MENU TREE
BEGINNING
172
GO TO INVENTORY MENU
164
I/O BOARD INVENTORY DETAIL MENU
BOARD B#-P# ASSEMBLY
############
BOARD B#-P# SERIAL #
############
BOARD B#-P# BOOTCODE
############
BOARD B#-P# SOFTWARE
############
160
165
166
167
GO TO I/O BOARD
INVENTORY
GO BACK TO MENU TREE
BEGINNING
168
169
or
TOTAL PCU POSITIONS
= ###
1 PCU POSITION
IS EMPTY
or
### PCU POSITIONS
ARE EMPTY
or
NO PCU POSITIONS
ARE EMPTY
RECTIFIER OUTPUT
aaaaaA
127
TOTAL DISTRIBUTION
LOAD aaaaaA
or
TOTAL AUXILIARY
LOAD aaaaaA
DISTRIBUTION GROUP A
LOAD aaaaaA
DISTRIBUTION GROUP B
LOAD aaaaaA
114
116
117
DISTRIBUTION LOAD MENU
DIST. PANEL B#-P#A/B
LOAD aaaaaA
GO TO SYSTEM LOAD
MENU
GO BACK TO MENU TREE
BEGINNING
I/O BOARD B#-P#
LOAD aaaaaA
REMOTE SYSTEM
LOAD aaaaaA
GO TO MEASUREMENT
MENU
GO BACK TO MENU TREE
BEGINNING
128
136
118
119
120
121
159
190
Issue AF, October 25, 2011 (Sheet 2 of 4) (MCA Software Version 2.3.0.5)
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Page 4 of 7
ADJUST THE SYSTEM
VOLTS & AMPS
FUNCTION MENU
(cont'd from previous page)
VERIFY TEST, ESTOP,
& HVS INPUTS
or
TEST SHUTDOWN INPUT
IS ON
or
EMERGENCY STOP INPUT
IS ON
or
HI VOLTAGE SHUTDOWN
INPUT IS ON
323
213
B
from
(Sheet 2 of 3)
CONFIGURE MENU
AUDIBLE SILENT TIME
= mm MINUTES
or
AUDIBLE ALARMS STAY
SILENCED
251
RELAY FUNCTION MENU
DEFINE RELAY
FUNCTION A#
GO TO CONFIGURE MENU
GO BACK TO MENU TREE
BEGINNING
256
257
258
RELAY ASSIGNMENT MENU
ASSIGN RELAY B#-P#-R#
FUNCTION A#
GO TO CONFIGURE MENU
GO BACK TO MENU TREE
BEGINNING
312
313
314
ADJUST THE ALARM
SETPOINTS
225
TURN PCUs ON OR OFF239
CHANGE CONFIGURATION
PARAMETERS
243
GO BACK TO MENU TREE
BEGINNING
438
253
254
DEFINE RELAY
FUNCTIONS
255
310
ASSIGN RELAYS TO
FUNCTIONS
311
315
ERASE THE ALARM LOG
318
GO TO FUNCTION MENU
GO BACK TO MENU TREE
BEGINNING
322A
320
PCU ENABLE MENU
PCU B#-ID#/N# ON
TURN IT OFF?
or
PCU B#-ID#/N# OFF
TURN IT ON?
GO TO FUNCTION MENU
GO BACK TO MENU TREE
BEGINNING
240
241
242
MINIMUM COMPENSATION
= vv.vvV
MAXIMUM COMPENSATION
= vv.vvV
316
317
NOW DISPLAYING °C/F
SET TO °C/F?
