Emerson GirlPower GP308 Owner's Manual

Download

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6. ATTACHMENTS

Do not use attachments not recommended by the unit's manufacturer as they may cause hazards.

7. WATER AND MOISTURE

Do not use this unit near water- for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.

8. ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury and serious damage to the unit. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer.

8A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and

uneven surfaces may cause the appliance and cart combination to overturn.

9. VENTILATION

Slots and openings in the cabinet and in the back or bottom are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

10. POWER SOURCES

This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.

11. GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the

SAFETY INSTRUCTIONS

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

GP308.O/M.QXD 8/7/02 3:43 PM Page 1

PORTABLE CART WARNING (symbol provided by RETAC)

S3126A

safety purpose of the polarized plug. If your unit is equipped with a 3-wire grounding-type plug, having a third (grounding) pin, this plug will only fit into a grounding-type power outlet. This is a safety feature. Do not defeat the safety purpose of the grounding-type plug.

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13. LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power-line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electric Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for grounding electrode.

18. SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. DAMAGE REQUIRING SERVICE

Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the

operating instructions, as an adjustment of other controls may result in damage and will often require extensive work by a

qualified technician to restore the unit to its normal operation. e. If the unit has been dropped or the cabinet has been damaged. f. When the unit exhibits a distinct change in performance - this indicates a need for service.

20. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

21. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

22. WALL OR CEILING MOUNTING

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

23. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

24. NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

SAFETY INSTRUCTIONS (CONTINUED)

GP308.O/M.QXD 8/7/02 3:43 PM Page 2

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

NEC - NATIONAL ELECTRICAL CODE

S2898A

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

Thank you for purchasing this Emerson portable television with AM/FM radio. We are sure that this unit will provide you with many years of exceptional performance with a minimum of care and maintenance. Please review the contents of this instruction manual completely and carefully before operating your unit, to make sure that you understand all functions and operations and get the maximum benefit out of all the great features included in this product. If you should encounter any problems with the set-up or operation of this product, please contact the Emerson Radio Corporation Customer Service hot-line, toll free, at 1-800-898-9020.

The serial number of your unit can be found on a label on the rear of the cabinet. We suggest that you record the serial number in the space provided below in case this information is ever needed at a future date.

Model Number: GP308

Serial Number: _______________________________________

IMPORTANT NOTICE

If this unit is to be used in a car, van, recreational vehicle, etc., it must be secured properly so that it does not cause injury in an accident. Simply placing the TV on a seat, center console, dashboard or any other location in the vehicle is not recommended. Have it properly installed by a qualified installer specializing in such installations.

GP308.O/M.QXD 8/7/02 3:43 PM Page 3

LOCATION OF CONTROLS

1. TV Screen

2. Dial Scale and Pointer

3. Rod Antenna

4. TUNING Control

5. VOLUME Control

6. TV/OFF/RADIO Switch

7. Battery Compartment (Bottom of unit)

8. TV/BAND Switch

9. DC 12V Jack

10. Headphone Jack

11. External Antenna Jack

12. CONTRAST Control

13. BRIGHTNESS Control

14. V-HOLD Control

FRONT

SIDE

REAR

GP308.O/M.QXD 8/7/02 3:43 PM Page 4

1 4 5 6 872 3

9 10 11 12 13 14

POWER SOURCES

POWER SUPPLY

This TV is designed to operate from ten “C” size batteries, a 120VAC 60Hz AC Adapter or a Car Adapter.

BATTERIES

When either the AC adapter or the Car Adapter is inserted, the batteries will be automatically disconnected.

AC POWER

To operate the unit using AC power, connect the AC adapter to the jack labelled “DC 12V” on the unit and to a wall outlet having 120V, 60Hz only. NOTE: If the AC adapter’s plug does not fit into a nonpolarized outlet, do not file or cut the wide blade. Have the obsolete outlet changed by a qualified licensed electrician. CAUTION: Use only the AC adapter provided with this unit. Using another AC adapter may damage the unit. When not using AC power, disconnect the AC adapter from the wall outlet by pulling the plug (not the cord). Do not touch the AC adapter with wet hands.

