Emerson EWD7003 User Manual

OWNER’S
MANUAL

If you need additional assistance for set-up or operating
after reading owner’s manual, please call TOLL FREE : 1-800-256-2487

or visit our web site at http://www.funai-corp.com

Please read before using this equipment.

DVD PLAYER

PORTABLE CART WARNING
(Symbol provided by RETAC)

S3125A

EWD7003

EMERSON AND THE G-CLEF LOGO ARE
REGISTERED TRADEMARKS OF
EMERSON RADIO CORP., PARSIPPANY,
NEW JERSEY, U.S.A.

WARNING

:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

:

IMPORTANT SAFEGUARDS

1) Read Instructions - All the safety and operating instructions
should be read before the product is operated.

2) Retain Instructions - The safety and operating instructions
should be retained for future reference.

3) Heed Warnings - All warnings on the product and in the oper­ating instructions should be adhered to.

4) Follow Instructions - All operating and use instructions should
be followed.

5) Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.

6) Attachments - Do not use attachments not recommended by
the product manufacturer as they may cause hazards.

7) Water and Moisture - Do not use this product near water - for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool; and the like.

8) Accessories - Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product.
Any mounting of the product should follow the manufacturer’s
instructions, and should use a mounting accessory recom­mended by the manufacturer.

9) A product and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.

10)Ventilation - Slots and openings in the cabi­net are provided for ventilation and to
ensure reliable operation of the product and
to protect it from overheating, and these
openings must not be blocked or covered.
The openings should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation such as a book­case or rack unless proper ventilation is provided or the manu­facturer's instructions have been adhered to.

11)

Power Sources - This product should be operated only from the type
of power source indicated on the marking label. If you are not sure
of the type of power supply to your home, consult your product deal­er or local power company. For products intended to operate from
battery power, or other sources, refer to the operating instructions.

12)

Grounding or Polarization - This product may be equipped with
a polarized alternating-current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.

13)

Power-Cord Protection - Power-supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon

The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an equilateral trian­gle is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.

or against them, paying particular attention to cords at plugs, conve­nience receptacles, and the point where they exit from the product.

14)Lightning - For added protection for this product during a light­ning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the
product due to lightning and power-line surges.

15)Power lines - An outside antenna system should not be locat­ed in the vicinity of overhead power lines or other electric light
or power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.

16)Overloading - Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of
fire or electric shock.

17)Object and Liquid Entry - Never push objects of any kind into
this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.

18)

Servicing - Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service personnel.

19)Damage Requiring Service - Unplug this product from the wall
outlet and refer servicing to qualified service personnel under
the following conditions:
a) When the power-supply cord or plug is damaged,
b)

If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper adjust-

ment of other controls may result in damage and will often

require extensive work by a qualified technician to restore

the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance

- this indicates a need for service.

20)Replacement Parts - When replacement parts are required, be
sure the service technician has used replacement parts speci­fied by the manufacturer or have the same characteristics as
the original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.

21)

Safety Check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.

22)Heat - The product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

PRECAUTIONS

LASER SAFETY

This player employs a laser. Only a qualified service person should remove the cover or attempt to service this
device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO

NOT STARE INTO BEAM.

LOCATION: INSIDE, ON THE DECK MECHANISM.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifica­tions to this equipment may cause harmful interference unless the modifications are expressly
approved in the instruction manual.The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA

FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula­tions concerning chemical wastes.

About Copyright

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineer­ing or disassembly is prohibited.

–2–

EN

TABLE OF CONTENTS

■

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

■

INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Symbols Used in this Manual. . . . . . . . . . . . . . . . . . . . . 4

■

ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Disc Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

■

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

■

FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . 6

FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

REAR VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 6

Loading the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . 7

■

HOOK UPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Connecting to a TV using a VIDEO OUT Jack

or a S-VIDEO OUT Jack . . . . . . . . . . . . . . . . . . . . . . . . 7

Connecting to an Amplifier Equipped with Digital Input

Jacks such as MD deck or DAT deck . . . . . . . . . . . . . . . 8

Connecting to a Dolby Digital decoder . . . . . . . . . . . . . . 8

Connecting to a TV or a Stereo TV that has Component

VIDEO In Jacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

■

PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

CALLING UP A MENU SCREEN DURING

PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . 9

Resume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Fast Forward / Reverse Search . . . . . . . . . . . . . . . . . . 10

Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . 10

Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . 10

Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

REPEAT TITLE / CHAPTER. . . . . . . . . . . . . . . . . . . 10

REPEAT TRACK . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

REPEAT A-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

On-Screen Information. . . . . . . . . . . . . . . . . . . . . . . . . 11

Track Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Changing the On-Screen Display . . . . . . . . . . . . . . . . . 12

Parental Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

PARENTAL LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . 13

IF YOU FORGET THE PASSWORD . . . . . . . . . . . . . 13

CONTROL LEVELS . . . . . . . . . . . . . . . . . . . . . . . . . 13

Marker Setup Screen. . . . . . . . . . . . . . . . . . . . . . . . . . 13

■

DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Audio Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Display Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

■

TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . 15

■

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

■

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

INDICE

■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 17

PANEL DELANTERO / VISTA TRASERA . . . . . . . . . 17

MANDO A DISTANCIA. . . . . . . . . . . . . . . . . . . . . . . 17

Instalación de las Pilas . . . . . . . . . . . . . . . . . . . . . . . . 18

■ CONEXIONES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Conexión a un Televisor. . . . . . . . . . . . . . . . . . . . . . . . 18

Conexión a un Amplificador Equipado con tomas de

Entrada Digital, Platina MD o Platina DAT . . . . . . . . . . 18

Conexión a un Descodificador Dolby Digital . . . . . . . . . 18

Conexión a un Televisor o a un Televisor Estéreo Que

tenga tomas Component Video in . . . . . . . . . . . . . . . . 18

■ REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . 19

Reproducción de un DVD de Vídeo o un CD de Audio . 19

–3–

EN

INTRODUCTION

1

Part #NA654UD

Supplied Accessories Symbols Used in this Manual

• Remote control

• Two AA batteries

• Owner’s Manual

• VIDEO/AUDIO cables

• RETURN STOP SHEET

Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.

The following symbols appear below in some headings and
notes in this manual, with the following meanings!

DVD-V

: Description refers to playback of DVD video discs.

CD

: Description refers to playback of audio CDs.

MP3

: Description refers to playback of MP3 discs.

QUICK

: Description refers to the items to be set in the QUICK

mode.

ABOUT THE DISCS

Playable Discs

The following discs can be played back on this DVD player.

¡

DVD video

¡

DVD+R/RW*

¡

CD-R/RW*

*Depending on the types or the writing method of the medium some discs can not be played.

• Some DVD-R/RW, DVD+R/RW, or CD-R/RW discs made on personal computers, or on DVD recorders may not be played
back properly due to the factors such as scratches, dirt or special properties of the disc.