IT IS NOW hh:mm:ss
dd-mon-yy
PCU B#-ID#/N#
RECOGNIZED
or
DSM B#-P#A/B
RECOGNIZED
or
I/O B#-P#
RECOGNIZED
or
CRM B#
RECOGNIZED
or
RCB B#-P#
RECOGNIZED
319
321
437
VIEW THE ALARM LOG324
C
to
(Sheet 4 of 4)
PCU SEQUENCING IS
DISABLED
or
PCU SEQUENCING DELAY
= ss SECONDS
252
CHANGE I/O BOARD
PARAMETERS
244
I/O BOARD
CONFIGURATION MENU
ANALOG INPUT B#-P# IS
DISTRIBUTION
or
ANALOG INPUT B#-P# IS
AUXILIARY
245
ANALOG INPUT B#-P#
50mV = aaaaaA
246
ANALOG OUTPUT B#-P#
50mV = aaaaaA
247
BINARY INPUT B#-P#-I#
ALARM = CLOSED
or
BINARY INPUT B#-P#-I#
ALARM = OPEN
248
GO TO CONFIGURE MENU
GO BACK TO MENU TREE
BEGINNING
249
250
START RELAY FUNCTION
TEST
or
TIME PER FUNCTION
= hh:mm:ss
or
TIME PER FUNCTION
NO TIMEOUT
or
AUTOMATICALLY TEST
ALL FUNCTIONS
or
TEST RELAY FUNCTION
A#
or
STOP RELAY FUNCTION
TEST
or
TESTING FUNCTION A#
= hh:mm:ss
or
TESTING FUNCTION A#
NO TIMEOUT
CHANGE NETWORK
ADDRESSES
320A
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATIVE
CURRENT LIMIT
ARRANGE PCU ORDER
RELAY FUNCTION DEFINITION MENU
CHECKED CONDITIONS
DE-ENERGIZE
or
CHECKED CONDITIONS
ENERGIZE
259
/_EMERGENCY STOP
INPUT ACTIVE
260
/_HI VOLTAGE SHUTDOWN
INPUT ACTIVE
261
/_SYSTEM VOLTAGE IS
VERY LOW
262
/_SYSTEM BATTERY ON
DISCHARGE
263
/_SYSTEM HIGH VOLTAGE
#1 ALARM
264
/_SYSTEM HIGH VOLTAGE
#2 ALARM
265
/_1 SYSTEM BREAKER OR
FUSE ALARM
266
/_2+ SYSTEM BREAKER &
FUSE ALARMS
267
/_AC POWER IS OFF TO
1 PCU
268
/_AC POWER IS OFF TO
2+ PCUs
269
/_AC POWER IS OFF TO
ALL PCUs
270
/_1 PCU FAILURE
ANY TYPE
271
/_2+ PCU FAILURES
ANY TYPE
272
/_1 PCU FAILURE
'MAJOR' TYPE
273
/_2+ PCU FAILURES
'MAJOR' TYPE
274
/_1 PCU FAILURE
'MINOR' TYPE
275
/_2+ PCU FAILURES
'MINOR' TYPE
276
/_NO PCUs ARE
IN INVENTORY
277
/_1 DIST. PANEL
FAILURE
278
/_2+ DIST. PANEL
FAILURES
279
/_NO DIST. PANELS
IN INVENTORY
280
/_1 ROUTER FAILURE284
/_NO ROUTERS ARE
IN INVENTORY
286
/_1 RELAY BOARD
FAILURE
287
/_2+ RELAY BOARD
FAILURES
288
/_NO RELAY BOARDS ARE
IN INVENTORY
289
/_HIGH TEMPERATURE #1
ALARM
290
/_HIGH TEMPERATURE #2
ALARM
291
/_LOW TEMPERATURE #1
ALARM
292
/_LOW TEMPERATURE #2
ALARM
293
/_TEMPERATURE SENSOR
NO SIGNAL
294
/_MAJOR MONITORING
ALARM(S)
295
/_MINOR MONITORING
ALARM(S)
296
/_All Monitoring LED
Messages
297
/_MONITORING DOES NOT
RESPOND
298
/_CONTROLLER FAILURE299
/_THE CONTROLLER IS
INITIALIZING
300
/_TOTAL LOAD CURRENT
ALARM
301
/_DIST. GROUP A
LOAD ALARM
302
/_DIST. GROUP B
LOAD ALARM
303
/_THE DISPLAY DOES
NOT RESPOND
304
/_TEST/EQUALIZE MODE
IS ACTIVE
305
/_THE AUDIBLE ALARM
IS ACTIVE
306
GO TO RELAY FUNCTION
MENU
308
GO BACK TO MENU TREE
BEGINNING
309
/_2+ ROUTER FAILURES
285
/_AUDIBLE ALARMS ARE
SILENCED
307
/_1 I/O BOARD
FAILURE
281
/_2+ I/O BOARD
FAILURES
282
/_NO I/O BOARDS ARE
IN INVENTORY
283
/_ALTERNATE CURRENT
LIMIT ACTIVE
261A
VALIDATE THE ADDRESS
CHANGES?
or
UPDATE/RESTART LMS
WITH CHANGES?
