Emerson Hd70021, Hd70050, Hd70020 Owner's Manual

Part No. SP6470 Printed in Canada

CAUTION: Read all instructions carefully before installation.

Save this Owner’s Manual for future reference.

Moist

AIR™HD7002 & HD7005

Evaporative Console
Humidifier Owner’s Manual

EMERSON

®

Model Nos. HD7002 1 & HD7005 0

Safety Signal Words

DANGER: means if the safety information is

not followed, someone will be seriously
injured or killed.
WARNING: means if the safety information
is not followed, someone could be serious­ly injured or killed.
CAUTION: means if the safety information
is not followed, someone may be seriously
injured or killed.

1. To reduce the risk of fire or shock haz­ard, plug humidifier directly into a 120V,
A.C. electrical outlet. Do not use exten­sion cords.

2. Keep the electric cord out of traffic
areas. To reduce the risk of fire hazard,
never put the electric cord under rugs,
near heat registers, radiators, stoves or
heaters.

3. Always unplug the humidifier before
moving it, before cleaning, or whenever
the humidifier is not in service.

4. Keep the humidifier clean.

5. Do not put foreign objects inside the
humidifier.

6. Never use your humidifier while any
part is missing or damaged in any man­ner.

7. To reduce the risk of electrical hazard or
damage to humidifier, do not tilt, jolt or
tip humidifier while unit is running.

8. To reduce the risk of damage to humid­ifier, unplug humidifier, when water bot­tle is empty or when the humidifier is
not in use.

9. To reduce the risk of accidental electri­cal shock, do not touch the cord or con­trols with wet hands.

10. Note the warning label shown.

WARNING: To reduce risk of fire, elec­tric shock, or injury always unplug
before filling, servicing or cleaning.

GENERAL SAFETY INSTRUCTIONS

Limited Warranty

All products covered by this Owner’s Manual are warranted against defects in workman­ship and materials for one year from the date of sale except for motors, which are war­ranted for two years. This warranty does not apply to damage from accident, misuse or
alteration nor where the connected voltage is more than 5% above the nameplate volt­age, nor to equipment improperly installed or wired or maintained in violation of this
Owner’s Manual. No other written or oral warranty applies. No employee, agent, dealer
or other person is authorized to give any warranties on behalf of Emerson Electric.

The customer shall be responsible for all costs incurred in the removal or reinstallation
and shipping of the product for repairs. Within the limitations of this warranty, inoperative
units should be returned, freight prepaid to the nearest Emerson authorized service cen­ter and we will repair or replace, at our option, at no charge to you with return freight paid
by Emerson. It is agreed that such repair or replacement is the exclusive remedy avail­able from Emerson Electric Co. and that Emerson Is Not Responsible For Damages
Of Any Kind, Including Incidental And Consequential Damage. Some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above
exclusion or limitation may not apply to you.

The warranty gives you specific legal rights, and you may also have other rights which
vary from state to state or province to province.

Sales receipt required as proof of purchase for warranty claims.

2

3

Description HD7002 & HD7005

Gallon Output / 24 hrs 7
Litre Output / 24 hrs. 26.5

Capacity of Bottle 2.5 Gallons
Capacity of Bottle 9.4 Litres

* Sq. Ft. Coverage 1500

Fan Speeds 3
Number of Filters 2
Fill Light Yes
Auto Humidistat Yes
Auto Shut Off Yes
Controls Rotary
CUL Listed Yes
Volts 120 A.C.
Hertz 60
Amps 1.14
Watts 65

Know Your Humidifier

ControlsFan Assembly

Bottle Cover

Filter Support
Assembly

Filters
Replacement No. HDC-2R or
HDC411
NOTE: HDC411 provides two filter
changes.

* Based on an area with average insulation

and an 8-foot ceiling height.

4

Humidifier Operations

Your new Emerson humidifier is designed to
satisfy home humidity requirements through
the principle of evaporation of water into the air.

After water is added to the bottle and
positioned in the humidifier, the filters
begin to soak up the water and become
totally saturated in approximately 30 min­utes. Air is drawn in from the rear of the
humidifier and through the filters by means
of one circulation fan. As air passes
through the filters, moisture is absorbed
into the air and then released through the
top of the humidifier. This moist air is
released in the form of vapor. No water
droplets will enter the home. All evapora­tion into the air takes place in the humidifi­er, which means that the residue left by
evaporating water is not passed into the
home, but remains in the filter.

CAUTION: Use only liquid EPA
Registered Bacteriostat available from
your local retail store or call
[phone] to order. Under no cir­cumstances should you use water
treatment products for Roto belt or
Ultrasonic humidifiers.

Humidified Air is

Then Released

Through the Top

Dry Air Enters
Through the
Rear

.

CAUTION: Keep your humidifier clean.
While humidifiers do not cause colds,
some studies suggest that dirty humidi­fiers can cause cold-like symptoms in
some people. To avoid this, clean your
humidifier weekly with cleaners specifi­cally recommended for evaporative
humidifiers.

Assembly

Your new Emerson MoistAIR humidifier is
completely assembled for you to use.

Follow the instructions of this owner’s
manual for proper usage.

Locate nearest 120V A.C. wall socket in the
location desired, preferably on inside wall.
Plug in the electrical cord.

WARNING: To reduce the risk of fire or
shock hazard, do not use extension
cords. Humidifier should be plugged
directly into a 120V A.C. outlet.

To reduce the risk of electrical shock, this
humidifier has a polarized plug (one blade is
wider than the other). This plug will fit in a
polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse plug. If it still
does not fit, contact a qualified electrician to

install the proper outlet. Do not change the
plug in any way.

Electrical Hook-Up

WARNING: For your own safety, do
not use humidifier if any parts are
damaged or missing.

1. Place humidifier on a flat level surface in
area of house where most humidity is
needed, or an area which would likely
result in moist air being circulated
throughout the house, such as near a
cold air return. Placing the unit level is
very important if the humidifier is locat­ed on carpeting.

Moist air (humidity) produced will dis­perse into the whole house, but area
closest to the unit will have the highest
humidity. If the unit is positioned close to
a window, condensation may form on
the window pane. If this is not accept­able, the unit should be repositioned in
another location.

NOTE: Due to release of cool, moist air

from humidifier, it is best to direct air
away from home thermostat and hot air
registers. It is best to position humidifier

Location Instructions

Water Fill

WARNING: To reduce the risk of
shock, always unplug humidifier
before cleaning or servicing.

WARNING: To reduce the risk of fire or
shock hazard, do not pour or spill
water into control or motor area. If
controls get wet, let them dry com­pletely and have unit checked by an
authorized service personnel before
plugging in.

This humidifier is designed for use with the
water bottle located under the bottle cover
to the left of the fan assembly. The unit
should be positioned where it will be oper­ating.

next to an inside wall. Hot air registers
and cold air from outside walls can affect
the efficiencies of the controls. Unit
should not be placed where warm air
from a hot air register blows directly on
unit.

2. The humidifier should be positioned with
the back (cord exit side), at least 2 inch­es away from the wall. Air needs to enter
through louvers in the rear panel in order
for the humidifier to operate at peak effi­ciency.

At Least 2" From Wall

Bottle Cover

Water
Bottle

5