Getting started
Installing the battery
1. Open the battery cover.
2. Insert the battery. Be sure to
insert exactly as shown.
3. Close the battery cover.
4. Place the handset on the base
to charge.
Before using for the
first time, charge the
handset for 12-16 hours
Installing the bracket
1. Before installing the bracket, connect the line cord and AC adaptor to
the back of the base (see “Connecting”).
2. Snap the bracket to the back of the base as shown below.
3. Place the base on a flat surface.
Wall Mounting
To mount your telephone on a wall plate (not included), follow the
instructions below:
1. Plug the line cord into a modular phone jack.
2. Align the holes on the base with the mounting studs on the wall plate.
3. Pull the base down onto the studs until the telephone is secure.
wall plate
Connecting
1. Plug one end of the line cord into the jack at the back of the phone’s base,
and the other end into a modular phone jack.
modular
phone jack
AC Outlet
Jack
line cord
insert here
AC adapter
2. Connect the AC adaptor as shown above, and plug into a standard
AC outlet.
3. The handset will display “Searching”, wait until “Handset 1” is displayed.
4. Press on the handset and confirm you hear the dial tone.
Wall Mounting
To mount your telephone on a wall plate (not included), follow the
instructions below:
1. Plug the line cord into a modular phone jack.
2. Align the holes on the base with the mounting studs on the wall plate.
3. Pull the base down onto the studs until the telephone is secure.
wall plate
Using the phone
Speaker
• to use the speakerphone,
press the button,
this can be done before
or during a call
Volume
Redial
volume screen
• during a call or while using
the speakerphone, use the
▲ and ▼ buttons to increase
or decrease the volume
• to redial a number, press and HOLD the button,
then use the ▲ and ▼ buttons to select from a list of
recently dialed numbers, and press to make the call
redial screen
555-555-1111
555-555-2222
555-555-3333
555-555-4444
Option