Emerson EM510 User Manual
WIRELESS HEADSET
Charging the Bluetooth HeadphonesCharging the Bluetooth Headphones Pairing with the SONY PlayStation®3 (PS3™)
1. Connect the charging pin of the USB cable to the charging
socket of the headphones.
2. Connect the other end of the USB cable to either the:
• AC Charger, and plug into a wall (A/C) outlet.
• Computer’s USB port.
3. The RED LED indicator light turns on.
4. The RED LED indicator light shuts o when the headphones
are fully charged (approximately 3 hours).
6. When the phone nds the headphones, conrm by selecting
EM510 from the list.
Bluetooth: Enabled
Paired Devices:
EM510
Select Device:
EM510
Cancel
Pairing the Bluetooth Headphones with a Sony PlayStation 3
SET ACCESSORY to BLUETOOTH on PS3
1. Go to the PS3 main menu, scroll to and select “Settings”.
2. Scroll to and select “Accessory Settings”.
3. Scroll to and select “Manage Bluetooth Devices”.
4. The menu will ask: “The Bluetooth device has not been
registered. Do you want to register it?”, then select “YES”.
Owner’s Manual
Model: EM510
NOTE: The Bluetooth Headphones will emit an intermittent
beep tone and the RED LED will ash when the battery
is running low and requires recharging.
Charging
Socket
Indicator
light
USB port
AC Charger
PC
USB Cable
NOTE: Make sure you charge your headphones for 8 hours
before using it for the rst time.
7. Enter passcode “0000” when prompted by the phone.
Bluetooth: Enabled
Paired Devices:
EM510
Enter numeric passkey
for EM510:
0000
OK
OR depending on which model mobile phone you are trying
to connect the headphones to, it may not be necessary to enter
a passcode and the following message (or similar) may appear
on your phone’s display.
Bluetooth: Enabled
Paired Devices:
EM510
“EM510” would like to pair
with your phone. Would you
like to allow it to pair?
Cancel Pair
REGISTER EM510 to PS3
Put your Bluetooth Headphones into pairing mode.
(See “Pairing the Headphones with a Bluetooth enabled device”)
1. Select “Start Scanning” from the PS3 menu.
2. Once the PS3 has discovered the Headphones, the screen will read
“Select the Bluetooth device to register”, then select “EM510”
3. The PS3 will ask for a passkey. Enter [0000] then select “OK”. Now
press [O] (the PS3 circle button) to get back to the previous menu.
4. Scroll to and select “Audio Device Settings” to change the
“Input Device” to “EM510”.
NOTE: “Input Device” is the microphone, and determines the
method of how how others will hear you speak. By default,
the “Output Device” will now switch to “EM510”.
“Output Device” is the audio, and determines how you
will hear the PS3 audio and others speaking.
To test the connection, speak into the Headphones and you
will see the bars above the “Microphone Level” moving, if not,
repeat the pairing process.
Press “OK” to conrm the new settings. You are now ready to use
the Bluetooth Headphones with your PS3 Entertainment System.
If you would like to hear the PS3 audio through your TV or Audio
System, scroll to “Output Device” and switch to “System Default Device”.
For further assistance with Bluetooth settings on your PS3
please refer to your PS3 instruction manual.
In the boxIn the box
WIRELESS HEADSET
Owner’s Manual
Model: EM510
User GuideBluetooth
Headphones
S M L
Silicone cushions AC Charger
Locations of controlsLocations of controls
Backward
Play/Stop
Forward
Volume Down
Power ON/OFF
Volume Up
USB Charging
Cable
Indicator light
Pairing the headphones with a Bluetooth enabled devicePairing the headphones with a Bluetooth enabled device
1. Make sure the Bluetooth Headphones are turned o.
2. Keep your Bluetooth Headphones and mobile phone within
3 feet of each other during the pairing process.
3. Press down and HOLD the
BLUE lights ash alternately.
4. The headphones are now in Pairing Mode and ready to
connect to your mobile phone.
[ ]
button until the RED and
Power button
(Press down & HOLD)
within 3 feet
Indicator
light
NOTE: To enter the Pairing Mode, you must press down and
HOLD the
5. Set your mobile phone or other Bluetooth enabled device
to search for Bluetooth devices.