or
THE CHANGES WERE
REJECTED
###.###.###.###
GATEWAY
320E
###.###.###.###
NET MASK
320D
###.###.###.###
IP ADDRESS
320C
##.##.##.##.##
MAC ADDRESS
320B
GO TO CONFIGURE MENU
GO BACK TO MENU TREE
BEGINNING
320F
320G
320H
NETWORK ADDRESS MENU
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATIVE
CURRENT LIMIT
NO TEMPERATURE
COMPENSATION
or
TEMPERATURE SLOPE
= 0.vvvV/°C/F
322
TEST EQUALIZE IS DISABLED
or
MANUAL TEST/EQUALIZE
= hh HOURS
or
TEST/EQUALIZE STOP
IS MANUAL
or
END TEST/EQUALIZE IN
hh.hh HOURS
AUTO EQUALIZE IS
DISABLED
or
AUTO EQUALIZE FOR ##
x DISCHARGE
or
END AUTO EQUALIZE IN
hhh.hh HOURS
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATIVE
CURRENT LIMIT
PCU CURRENT LIMIT
= aaaaaA
TEST H.V. SHUTDOWN
= vv.vvV
LOSS IS POSSIBLE. GO
AHEAD ANYWAY?
POWER SHARE IS OFF
TURN IT ON?
or
POWER SHARE IS ON
TURN IT OFF?
or
ALT. LIMIT IS OFF
TURN IT ON?
or
ALT. LIMIT IS ON
TURN IT OFF?
100% PCU CURRENT IS
aaaaaA
GO TO FUNCTION MENU
GO BACK TO MENU TREE
BEGINNING
222
223
224
SYSTEM ADJUSTMENT MENU
FLOAT SETPOINT
= vv.vvV
TEST/EQUALIZE
= vv.vvV
HI VOLTAGE SHUTDOWN
= vv.vvV
215
219
220
221
214
PS INITIAL CAPACITY
LIMIT = ###%
PS VOLTAGE OFFSET
= v.vV
216
217
218
ALTERNATE CURRENT
LIMIT = ###%
218A
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATIVE
CURRENT LIMIT
or
TURN OFF TEMPERATURE
COMPENSATION
or
PCU CURRENT LIMIT
ALT. LIMIT
or
PCU CURRENT LIMIT
POWER SHARE
321E
321F
321G
321D
GO TO CONFIGURE MENU
GO BACK TO MENU TREE
BEGINNING
SN# IN SLOT
POSITION ##
or
DUPLICATE MAPPING
DETECTED
SAVE PCU MAPPING
ALARM ADJUSTMENT MENU
SYSTEM HI VOLTAGE #1
= vv.vvV
HIGH TEMPERATURE #1
= ttt°C/F
or
NO HIGH TEMPERATURE
#1 ALARM
GO TO FUNCTION MENU
GO BACK TO MENU TREE
BEGINNING
238
232
235
SYSTEM HI VOLTAGE #2
= vv.vvV
226
BATTERY ON DISCHARGE
= vv.vvV
227
VERY LOW VOLTAGE
= vv.vvV
228
TOTAL LOAD CURRENT
= aaaaaA
229
DISTRIBUTION GROUP A
= aaaaaA
230
DISTRIBUTION GROUP B
= aaaaaA
231
HIGH TEMPERATURE #2
= ttt°C/F
or
NO HIGH TEMPERATURE
#2 ALARM
233
LOW TEMPERATURE #1
= ttt°C/F
or
NO LOW TEMPERATURE
#1 ALARM
234
LOW TEMPERATURE #2
= ttt°C/F
or
NO LOW TEMPERATURE
#2 ALARM
236
237
G
(This sheet)
PCU MAPPING MENU
(NS702/801 ONLY)
BAY ##
GO TO CONFIGURE MENU
GO BACK TO MENU TREE
BEGINNING
321A
321B
321C
to
from
F
(This sheet)
to
D
(This sheet)
E
(This sheet)
from
D
(This sheet)
from
to
E
(This sheet)
F
(This sheet)
from
to
G
(This sheet)
MCA Menu Tree MCA Display (Lines 3 and 4) Section 5886
(MCA Software Version 2.3.0.5) (Sheet 3 of 4) Issue AF, October 25, 2011
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Page 5 of 7