• Discs made on personal computers may not be played back properly due to the different environment or the settings of the
application you use. We recommend always to use the standardized, rightly formatted discs. (Please contact the sales
agency for more detail).

This player conforms to the NTSC color system.You cannot play discs recorded in other color systems such as PAL or SECAM.

• Some discs include region codes as shown below.

¡

DVD-R/RW*

¡

Audio CD

¡

MP3*

• The number inside the symbol refers to a region of the world, and a disc encoded in a specific region format can only be
played back on DVD player with the same region code.

For Customer Use:
Read carefully the information located at the bottom of your DVD player and enter below the Serial No.Retain this informa­tion for future reference.
Model No. DVD player
Serial No. __________________________

The following discs cannot be played back on this DVD player.

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

DVD with region codes other than 1 or ALL.
DVD-ROM
DVD-RAM (Never play back, otherwise malfunction may result.)
CD-ROM
VSD
CDV (Only plays back the audio part.)
CD-G (Only plays back the sound.)
CD-I (Never play back, otherwise malfunction may result.)
SACD
Photo CD (Never play back, otherwise malfunction may result.)
Video CD (Never play back, otherwise malfunction may result.)

Any other discs without compatibility indications.

–4–

EN

ABOUT THE DISCS

Example

Track 1 Track 2 Track 3 Track 4 Track 5 Track 6

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1 Chapter 2Chapter 3 Chapter 4

Example

Group 1 Group 2

Track 1 Track 2 Track 1 Track 2Track 3 Track 4

Disc Types

[DVD]

Data on a DVD is divided into sections called "titles", and then
into subsections called "chapters", each of which is given a title
or chapter number. Playback conditions are preset on some
DVD video discs, and these playback conditions take priority
over user operations on this player. If a function you selected do
not run as desired, refer to the manual accompanying the disc.

[Audio CD]

Data on an audio CD is divided into sections called “tracks”,
each of which is given a track number.

[MP3]

Data on a MP3 is divided into sections called "groups", and
then into subsections called "tracks", each of which is given
a group or track number.

FEATURES

¡Dolby Digital sound

This player can handle Dolby Digital surround sound hav­ing 5.1 channels when connected to a Dolby Digital
decoder.

¡Still/fast/slow/step playback
¡Random playback for audio CD and MP3
¡Program playback for audio CD and MP3
¡DVD menus in a desired language
¡Screen saver/Auto power-off functions

The screen saver program starts when there is no input from
the player for five minutes in the stop mode. When the
screen saver program is activated for 30 minutes, the power
is automatically turned off.

¡Subtitles in a desired language
¡Selecting a camera angle
¡Choices for audio language and sound mode
¡Parental lock
¡Automatic detection of discs

This player automatically detects if a loaded disc is DVD,
audio CD or MP3 on disc.

¡Playing an MP3 disc
¡Direct Search
¡On-screen display

Information about the current operation can be displayed
on a TV screen, allowing you to confirm the currently
active functions (such as program playback), on the TV
screen using the remote control.

¡Search

Chapter search / Title search / Track search / Time search

¡Repeat

Chapter / Title / Track / Group / All / A-B

¡Zoom
¡Marker

An electronic references point designated by user can be
called back.

¡Resume Play
¡Virtual Surround
¡Component Video Out Jacks

Jacks located on the back of the DVD Player which are
used to send high-quality video to a TV via Component
Video In Jacks.

¡Bit rate indication
¡DRC (Dynamic range control)

You can control the range of sound volume.

¡Black Level Setting

–5–

EN

AUDIO OUT

COAXIAL

VIDEO

OUT

LY

RCb

Cr

15141311 12 16

DIGITAL AUDIO
OUT PCM/
BITSTREAM

COMPONENT

VIDEO OUT

S-VIDEO OUT

RETURN

ZOOM

MODE

MENU

SKIPPAUSEA-B

REPEAT

ANGLE

AUDIO

SUB
TITLE

CLEAR

TITLE

STOP

PLAY

FWDREV

SETUP

ENTER

OPEN/
CLOSE

SEARCH

MODE

DISPLAY

123

456

789

0 +10

POWER

1

2
3

4

5
6
7

8

9
10
11

14

12
13

15

18

19

17
16

21
20

22

23

24

25

FUNCTIONAL OVERVIEW

FRONT PANEL

REAR VIEW

[Fig. 1]

[Fig. 2]

1. POWER

to switch the player to ON or OFF

2. SKIP H / SEARCH

hh

goes to previous chapter or track during playback; press
and hold for 1.5 seconds for a reverse search

3. PLAY

to start or resume disc playback

4. SKIP G / SEARCH

gg

goes to next chapter or track during playback; press and
hold for 1.5 seconds for a forward search

5. STOP

to stop playback

6. OPEN/CLOSE

to open/close the disc tray

7. Disc tray

8. POWER Indicator

lights when the power is on.

9. PLAY Indicator

lights during disc playback.

REMOTE CONTROL

1. DISPLAY

to access or remove the display screen during DVD or
Audio CD playback

2. POWER

switch DVD player ON or OFF

3. AUDIO

to choose audio languages or sound modes

4. SUBTITLE

5. ANGLE

6. REPEAT

7. REPEAT A-B

8. CLEAR

subtitle language DVD selector

select DVD camera angle

repeat chapter, track, title, all.

repeat a specific segment

to reset the setting

[Fig. 3]

10. DISC IN Indicator

light appears when a disc is in the DVD player.

11. MAIN (AC Power Cord)

connect to a standard AC outlet

12. COAXIAL (Digital audio out)

connect to AUDIO inputs of a digital (coaxial) audio
equipment

13. AUDIO OUT (Left/Right)

connect to AUDIO inputs of an amplifier, receiver or
stereo system

14. VIDEO OUT

connect to the Video Input of a TV.

15. COMPONENT VIDEO OUT

connect to a TV with Component video in jacks.

16. S-VIDEO OUT

connect to a TV with S-Video inputs

Caution: Do not touch the inner pins of the jacks on the
rear panel. Electrostatic discharge may cause permanent
damage to the player.