Bluetooth: Enabled
Paired Devices:
[ ]
button for approximately 10 seconds.
*Empty *
Searching for devices
ound
1 f
Stop
Select “Pair” to connect the headphones to your phone.
8. Your mobile phone will conrm that the pairing was completed,
and prompt you to accept the connection. Please respond
YES to connect the headphones to your mobile phone. If the
pairing was successful, the headphones’s indicator light ashes a
steady blue.
Bluetooth: Enabled
Paired Devices:
EM510
Confirm connection to
EM510?
YES NO
/
9. When attempting to reconnect the headphones to your mobile
phone, you may see the message below, and your mobile
phone will prompt you to accept the connection request to
the EM510 headphones, and an option not to ask this again.
Please accept the connection, and if you select “Don’t ask this
again”, your phone will automatically accept future connection
requests from your Bluetooth Headphones.
Bluetooth: Enabled
Paired Devices:
EM510
Accept connection request
from EM510?
YES NO
/
Don’t ask this again
NOTE: The screenshots above are typical of many Bluetooth
enabled phones in the market today, and are used to assist
in the explanation of the pairing process. Your mobile phone’s
interface and interaction with the Bluetooth Headphones
may slightly dier from the illustrations above.
Using your Bluetooth HeadphonesUsing your Bluetooth Headphones
Powering ON/OFF
• To turn ON, press down on and HOLD the [ ] button until
the BLUE LED indicator light turns on.
• To turn OFF, press down on and HOLD the [ ] button until
the RED LED indicator light blinks and shuts o.
Answering/Ending a call
• To answer a call, press down on the [ ] button once.
• To end a call, press down on the [ ] button once.
To make a call
Dial the number and press the send button on your mobile
phone, the call is automatically transferred to the headphones.
Adjusting the volume
Push the [ ] button toward [ ] or [ ] to adjust the
volume to the desired level.
NOTE: You may also adjust the volume from your mobile phone’s
volume control.
Rejecting an incoming call
To reject an incoming call, press down on and HOLD the [ ]
button until you hear the conrmation tone.
Redialing the last number called (Dependent
on your phone supporting this feature)
Double press the [ ] button. The last number called will be
redialed.
Voice dial (Dependent on your phone supporting
this feature)
Push the [ ] button towards [ ] until you hear the
conrmation tone, and then say a name from your phone’s
contact list.
Transferring calls
To transfer calls between your Bluetooth Headphones and phone
during a conversation, press and HOLD the [ ] button until
you hear the conrmation tone. To transfer the call back to the
Bluetooth Headphones press and HOLD the [ ] button
once again until you hear the conrmation tone.
Microphone mute
During a conversation, press down on the
you hear the conrmation tone. The microphone of your Bluetooth
Headphones will be mute. While it is in mute mode, your
Bluetooth Headphones will beep every 5 seconds. To cancel mute
mode, press down on the
the conrmation tone.
For added comfort and noise suppression, 3 sets of silicone
cushions are included with your Bluetooth Headphones.
Choose the silicone cushions (S) (M) (L), which t most comfortably
in your ears, and insert them on the Bluetooth Headphones
as shown in the diagram below.
[ ]
[ ]
button until
button again until you hear
S M L
Silicone cushions
Follow the illustrations
to properly wear the
headphones.
Stereo BluetoothStereo Bluetooth
These headphones allow you to listen (in full stereo) and control*
the music on your Bluetooth enabled mobile phone, gaming
console, computer or mp3 player and supports the following
Bluetooth proles:
•
•
•
•
To use the headphones to listen/control music, your Bluetooth
enabled device must support the A2DP and AVRCP proles.
Please refer to the user guide of your Bluetooth enabled device for
more information.
To enjoy wireless music using your Bluetooth Headphones,
press down on the [ ] button of your Bluetooth enabled
device to begin music playback. Once playback has begun, you
can control the music or answer phone calls from the control
buttons of the Bluetooth Headphones (Not all mobile phones
support the control of music using Bluetooth).
Adjusting the volume
Push the [ ] button toward [ ] or [ ] to adjust the
volume to the desired level.