Section 5886 MCA Display (Lines 3 and 4) MCA Menu Tree
dd-mon-yy hh:mm:ss /
CONTROLLER
ALARM LOG MENU
400
325
E
from
(Sheet 3 of 5)
356
384
425
GO TO FUNCTION MENU
GO BACK TO MENU TREE
BEGINNING
dd-mon-yy hh:mm:ss /
B#-SN#
dd-mon-yy hh:mm:ss /
PANEL B#-P#A/B
dd-mon-yy hh:mm:ss /
ROUTER B#
dd-mon-yy hh:mm:ss /
RELAY B#-P#
SYSTEM CONTROLLER
NO ALARMS
326
EMERGENCY STOP
INPUT ACTIVE
327
HI VOLTAGE SHUTDOWN
INPUT ACTIVE
328
SYSTEM VOLTAGE IS
VERY LOW
329
SYSTEM BATTERY IS ON
DISCHARGE
330
SYSTEM HIGH VOLTAGE
#1 ALARM
331
SYSTEM HIGH VOLTAGE
#2 ALARM
332
NO PCUs ARE
IN INVENTORY
333
NO DIST. PANELS ARE
IN INVENTORY
334
NO ROUTERS ARE
IN INVENTORY
335
NO RELAY BOARDS ARE
IN INVENTORY
336
HIGH TEMPERATURE #1
ALARM
337
MCA ALARM
LOG DETAIL MENU
GO TO ALARM LOG MENU
GO BACK TO MENU TREE
BEGINNING
HIGH TEMPERATURE #2
ALARM
338
LOW TEMPERATURE #1
ALARM
339
LOW TEMPERATURE #2
ALARM
340
TEMPERATURE SENSOR
NO SIGNAL
341
MAJOR MONITORING
ALARM(S)
342
MINOR MONITORING
ALARM(S)
343
Monitoring LED
Messages
344
MONITORING DOES NOT
RESPOND
345
CONTROLLER FAILURE
####
346
THE CONTROLLER IS
INITIALIZING
347
TOTAL LOAD CURRENT
ALARM
348
GROUP A LOAD CURRENT
ALARM
349
GROUP B LOAD CURRENT
ALARM
350
THE DISPLAY DOES NOT
RESPOND
351
SYSTEM OUTPUT SENSE
vv.vvV
352
TOTAL LOAD CURRENT
aaaaaA
353
PCU B#-SN#
NO ALARMS
357
PCU B#-SN#
EMERG. STOP
358
PCU B#-SN#
H.V. SHUTDOWN
359
PCU B#-SN#
AC LINE OFF
360
PCU B#-SN#
AC LINE LOW
361
PCU B#-SN#
AC LINE HIGH
362
PCU B#-SN#
AC PHASE LOST
363
PCU B#-SN#
POWER FACTOR
364
PCU B#-SN#
DC/DC CONV.
365
PCU B#-SN#
FUSE/BREAKER
366
PCU B#-SN#
INHIBITED
367
PCU B#-SN#
ON STANDBY
368
PCU ALARM
LOG DETAIL MENU
GO TO ALARM LOG MENU
GO BACK TO MENU TREE
BEGINNING
PCU B#-SN#
THERMAL LIMIT
369
PCU B#-SN#
THERMAL STOP
370
PCU B#-SN#
HIGH AMBIENT
371
PCU B#-SN#
LOAD SHARE
372
PCU B#-SN#
1 FAN SPEED
373
PCU B#-SN#
2+ FANS SPEED
374
PCU B#-SN#
NO VOLT SENSE
375
PCU B#-SN#
DUPLICATED
376
PCU B#-SN#
NO RESPONSE
377
PCU B#-SN#
TURNED ON
or
PCU B#-SN#
TURNED OFF
378
PCU B#-SN#
aaaaaA
379
SYSTEM OUTPUT SENSE
vv.vvV
380
TOTAL LOAD CURRENT
aaaaaA
381
GO TO ALARM LOG MENU
GO BACK TO MENU TREE
BEGINNING
DIST. PANEL B#-P#A/B
A/B CHANGED
392
DIST. PANEL B#-P#A/B
PROCESSOR
393
DIST. PANEL B#-P#A/B IS
DUPLICATED
394
DIST. PANEL B#-P#A/B
NO RESPONSE
395
SYSTEM OUTPUT SENSE
vv.vvV
396
TOTAL LOAD CURRENT
aaaaaA
397
DIST. PANEL B#-P#A/B
NO ALARMS
385
DIST. PANEL B#-P#A/B
DISCONNECTED
386
POSITION B#-P#A/B
IS OPEN
387
POSITION B#-P#A/B
NOT FOUND
or
POSITION NOT FOUND
PANEL B#-P#A/B
388
POSITION B#-P#A/B
TYPE UNKNOWN
389
POSITION B#-P#A/B
OVER CURRENT
391
DIST. PANEL B#-P#A/B