9. PAUSE

pause playback temporarily / frame-by-frame playback

10. REV

hh

to view DVD picture in fast reverse motion

11. PLAY

to start a DVD disc playback

12. SETUP

to access or remove the DVD setup menu

13. MODE

to set up programmed or random playback (Audio CD)
to set the black level and virtual surround during DVD
playback

14. ZOOM

enlarge DVD video image

15. TITLE

to display title menu of a disc

16. ENTER

acknowledge menu selection

17. RETURN

to return previous or remove setup menu

18. Arrow (sB

KK LL

)

(left/right/up/down) select an item in the menu

19. MENU

to display the menu of the DVD disc

20. STOP

to stop a DVD disc playback

21. FWD

gg

to view DVD picture in fast forward motion

22. SKIP H,G

to skip chapter/tracks

23. 0-9 numerical buttons

select numbered items in a menu

+10

use this button to enter number 10 and above

24. OPEN/CLOSE

to open/close the disc tray

25. SEARCH MODE

–

to locate a desired point

6 –

EN

FUNCTIONAL OVERVIEW

AUDIO OUT

COAXIAL

VIDEO

OUT

LY

RCb

Cr

DIGITAL AUDIO
OUT PCM/
BITSTREAM

COMPONENT

VIDEO OUT

S-VIDEO OUT

A/V-compatible or

wide screen TV

To Right (red) and Left (white)

AUDIO OUT jacks

To VIDEO INPUT jack

To Right (red) and Left (white)

AUDIO INPUT jacks

To S-VIDEO OUT jack

To S-VIDEO INPUT jack

To VIDEO OUT jack

or

AUDIO OUT

COAXIAL

VIDEO

OUT

LY

RCb

Cr

DIGITAL AUDIO
OUT PCM/
BITSTREAM

COMPONENT

VIDEO OUT

S-VIDEO OUT

A/V-compatible

or

wide screen TV

Stereo system

or

To Right (red) and Left

(white) AUDIO OUT jacks

To VIDEO INPUT jack

To Right (red) and

Left (white) ANALOG

AUDIO INPUT jacks

To VIDEO OUT jack

To S-VIDEO INPUT jack

To S-VIDEO OUT jack

Loading the Batteries

1. Open the battery compartment cover.

2. Insert two AA batteries, with each one oriented correctly.

3. Close the cover.

NOTES

• Do not mix alkaline and manganese batteries.

• Do not mix old and new batteries.

HOOK UPS

CAUTION:

• Be sure to turn off the Player and equipment to be connected before connecting.

• Read through the operation manual for the equipment to be connected.

• Be sure that the colors of the jacks and plugs match up when using VIDEO/AUDIO cables.

• Be sure to keep the Player connection cables separate from the TV antenna cable when you install the Player, because it

may cause electrical interference when you are watching television programs.

Connecting to a TV using a VIDEO OUT Jack or a S-VIDEO OUT Jack

Use an S-Video cable (commercially available) in place of the yellow video cable to enjoy pictures of higher quality.

–7–

[Fig. 4]

[Fig. 5]

EN

HOOK UPS

AUDIO OUT

COAXIAL

VIDEO

OUT

LY

RCb

Cr

DIGITAL AUDIO
OUT PCM/
BITSTREAM

COMPONENT

VIDEO OUT

S-VIDEO OUT

To COAXIAL DIGITAL

AUDIO OUT jack

To VIDEO INPUT jack

To VIDEO OUT jack

To S-VIDEO INPUT jack

To S-VIDEO OUT jack

To COAXIAL DIGITAL

AUDIO INPUT jack

A/V-compatible

or

wide screen TV

Amplifier equipped with digital

input jacks, MD deck,

DAT deck, etc.

or

AUDIO OUT

COAXIAL

VIDEO

OUT

LY

RCb

Cr

DIGITAL AUDIO
OUT PCM/
BITSTREAM

COMPONENT

VIDEO OUT

S-VIDEO OUT

To Right (red) and Left (white)

AUDIO OUT jacks

To Right (red) and Left (white)

ANALOG AUDIO INPUT jacks

To COMPONENT

VIDEO INPUT jack

To COMPONENT

VIDEO OUT jack

Stereo system

A/V-compatible

or

wide screen TV

AUDIO OUT

COAXIAL

VIDEO

OUT

LY

RCb

Cr

DIGITAL AUDIO
OUT PCM/
BITSTREAM

COMPONENT

VIDEO OUT

S-VIDEO OUT

To COAXIAL DIGITAL

AUDIO OUT jack

To VIDEO INPUT jack

To VIDEO OUT jack

To S-VIDEO INPUT jack

To S-VIDEO OUT jack

To COAXIAL DIGITAL

AUDIO INPUT jack

A/V-compatible

or

wide screen TV

Front

speaker

(left)

Center speaker

Front

speaker

(right)

Surround

speaker

(left)

Surround

speaker

(right)

Subwoofer

Dolby Digital,

decoder

or

NOTES:

• Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the
copy protection system.

• Be sure to turn off the power to all components in the system before connecting another component.

• Refer to the Owner's Manuals for your TV, stereo system and any other components to be connected to the DVD player.

Connecting to an Amplifier Equipped with Digital Input Jacks such as MD deck or DAT deck

Use an audio coaxial digital cables (not included) for the audio connections. Connecting to an amplifier equipped with digital
input jacks such as MD Deck or Dat Deck.

[Fig. 6]

NOTES:

• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD
or DAT deck.

• Set Dolby Digital to off for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise dis­tortion, and may also damage the speakers.(See page 13 to set ON for Dolby Digital)

Connecting to a Dolby Digital decoder

If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround, the DVD player outputs a Dolby Digital
data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital decoder, you can enjoy
a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can
be heard in movie theaters.

Use an audio coaxial digital cables (not included) for the audio connections.

NOTES:

•

If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to ON for audio output in the setup mode.

• Unless connected to a Dolby Digital decoder, set Dolby Digital to OFF for audio output in the setup mode. Playing a DVD
using incorrect settings may generate noise distortion, and may also damage the speakers.

Connecting to a TV or a Stereo TV that has Component VIDEO In Jacks

HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS

If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s 75-ohm coaxi­al antenna terminal using a commercially available Stereo Audio/Video RF Modulator. Connect the audio and video outputs of the DVD
player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked
“TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your
TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked “ANT IN”), then con­nect the RF modulator to your TV’s antenna terminal as described above.

NOTE

•

The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal through an RF Modulator.

–8–

[Fig. 7]

[Fig. 8]

EN

PLAYING A DISC

Basic Playback Disc Menu

CDDVD-V

Getting started

• Turn on the power of the TV, amplifier and any other com­ponents which are connected to the DVD.

• Make sure the TV and audio receiver (commercially avail­able) are set to the correct channel.

1

Press POWER.

2

Press

3

4

5

NOTES:

DVD may contain menus to navigate the disc and access
special features. Press the appropriate numerical key or use
Arrow ( L / K / B / s ) to highlight your selection in the DVD
main menu and press ENTER to confirm.

NOTE:

OPEN/CLOSE to open disc loading tray.

Place the chosen disc in the tray,
with the label facing up.
Press

PLAY.

• The tray will close automatically, and
playback will then start from the first
chapter or track of the disc. If the
playback does not start automatical­ly, press PLAY.

• When you playback the DVD with a title menu is
recorded, it may appear on the screen. In this case,
refer to “TITLE MENU”.

Press STOP twice to stop playback.

• A “prohibited icon” may appear at the top-right on the
TV screen during operation, warning that
a prohibited operation has been encoun­tered by the DVD player or the disc.

• With DVDs that use some titles for play­back program signals, playback may start
from the second title, or it may skip these
titles.

• During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.

General Features

• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.

Pause

DVD-V

1

Press MENU.

• The DVD main menu will appear.

2

If the feature is not available, symbol may
appear on the TV screen.