DC (CAR BATTERY) POWER

Confirm that your car uses a 12V negative ground battery system by reading the car’ owner’s manual or contacting the manufacturer. Remove the cigarette lighter from its socket in the dash and connect one end of the Car Adapter into the DC 12V Jack on the back of the TV and the other end to the car cigarette lighter socket.

NOTE: Remove the Car Adapter from the car cigarette lighter socket when not in use.

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1. Use only the size and type of batteries speciﬁed.

2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

Slide the Battery Compartment cover in the direction of the arrow.

Close the Battery Compartment cover.

Insert ten “C” size Alkaline batteries as shown.

GP308.O/M.QXD 8/7/02 3:43 PM Page 5

+— +—

AC Adapter's Plug

AC Outlet

ANTENNA

The built-in telescopic rod antenna can be used to receive VHF and UHF TV channels. Fully extend and adjust for best reception.

An external antenna (not included) may be connected to the unit using an Antenna Adapter (included). Attach the 300 ohm twin-lead wire from the external antenna to the screw-terminal on the Antenna Adapter. Plug the Antenna Adapter into the external TV antenna jack on the rear of the unit.

HEADPHONE JACK

A Headphone jack is provided for private listening. To listen to the unit with a headphone (not included), set the volume to minimum and insert the headphone plug into the Headphone jack. The speaker will be disconnected when a plug is inserted in the jack. Adjust the VOLUME control as desired.

CONNECTION

GP308.O/M.QXD 8/7/02 3:43 PM Page 6

TV OPERATION

TO VIEW A CHANNEL

Slide the TV/OFF/RADIO switch to the TV position.

Tune a desired TV station by turning the TUNING control ❶ and adjusting the VOLUME control ❷ as desired.

Slide the TV/BAND switch to the desired setting: VHF LOW: Channels 2–6 VHF HIGH: Channels 7–13 UHF: Channels 14–69

Adjust the rod antenna for best reception.

Slide the TV/OFF/RADIO switch to the OFF position to turn the unit off.

Adjust picture controls, as described below, for best picture.

V-HOLD BRIGHTNESS CONTRAST

If the picture moves up and down or rolls, rotate to adjust the vertical hold.

If the picture is too strong or too weak, rotate to adjust the contrast and clearly define the shades of blacks, grays and whites.

If the picture is too light or too dark, rotate to adjust the brightness.

NOTES:

• When you change channels, the rod antenna may have to be re-adjusted for best picture.

• If reception is poor, even after adjusting telescopic antenna, use an external antenna. See page 6

for details.

GP308.O/M.QXD 8/7/02 3:43 PM Page 7

RADIO OPERATION

CARE AND MAINTENANCE

CLEANING

To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on the unit may be cleaned with a dust cloth. Never allow any liquid to get inside the cabinet.

MAINTENANCE

Do not expose this unit to an excessively hot environment for extended periods of time. Extreme heat could cause component failure or reduce component life.

TRAFFIC SAFETY

• Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.

• Even if your headset is an open air type designed to let you hear outside sounds, do not turn the volume up so high that you cannot hear what is around you.

• Use extreme caution or temporarily discontinue use in potentially hazardous situations.

TO LISTEN TO THE RADIO

Slide the TV/OFF/RADIO switch to the RADIO position.

Tune a desired radio station by turning the TUNING control ❶ and adjusting the VOLUME control ❷ as desired.

Slide the TV/BAND switch to the FM or AM position.

FM: Adjust the rod antenna for

best reception. AM: Turn the unit for best AM reception.

Slide the TV/OFF/RADIO switch to the OFF position to turn the unit off.

GP308.O/M.QXD 8/7/02 3:43 PM Page 8

TROUBLESHOOTING GUIDE

If you experience a problem with this unit, please refer to the following chart before requesting service.

SYMPTOMS POSSIBLE SOLUTIONS

• Make sure the power cord is plugged in.

• Try another AC outlet.

• Make sure TV/OFF/RADIO is in the RADIO or TV position.

• Batteries are weak, dead or not inserted properly.

• Station experiencing problems, tune to another station.

• Check VOLUME adjustment.