LVD FAILURE
391
DISTRIBUTION ALARM
LOG DETAIL MENU
GO TO ALARM LOG MENU
GO BACK TO MENU TREE
BEGINNING
ROUTER B# IS
DUPLICATED
417
ROUTER B# DOES NOT
RESPOND
418
ROUTER B# REMOTE
SENSE vv.vvV
419
ROUTER B# INTERNAL
SENSE vv.vvV
420
SYSTEM OUTPUT SENSE
vv.vvV
421
TOTAL LOAD CURRENT
aaaaaA
422
ROUTER B#
NO ALARMS
412
413
ROUTER B# INTERNAL
SENSE OPEN
414
ROUTER B# PROCESSOR
FAILURE
415
ROUTER B# REPORTS AN
ILLEGAL NODE
416
ROUTER B# REMOTE
SENSE OPEN
ROUTER ALARM
LOG DETAIL MENU
SYSTEM OUTPUT SENSE
vv.vvV
431
TOTAL LOAD CURRENT
aaaaaA
432
RELAY BOARD B#-P#
NO ALARMS
426
427
RELAY BOARD B#-P#
PROCESSOR
428
RELAY BOARD B#-P# IS
DUPLICATED
429
RELAY BOARD B#-P#
NO RESPONSE
430
RELAY B#-P#-R# IS
STUCK
RELAY ALARM
LOG DETAIL MENU
GO TO ALARM LOG MENU
GO BACK TO MENU TREE
BEGINNING
355
354
383
382
398
399
423
424
433
434
435
436
dd-mon-yy hh:mm:ss /
I/O B#-P#
411
GO TO ALARM LOG MENU
GO BACK TO MENU TREE
BEGINNING
I/O BOARD B#-P#
NO RESPONSE
406
SYSTEM OUTPUT SENSE
vv.vvV
407
TOTAL LOAD CURRENT
aaaaaA
408
I/O BOARD B#-P#
NO ALARMS
401
402
I/O BOARD B#-P#
OVER CURRENT
403
I/O BOARD B#-P#
PROCESSOR
404
I/O BOARD B#-P#
IS DUPLICATED
405
I/O BOARD B#-P#
BINARY I#
I/O BOARD ALARM
LOG DETAIL MENU
409
410
ALTERNATE CURRENT
LIMIT ACTIVE
328A
BAY ### REPLACE PCU B#-P#
REPLACE PCU B#-P# W/
SN#
PCU REPLACEMENT
MENU
REPLACE ### PCUs?
AUTO IN ###
REPLACE ### PCUs
MANUALLY?
REPOPULATE ### SLOTS?
AUTO IN ### ?
MANUAL PCU
REPLACEMENT MENU
(NS702/801 only)
439
444
440
441 442 443
Issue AF, October 25, 2011 (Sheet 4 of 4) (MCA Software Version 2.3.0.5)
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Page 6 of 7
MCA Menu Tree Section 5886
Issue
Change
Number
(ECO)
Description of Change
AA
LLP035201
New
AB
LLP203036
Updated for MCA version 1.2.0.1
AC
LLP210933
Updated for MCA version 2.0.0.21 (relay test feature enhanced, Power Share
feature added [legacy rectifier interface], support for 582140001 added).
AD
LLP212061
Updated for MCA Version 2.1.0.4 (System Load Menu Added, PCU/Rectifier
MCA Identification Changed)
AE
LLP213082
Updates for MCA version 2.2.0.6.
AF
LLP214855
Updated for MCA Version 2.3.0.5 (PCU mapping menu added).
Emerson Network Power, Energy Systems, North America, Inc.
4350 Weaver Parkway, Warrenville, IL 60555
Toll Free: 800-800-1280 (USA and Canada)
Telephone: 440-246-6999 Fax: 440-246-4876
Web: EmersonNetworkPower.com/EnergySystems
EnergyNet: Secure.EmersonNetworkPower.com
(MCA Software Version 2.3.0.5) Issue AF, October 25, 2011
REVISION RECORD
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Page 7 of 7
Loading...