3

If disc menu is available on the disc, audio lan­guage, subtitle options, chapters for the title and
other options will appear for selection.

4

Press

Arrow ( L / K / B / s ) to select an item, and

ENTER to confirm selection.

Title Menu

DVD-V

1

Press TITLE.

• The title menu will appear.

2

If the feature is not available, symbol may
appear on the TV screen.

3

Press

Arrow ( L / K / B / s ) to select an item, and

ENTER to confirm selection.

• Playback will begin at the selected Title.

CALLING UP A MENU SCREEN DURING PLAYBACK

DVD-V

• Press MENU to call up the DVD main menu.

• Press

NOTE:

TITLE to call up the title menu.

• Contents of menus and corresponding menu opera­tions may vary between discs. Refer to the manual
accompanying the disc for details.

Step by Step Playback

DVD-V

1

During playback, press PAUSE.

• Playback will pause and sound will be muted.

2

The disc advances by one frame each time PAUSE
is pressed.

3

To exit step by step playback, press

PLAY.

1

During playback, press PAUSE.

• Playback will pause and sound will be muted.

2

To continue playback, press PLAY.

CDDVD-V

Resume

CDDVD-V

1

During playback, press STOP.

• Resume message will appear on the TV screen.

2

Press PLAY, playback will resume from the point
at which playback was stopped.

• To cancel resume, press STOP twice.

–9–

EN

PLAYING A DISC

/2

Fast Forward / Reverse Search

MP3CDDVD-V

1

During playback, press
ly to select the required forward or reverse speed: x2, x8,
x50, x100.

• If you are using SKIP G / SEARCH

panel, press and hold it for more than 1.5 sec (the
longer you hold it, the faster the speed will be)

you reach the desired speed, release the button.

• For audio CDs, the speed is fixed at

• For MP3, the speed is fixed at

2

To return to normal playback, press PLAY.

FWDggor

x8.

REVhhrepeated-

gg

on the front

. When

x16.

2

Within 30 seconds, select a desired track number using

numerical buttons. For single digits press “0” first.

• Playback will start at the selected track.

Using the SKIP

During playback, press
Press it repeatedly to skip subsequent tracks. Press
to go back to the beginning of the current track. Press it repeat­edly to go to the previous tracks

•

Track number will appear briefly on the DVD display panel.

• If SKIP is pressed while the playback is paused, the
playback will be paused again after skipping to the next
track.

HH GG

SKIP

GG

to move to the next track.

.

SKIP

HH

NOTE:

•

SKIP HGare not available when playback is stopped.

Slow Forward / Slow Reverse

DVD-V

1

During playback, press PAUSE.

2

Press

FWDggor REVhh.

•

Slow motion playback will begin and sound will be muted.

3

Press FWDggor REV

hh

repeatedly to select
the required speed: 1/16, 1/8, 1/2 of the normal
playback.

• If you are using SKIP H / SEARCH

panel, press and hold it for more than 1.5 sec (the
longer you hold it, the slower the speed will be)

hh

on the front

. When

you reach the desired speed, release the button.

4

To return to normal playback, press PLAY.

Zoom

DVD-V

The Zoom function allows you to enlarge the video image
and to pan through the enlarged image.

1

Press ZOOM during playback.

• Playback will continue.

2

Press ZOOM repeatedly to select the required
zoom factor: x2, x4 or OFF.

3

Use

Arrow ( L / K / B / s ) to move the zoomed

picture across the screen.

4

To exit zoom mode, press

NOTES:

• Zooming function does not work while disc menu is
shown.

• x4 zoom is not available on some discs.

ZOOM to OFF.

Track

CD

There are three ways to begin playback on an Audio CD at a
specific Track.

Using the Numerical buttons

1

Press numerical buttons to enter the desired
Track number.

• Playback will start at the selected track.

• For single digit tracks (1-9), press a single number (eg.

track 3, press 3).

•

To play track 26, press +10, 2, 6 on the numerical button.

Using the SEARCH MODE

1

Press SEARCH MODE.

• The track search display appears.

Title / Chapter Search

DVD-V

1

Press SEARCH MODE once for the Chapter search,
twice for the Title search during playback.

2

Enter the desired chapter/title number using

numerical buttons.

Time Search

CDDVD-V

1

During playback, press SEARCH MODE three times

(CD: twice) to display the Time Search on the TV
screen.

2

Within 30 seconds, enter a desired disc time using

numerical buttons.

• Playback will start at the specified time.

3

Press CLEAR to erase the incorrect input.

Repeat

• REPEAT are available only during playback.

REPEAT TITLE / CHAPTER

DVD-V

To activate the repeat function, press REPEAT during playback.

• The repeat mode changes as described below every time
you press the button.

CHAPTER TITLE OFF

(current chapter repeat) (current title repeat)

NOTES:

• Repeat Title/Chapter is not available with some scenes.

• The REPEAT setting will be cleared when moving to

other title or chapter.

(repeat off)

–10–

EN

3

PLAYING A DISC

PLAY

CD [AUDIO] TOTAL 0:45:56

RANDOM PROGRAM

--no indication--

RANDOM

REPEAT TRACK

CD

To activate the repeat function, press REPEAT during playback.

• The repeat mode changes as described below every time
you press the button.

TRACK ALL OFF

(current track repeat) (entire disc repeat)

(repeat off)

Random Playback

CD

This shuffles the playing order of tracks instead of playback
in the sequence.

1

In stop mode, press
MODE twice.

•

RANDOM screen appears

2

Press PLAY to start ran-

.

dom playback.

NOTES:

•

The REPEAT setting will be cleared when moving to other track

•

Repeat playback does not function during repeat A-B playback.

REPEAT A-B

CDDVD-V

1

Press REPEAT A-B at your chosen starting point.

• A- appears briefly on the TV screen.

2

Press REPEAT A-B again at your chosen end point.

• A-B appears briefly on the TV screen, and the repeat
sequence begins.

3

To exit the sequence, press REPEAT A-B.

NOTES:

• The repeat A-B section can only be set within the current
title (for DVDs), or current track (for audio CDs).

• Repeat A-B is not available with some scenes in DVD.

•

To cancel the A point which was set, press CLEAR.

• Repeat A-B playback does not function during title, chap­ter, track or all repeat playback.

Program

CD

You may determine the order in which tracks will play.

1

In stop mode press MODE.

• The PROGRAM screen
will appear.

2

Press ▲ or ▼ to select a
track, then press

• Press CLEAR to erase
the The most recently
entered program.

3

Press PLAY to play the
programmed tracks.

NOTES:

•

While the program is being played back, the STOP works as follows.

•

Press STOP once and then PLAY again, playback will restart
from the point where STOP was pressed. (Program continued)

•

Press STOP twice and then PLAY again, playback will restart
from the track in the usual way. (Program cleared)

• Up to 99 programs can be entered.

• If you like to repeat the current track in the program, press

REPEAT repeatedly until TRACK appears during play­back. If you like to repeat the entire program press

REPEAT repeatedly until ALL appears during playback.

ENTER.

NOTES:

• If you like to repeat the cur-

.

rent track in the random
selection, press REPEAT repeatedly until TRACK
appears during playback. If you like to repeat the entire ran­dom selection press REPEAT repeatedly until ALL
appears during playback.

MP3 Playback

When a CD with MP3 files is inserted in the DVD player, the
MP3 menu will appear on the TV screen, and number of
tracks is displayed on the front panel.

1

In stop mode, press K or L to select the desired
group or track.

• If a group is selected, press
the track selection
screen. Press K or L to
choose a track, then
press PLAY or ENTER.

• If a track is selected,
press PLAY or ENTER to
start playing tracks.
Starting from the one
you’ve just chosen the
subsequent tracks will be
played.

• Choose FIRST PLAY to start playback from the begin­ning of the listed tracks.

• Press

2

TITLE to return to the first item.

Press STOP to stop playback.

B

or ENTER to go on to

NOTES:

• Folders are known as Groups; files are known as Tracks.

• MP3 files are accompanied by icon.

• Maximum of 255 folders can be recognized.

• Maximum of 256 files can be recognized.

• Up to 8 hierarchies can be created.

This player recommends the use of files recorded at the below spec­ifications

:

• Sampling frequency: 44.1kHz or 48kHz

• Constant bit rate: 112kbps ~ 320kbps.

On-Screen Information

You can check the MP3 files during playback.

1

Press DISPLAY.

• The name of the file currently in play will be displayed.

2

Press DISPLAY again to show the track number,

MP3

MP3

the elapsed time, the repeat status, and the play­back status at the top of the screen.

• will be displayed when the repeat play has been
selected.

–11–

T - indicates Track repeat
G - indicates Group (folder) repeat
A - indicates Disc repeat

3

Press DISPLAY again to exit.

EN

PLAYING A DISC

9/49 0:00:00 -0:00:00

Track Selection

1

Press SEARCH MODE during playback.

• The FILE LIST will appear.

2

Select a desired track using Arrow (L/K/B/s).

• Press Bwhen you want to go to the next hierarchy.

• Press

s

hierarchy.

3

Press PLAY to start playing

when you want to go back to the previous

NOTES:

•

Press SEARCH MODE to EXIT.

• Some selections may require additional time to be recog­nized.

Random Playback

1

Press MODE twice while playback is stopped.

2

Press

PLAY to play the tracks in random order.

Program

This feature allows you to program a mp3 disc to play in a
desired sequence.

1

Press MODE while playback is stopped.

• The PROGRAM screen will appear.

2

Press K or L to select a track, then press ENTER,
to save it in a program.

• Press CLEAR to erase the incorrect input.

3

Press PLAY to start programmed playback.

Audio Language

The DVD player allows you to select a language during DVD
disc (if multi language available) playback.

1

Press AUDIO during playback.

2

Press

AUDIO repeatedly to select your desired

language.

Stereo Sound Mode

1

Press AUDIO repeatedly during playback to select
between STEREO, L-CH or R-CH.

STEREO - both right and left channels are active (stereo)
L-CH - only left channel is active
R-CH - only right channel is active

NOTE:

• If the Virtual Surround setting is ON, the sound mode will
be fixed to STEREO, and can not be changed.

MP3

MP3

MP3

DVD-V

CD

–12–

Subtitle Language

DVD-V

The DVD player allows you to select a language for subtitle
during DVD disc (if available) playback.

1

Press SUBTITLE during playback.

2

Press

SUBTITLE repeatedly to select your desired

subtitle language.

• The selected language will be displayed on the display
bar at the top of the screen.

3

To turn off subtitles, press SUBTITLE repeatedly
until OFF appears.

NOTES:

•

Pressing AUDIO may not work on some DVDs with multiple
audio languages (e.g. DVDs which allow audio language set­ting on the disc menu).

• Some discs allow audio language setting/subtitle language
setting on the disc menu. (Operation varies between discs,
so refer to the manual accompanying the disc.)

•

If the desired language is not shown after pressing SUBTITLE
several times, the disc does not have subtitles in that language.

• If you choose a Language that has a 3 letter language
code, the code will be displayed every time you change the
Subtitle language setting. If you choose any other lan­guages, ‘---’ will be displayed instead. (Refer to page 14.)

Camera Angle

DVD-V

Some DVD discs contain scenes which have been shot simulta­neously from various angles. You can change the camera angle
when the ( ) icon appears on the screen.

1

Press ANGLE during playback.

• The selected angle will be displayed on the display bar
at the top of the screen.

2

Press ANGLE repeatedly to select your desired angle

Changing the On-Screen Display

DVD-V

You can check information about the current disc by pressing

DISPLAY on the remote control.

1

Press DISPLAY during play-
back to show current Chapter

• The elapsed and remaining
playing time of the current chapter will be displayed.

2

Press DISPLAY again to show current Title.

• The elapsed and remaining playing time of the current
title will be displayed.

3

Press DISPLAY the third time.

• The BIT RATE and the current repeat setting will be
displayed.

• If you are playing a dual layered disc, the layer number
will also be displayed ( L0: Layer 0 is playing. L1: Layer
1 is playing).

4

Press DISPLAY the fourth time to remove the display.

.

CD

1

Press DISPLAY during playback, the current Track
will be displayed on the TV screen.

• The elapsed and remaining playing time of the current
track will be displayed.

2

Press DISPLAY again to show current Total Track.

• The elapsed and remaining playing time of the current
total track will be displayed.

3

Press DISPLAY the third time to remove the display.

EN

.

PLAYING A DISC

ON

OFF

PARENTAL

PARENTAL LEVEL ALL

AUDIO
DRC OFF
DOLBY DIGITAL ON
DOWN SAMPLING ON

Parental Control

DVD-V

Parental Control limits the disc viewing that exceed your set­tings. (with a password or playback will stop.)
This feature allows you to prevent discs with alternative
scenes from being played by your children.

PARENTAL LEVEL

Parental Level allows you to set the rating level of your DVD discs.
Playback will stop if the disc’s ratings exceed the level you set.

1

Press SETUP in STOP mode.

2

Press B to select

3

Press s or B to select
PARENTAL, then press ENTER.

4

Enter your four-digit password
then press

5

Press K or L to select
PARENTAL LEVEL, then press ENTER.

6

Press K or L to select the desired level.

7

Press SETUP to exit.

NOTES:

• When doing this for the first time, enter any 4 digits.(except
for 4737) That number will be used as the password from
the second time onward.

•

To change the password, press K or L to select CHANGE, then
press ENTER. Enter the four-digit pass-word, then press ENTER.

• With some DVDs, it may be difficult to find if they are com­patible with parental lock. Be sure to check if the parental
lock function operates in the way that you have set.

• Record the password in case you forget it.

IF YOU FORGET THE PASSWORD

1

Press 4, 7, 3, 7 at step 4.

•

Password will be cleared and parental level will be set to ALL.

2

Proceed the above steps 5-7 again.

CUSTOM, then press ENTER.

ENTER.

CONTROL LEVELS

• ALL

All parental lock is cancelled.

• Level 8

DVD software of any grade (adult/general/children) can
be played back.

• Levels 7 to 2

Only DVD software intended for general use and chil­dren can be played back.

• Level 1

Only DVD software intended for children can be played back,
with those intended for adult and general use prohibited.

Marker Setup Screen

CDDVD-V

Use markers to memorise your favourite places on a disc.

1

Press SEARCH MODE four times (CD: three times)
during playback.

•

The display screen and Markers will appear on the TV screen.

2

Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10
and ensure that “- :- - :- -” appears in the display.

3

When reaches the desired point, press ENTER.

• The Title or Track and elapsed playing time will appear
in the TV screen.

4

To return to the Marker later, press SEARCH
MODE

four times

and

s or B to choose the desired marker, then

press

ENTER.

NOTES:

• Opening the disc tray or turning off the power or select
AC at step and press ENTER will erase all Markers.

• To clear a marker, using s or B, position the cursor on
to the marker number to be cleared and press CLEAR.

• You can mark up to 10 points.

5

Press SEARCH MODE or RETURN to exit.

(CD: three times)

2

during playback

DVD SETUP

Audio Setting

Choose the appropriate Audio settings for your equipment as it
only affect during the playback of DVD discs of the DVD player.

1

Press SETUP in STOP mode.

2

Press B to select

• CUSTOM mode will appear.

3

Press s or B to select AUDIO, then ENTER to confirm.

4

Press K or L to select the
below items, then press

ENTER.

DRC (Dynamic Range Control) :

• To compress the range of sound
volume.

• The default setting is OFF.

DOLBY DIGITAL :

Set to ON when the player is connected to Dolby Digital
Decoder.

(ON : Output by Dolby Digital)
(OFF : Convert the Dolby Digital to PCM)

• The default setting is ON.

DOWN SAMPLING :

• Set to ON when outputting in 48kHz.

• The default setting is ON.

When playing disc with copyright Protection

• If you select OFF, copyright protection will be activated
and sound will be down sampled at 48kHz.

5

Press SETUP to exit.

CUSTOM, then press ENTER.

QUICK

Black Level Setting

Adjust the Black Level Settings to make the black parts of
the picture brighter.

1

Press MODE during playback.

2

Press ENTER to switch ON/OFF

ON : Makes the dark parts brighter.
OFF : Shows the original picture as recorded.

3

Press MODE twice or RETURN to exit.

.

Virtual Surround

You can enjoy stereophonic visual space on your existing
stereo system.

1

Press MODE twice (CD/MP3: once) during playback

2

ENTER to set it 1(Natural effect),

Press
2(Emphasized effect) or OFF.

3

Press

MODE or RETURN to exit.

NOTE (for CD play only):

• Vir tual Surround will not be effective if the sound mode
is set to something other than STEREO.

–13–

DVD-V

MP3CDDVD-V

.

EN

DVD SETUP

DISPLAY

TV ASPECT

4:3 LETTER BOX
ANGLE ICON ON
AUTO POWER OFF ON

LANGUAGE
AUDIO ORIGINAL
SUBTITLE OFF
DISC MENU ENGLISH
PLAYER MENU ENGLISH

Display Setting

DVD-V

You can change certain aspects of the DVD display screens,
on-screen messages and the display panel on the front of
the DVD player.

1

Press SETUP in STOP mode.

2

Press

B to select CUSTOM, then press ENTER.

• CUSTOM mode will appear.

3

Press s or B to select DISPLAY, then ENTER to
confirm.

4

Press

K or L to select the

below items, then press

ENTER.

TV ASPECT :

• Press K or L for an item selection, then press

ENTER.

• Select 4:3 LETTER BOX for a black bars appears on
top and bottom of the screen.

• Select 4:3 PAN & SCAN for a full height picture with
both sides trimmed.

• Select 16:9 WIDE if a wide-screen TV is connected to
the DVD player.

• The default setting is 4:3 LETTER BOX.

ANGLE ICON :

• Press ENTER repeatedly to turn Angle icon ON or
OFF.

• The default setting is ON.

AUTO POWER OFF :

• Press ENTER repeatedly to turn Auto Power ON or
OFF.

• The default setting is ON and it will turn the DVD player
to off automatically after 35 minutes of no use.

5

Press SETUP to exit.

NOTES:

• Be sure to press the SETUP button, or the setting will not
work.

QUICK

Language Setting

DVD-V

Language options are not available with some discs.

1

Press SETUP in STOP mode.

2

Press

B to select CUSTOM, then press ENTER.

• CUSTOM mode will appear.

3

Press s or B to select LANGUAGE, then ENTER
to confirm.

4

Press

K or L to select the

below items, then press

ENTER.

AUDIO :

• Sets the audio language.

SUBTITLE :

• Sets the subtitle language.

DISC MENU :

• Sets the language for DVD Menu.

PLAYER MENU :

• Sets the language for the On-Screen display.

5

Press K or L to select a setting, then press
ENTER.

• If OTHER is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press four-digit number to enter the code
for the desired language. (Refer to the language code
list below).

• Only the languages supported by the disc can be
selected.

6

Press SETUP to exit.

NOTE:

• Language Setting for Audio and Subtitle is not available

with some discs. Then use AUDIO and SUBTITLE. Details
are on pages 12.

QUICK

Language Code Language Code Language Code Language Code

Abkhazian 4748
Afar 4747
Afrikaans 4752
Albanian 6563
Amharic 4759
Arabic 4764
Armenian 5471
Assamese 4765
Aymara 4771
Azerbaijani 4772
Bashkir 4847
Basque 5167
Bengali;Bangla 4860
Bhutani 5072
Bihari 4854
Bislama 4855
Breton 4864
Bulgarian 4853
Burmese 5971
Byelorussian 4851

Cambodian 5759
Catalan 4947
Chinese [CHI] 7254
Corsican 4961
Croatian 5464
Czech 4965
Danish [DAN] 5047
Dutch [DUT] 6058
English [ENG] 5160
Esperanto 5161
Estonian 5166

Faroese 5261
Fiji 5256
Finnish [FIN] 5255
French [FRE] 5264

A-B

C-E

F-H

Frisian 5271
Galician 5358
Georgian 5747
German [GER] 5051
Greek [GRE] 5158
Greenlandic 5758
Guarani 5360
Gujarati 5367
Hausa 5447
Hebrew 5569
Hindi 5455
Hungarian [HUN] 5467

Icelandic [ICE] 5565
Indonesian 5560
Interlingua 5547
Interlingue 5551
Inupiak 5557
Irish [IRI] 5347
Italian [ITA] 5566
Japanese [JPN] 5647
Javanese 5669
Kannada 5760
Kashmiri 5765
Kazakh 5757
Kinyarwanda 6469
Kirghiz 5771
Kirundi 6460
Korean [KOR] 5761
Kurdish 5767

Laothian 5861
Latin 5847
Latvian;Lettish 5868
Lingala 5860
Lithuanian 5866
Macedonian 5957
Malagasy 5953

I-K

L-N

Malay 5965
Malayalam 5958
Maltese 5966
Maori 5955
Marathi 5964
Moldavian 5961
Mongolian 5960
Nauru 6047
Nepali 6051
Norwegian [NOR] 6061

Occitan 6149
Oriya 6164
Oromo(Afan) 6159
Panjabi 6247
Pashto;Pushto 6265
Persian 5247
Polish 6258
Portuguese [POR] 6266
Quechua 6367
Rhaeto-Romance 6459
Romanian [RUM] 6461
Russian [RUS] 6467

Samoan 6559
Sangho 6553
Sanskrit 6547
Scots Gaelic 5350
Serbian 6564
Serbo-Croatian 6554
Sesotho 6566
Setswana 6660
Shona 6560
Sindhi 6550
Singhalese 6555
Siswat 6565
Slovak 6557
Slovenian 6558

O-R

S

Somali 6561
Spanish [SPA] 5165
Sundanese 6567
Swahili 6569
Swedish [SWE] 6568

Tagalog 6658
Tajik 6653
Tamil 6647
Tatar 6666
Telugu 6651
Thai 6654
Tibetan 4861
Tigrinya 6655
Tonga 6661
Tsonga 6665
Turkish [TUR] 6664
Turkmen 6657
Twi 6669

Ukrainian 6757
Urdu 6764
Uzbek 6772
Vietnamese 6855
Volapuk 6861
Welsh 4971
Wolof 6961
Xhosa 7054
Yiddish 5655
Yoruba 7161
Zulu 7267

T

U-Z

If you choose a Language that has a 3 letter language code, the code will be displayed every time you change
the Audio or Subtitle language setting on page 12. If you choose any other languages, ‘---’ will be displayed
instead. (3 letter language code is written in bracket.)

–14–

EN

TROUBLESHOOTING GUIDE

If the DVD player does not perform properly when operated as instructed in this Owner's Manual, check the player, consulting
the following checklist.

Problem Solution

No power –Check if the AC power cord is properly connected.
No picture –Check if the TV is switched on.

–Check the video connection

Distorted picture –Sometimes a small amount of picture distortion may appear.

This is not a malfunction.

Completely distorted picture or –Connect DVD player directly to the TV.
black/white picture with DVD –Make sure the disc is compatible with the DVD player.
No sound or distorted sound –Adjust the volume.

–Check that the speakers are connected correctly.

No audio at digital output –Check the digital connections.

–Check if the audio format of the selected audio language matches

your receiver capabilities.

No DTS audio is output –This player does not support DTS audio. This is not a malfunction.
No sound and picture –Check that the VIDEO/AUDIO cable is connected to the correct

device (See Connecting to a TV)

Picture freezes momentarily –Check the disc for fingerprints/scratches and
during playback clean with a soft cloth wiping from center to edge.
Disc can’t be played –Ensure the disc label is facing up.

–Check if the disc is defective by trying another disc.

No return to start-up screen when –Reset the player by switching the player off, then on again.
disc is removed
The player does not respond to –
the remote control –Reduce the distance to the player.

Buttons do not work or player stops –To completely reset the player, unplug the AC
responding cord from the AC outlet for 5-10 seconds.
Player does not respond to some –Operations may not be permitted by the disc.
operating commands during playback. Refer to the instructions of the disc.
DVD player cannot read –Use a commonly available cleaning CD/DVD to
CDs/DVDs clean the lens before sending the DVD player for repair.

Aim the remote control directly at the sensor on the front of the player.

–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.

NOTES:

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual
for details on correct operations.

• Playback from a desired track and random playback are not available during program playback.

–15–

EN

SPECIFICATIONS

Recordable

ReWritable

OUTPUT SIGNAL FORMAT

NTSC color

POWER SOURCE

120 V AC +/- 10%, 60 Hz +/- 0.5%

POWER CONSUMPTION

11 W (standby: 3.9W)

OPERATING TEMPERATURE

41°F (5°C ) to 104°F (40°C)

DIMENSIONS

W:17 ” (435mm)
H : 2 ” (55mm)
D : 8 - 5/16” (211mm)

WEIGHT

Approx 4.0 1bs (1.8kg)

• Designs and specifications are subject to change
without notice.

• If there is a discrepancy between languages, the
default language will be English.

MAINTENANCE

Servicing

• Should your DVD player become inoperative, do not try to correct the problem by yourself. There are no user-service­able parts inside. Turn off, unplug the power cord, and please call our help line at 1-800-256-2487, to locate an
Authorized Service Center.

Cleaning the Cabinet

• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasives.

Cleaning Discs

• When a disc becomes dir ty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular
motion.

• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analogue records.

Cleaning the disc lens

• If the player still does not perform properly when it is operated while referring to the relevant sections and to “TROU­BLESHOOTING GUIDE” in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your dealer or an
Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

Disc Handling

• Use discs which have the following logos on them. (Optical audio digital discs.)

• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

• Always store the disc in its protective case when it is not used.

Make your contribution to the environment!!!

• Used up batteries do not belong in the dust bin.

• You can dispose of them at a collection point for used up batteries or special waste.

Contact your council for details.

–16–

EN

CONTROLES DE OPERACIÓN Y FUNCIONES

PANEL DELANTERO / VISTA TRASERA

1. Botón de la alimentación (POWER)

Púlselo para conectar y desconectar la alimentación.

2. Botón de salto descendente/retroceso rápido
(SKIP H/SEARCH hh)

Púlselo para volver al capítulo o pista anterior durante la
reproducción; manténgalo pulsado durante 1,5
segundos para hacer la búsqueda en retroceso.

3. Botón de reproducción (PLAY)

Inicie la reproducción del contenido del disco.

4. Botón de salto ascendente/avance rápido
(SKIP G/SEARCH gg)

Púlselo para avanzar al capítulo o pista siguiente
durante la reproducción; manténgalo pulsado durante
1,5 segundos para hacer la búsqueda hacia adelante.

5. Botón de parada (STOP)

Detiene la operación del disco.

6. Botón de abertura/cierre (OPEN/CLOSE)

Púlselo para introducir discos en la bandeja o sacarlos de ella.

7. Bandeja de disco (Disc tray)

8. Luz POWER (rojo) (POWER Indicator)

Se enciende cuando la energía está encendido.

9. Luz PLAY (verde) (PLAY Indicator)

Se enciende durante aparato de lectura del disco.

MANDO A DISTANCIA

1. Botón de visualización (DISPLAY)

Muestra el estado actual en la pantalla del televisor con
fines de comprobación.

2. Botón de la alimentación

Púlselo para conectar y desconectar la alimentación.

3. Botón de AUDIO

Púlselo para seleccionar el modo de sonido o el idioma
de audio deseado.

4. Botón de subtítulos (SUBTITLE)

Púlselo para seleccionar el idioma de subtítulos deseado.

5. Botón de ángulos (ANGLE)

Púlselo para cambiar el ángulo de la cámara y ver desde un
ángulo diferente la secuencia que está siendo reproducida.

6. Botón de repetición (REPEAT)

Repite la reproducción del disco, título, capítulo o pista actual.

7. Botón de repetición A-B (REPEAT A-B)

Repite la reproducción de una sección seleccionada.

8. Botón de cancelación (CLEAR)

Repone un ajuste.

9. Botón de pausa (PAUSE)

Hace una pausa en la operación del disco actual.

hh

10.

Hace que la reproducción retroceda rápidamente hasta
un punto deseado.

11. Botón de reproducción (PLAY)

Inicie la reproducción del contenido del disco.

12. Botón de preparación (SETUP)

Púlselo para entrar en el modo de preparación o para
cambiar elementos de preparación.

13. Botón de modo (MODE)

Activa el modo de reproducción programada o el modo
de reproducción aleatoria. Para fijar conexión/desconex­ión de nivel negro y de virtual rodee.

Consulte la figura 3 da la página 6.

Consulte la figura 1, 2 da la página 6.

10. Luz DISC IN (verde) (DISC IN Indicator)

Se enciende cuando un disco está en el jugador de DVD.

11. Cable de alimentación (AC Power Cord)

Conecte a una toma de alimentacion.

12.

Toma de salida de audio digital coaxial (Digital audio out)

Conecte aquí un cable de audio digital coaxial opcional
y a la toma de entrada Audio Digital Coaxial de un
descodificador o receptor de audio.

13.Toma de salida de audio (AUDIO OUT Left/Right)

Conecte los cables de audio suministrados aquí y en
las tomas de entrada de audio de un televisor u otro
equipo de audio.

14. Toma de salida de vídeo (VIDEO OUT)

Conecte aquí el cable de videó amarillo (provisto) y a la
toma de entrada de Videó de TV.

15. Toma de salida de vídeo componente
(COMPONENT VIDEO OUT)

Conecte aquí los cables de videó componente
opcionales y a las tomas de entrada de Videó compo­nente de un televisor.

16. Toma de salida de vídeo S (S-VIDEO OUT)

Conecte aquí un cable de S-Videó opcional y a la toma
de entrada de S-Videó de un televisor.

14. Botón del ZOOM

Amplia parte de una imagen de DVD reproducida.

15. Botón de titulación (TITLE)

Visualiza el menú de títulos.

16. Botón de introducción (ENTER)

Púlselo para aceptar un ajuste.

17. Botón de retorno (RETURN)

Púlselo para volver a la operación anterior.

18. Botones de flechas ( sB

Utilícelos cuando haga ajustes mientras ve la visual­ización en una pantalla de televisión.

19. Botón de MENU Visualiza los menús DVD.

20. Botón de parada (STOP)

Detiene la operación del disco.

gg

21.

Hace que la reproducción avance rápidamente hasta un
punto deseado.

22. Botones SKIP H,G
Presione para saltar capítulos o pistas.

23. 0-9 Botones numéricos

select numbered items in a menu

+10

use this button to enter number 10 and above

24. Botón de abertura/cierre (OPEN/CLOSE)

Púlselo para introducir discos en la bandeja o sacarlos de ella.

25. Botón del modo de búsqueda (SEARCH MODE)

Púlselo para localizar un punto deseado.

KK LL

)

–17–

EN

CONTROLES DE OPERACIÓN Y FUNCIONES

Instalación de las Pilas

1. Abra la tapa del compartimiento de las pilas.

2. Introduzca dos pilas AA con las polaridades colocadas correctamente.

3. Cierre la tapa.

NOTAS

• No mezcle pilas alcalinas y de manganeso.

• No mezcle pilas viejas y nuevas.

CONEXIONES

Conexión a un Televisor Conexión a un Descodificador Dolby

Utilice un cable de vídeo S (de venta en el comercio) en
lugar del cable de vídeo amarillo para disfrutar de imágenes
de más alta calidad.

Consulte la figura 4 de la página 7.

Consulte la figura 5 de la página 7.

Conexión a un Amplificador
Equipado con tomas de Entrada
Digital, Platina MD o Platina DAT

Para hacer las conexiones de audio utilice cables digitales
coaxiales de audio (de venta en el comercio).

Consulte la figura 6 de la página 8.

Digital

Si utiliza este reproductor DVD para reproducir un DVD en
un formato de sonido ambiental Dolby Digital de 5,1 canales,
el reproductor DVD dará salida a un flujo de datos Dolby
Digital desde su toma COAXIAL DIGITAL AUDIO OUT.
Conectando el reproductor a un descodificador Dolby Digital,
usted podrá disfrutar de un ambiente más convincente y
real, con un sonido ambiental potente y de alta calidad de
estándar profesional como el que puede oírse en los cines.
Para hacer las conexiones de audio utilice cables digitales
coaxiales de audio (de venta en el comercio).

Consulte la figura 7 de la página 8.

Conexión a un Televisor
Televisor

Estéreo Que tenga tomas

o a un

Component Video in

Consulte la figura 8 de la página 8.

–18–

EN

REPRODUCCIÓN DE UN DISCO

Reproducción de un DVD de Vídeo o
un CD de Audio

CDDVD-V

Para empezar

Conecte la alimentación del televisor, amplificador y cualquier
otro componente que esté conectado al reproductor DVD.
(Cambie el sistema de entrada para adaptarlo al reproductor
DVD, y compruebe que el volumen del sonido sea correcto.)

1

Pulse el botón POWER.

2

Pulse el botón

• La bandeja de carga del disco se abrirá.

3

Ponga un disco en la bandeja.

• Asegúrese de que el disco esté correctamente asenta­do en el hueco correcto, con el lado de la etiqueta
hacia arriba.

4

Pulse el botón PLAY.

• La bandeja se cerrará automáticamente y la reproduc-

ción empezará desde el primer capítulo o pista del
disco. Necesitará pulsar el botón PLAY sólo cuando la
bandeja haya sido cerrada pulsando el botón
OPEN/CLOSE.

• Cuando reproduzca un DVD que tenga grabado un
menú de títulos, el menú tal vez aparezca en la pan­talla.

5

Pulse el botón STOP para detener la reproducción.

OPEN/CLOSE.

–19–

EN

LIMITED WARRANTY

FUNAI CORP. will repair this Emerson product, free of charge in the USA in the event of defect in materials or
workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the

date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this
warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date

of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE
RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH
THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does
not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED
SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI
AUTHORIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI
CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.

To locate your nearest Emerson Authorized Service Center or for general service procedure, please
call 1-800-256-2487 or write to the following:

FUNAI CORPORATION, INC.

Customer Service

100 North Street; Teterboro, NJ 07608

Tel :[phone]

http://www.funai-corp.com

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

Printed in China

E57T0UD

0VMN03459

★★★★★