NOTE: You may also adjust the volume from your mobile phone’s
Play/Pause*
Press the [ ] button to pause the music. To resume music
playback, press the [ ] button again.
A2DP - Advanced Audio Distribution Prole
AVRCP - Audio/Video Remote Control Prole
HSP - Headset Prole
HFP - Handsfree Prole
stereo
Music or Chat
Answer calls while listening
to music
Stereo Bluetooth
Listen to & control the music
on your mobile phone*
Computer
Listen to music or chat online
with the built-in microphone
Playing musicPlaying music
volume control.
Skipping or searching songs*
(Dependent on your phone supporting this feature)
Push the [ ] button towards [ ] to go to the
previous song.
Push the [ ] button towards [ ] to go to the next
song.
Backward
Play/Stop
Forward
Volume Down
Power ON/OFF
Volume Up
*Emerson Bluetooth stereo wireless headphones are
compatible with any brand of Bluetooth-enabled phone or
music device that supports Advanced Audio Distribution
Prole (A2DP) and Audio Video Remote Control Prole (AVRCP).
In order for Bluetooth devices to communicate with one another
properly, they must utilize the same Bluetooth prole. To
determine the proles supported by your device (mobile
phone, gaming console, computer or mp3 player), please
refer to the device's user guide.
Certain Bluetooth features including those listed may not
be supported by all compatible Bluetooth-enabled devices,
and/or the functionality of such features may be limited in
certain devices.
Troubleshooting tipsTroubleshooting tips
I Can pair the Bluetooth Headphones with my Bluetooth
device, but I cannot hear any music?
• Make sure your Bluetooth device supports A2DP prole.
My iPhone is paired correctly and I hear music but I cannot
control (play, pause, next song, previous song) the music
using the controls on the Bluetooth Headphones.
• Some older versions of the iPhone only support the
playback of music using Bluetooth, and do not support the
control of the music using Bluetooth. iOS 3.0 versions and
higher will support control of music.
I cannot get the Bluetooth Headphones into Pairing Mode.
Make sure the Bluetooth Headphones are turned o before
•
beginning the pairing process.
Press down and hold the [ ] button until the RED and BLUE
•
lights ash alternately, this will signal that the headphones
are in Pairing Mode, and ready to connect to your mobile
phone.
My mobile phone is not able to pair with the Bluetooth
Headphones.
Make sure that you fully charged the headphones before pairing.
•
Keep your Bluetooth Headphones and mobile phone within 3
•
feet of each other during the pairing process.
Check that your phone’s Bluetooth feature is turned ON.
•
Try repeating the pairing process, see “Pairing the headphones
•
with a Bluetooth enabled device.”
Try removing the battery from your mobile phone for 5
•
minutes. Place the battery back in the phone, power it on, and
retry the pairing process (see “Pairing the headphones”).
After successfully pairing my mobile phone and Bluetooth
Headphones, when I shut my phone and turn it on again, my
headphones did not automatically connect.
Try turning the headphones OFF, and then turning them
•
ON again.
Many mobile phones have an auto reconnect option when rst
•
attempting to reconnect to a newly paired Bluetooth device.
Make sure you accept this option, so that your Bluetooth
Headphones automatically reconnects to your mobile phone;
check the user guide of your mobile phone for more information
regarding this option.
Try unpairing the headphones from your phone, and repeat
•
the pairing procedure.
I hear distortion, and the sound quality is poor.
Try keeping the headphones closer to the Bluetooth enabled device.
•
Check that the battery is charged enough.
•
The sound is very low.
Try adjusting the volume by using the [ ] button on your
•
headphones; make sure the volume on your mobile phone is
turned up as well.
The headphones disconnect from my mobile phone.
On some mobile phones, if you answer an incoming call from the
•
phone instead of the headphones the Bluetooth connection may
be lost. Turn the headphones o and then on to reconnect.
Safety informationSafety information
CAUTION: Do not use this device while operating
a motor vehicle. Although these headphones offer
handsfree operation, they cover both ears of the
user, and are not suitable for use when driving.
• Do not use these headphones while driving.
• Observe all signs in the designated areas where some electronic
devices or RF radio products are required to be switched off.
These could include airplanes, hospitals, blasting areas, and
potentially explosive atmospheres.
FCC and telephone company informationFCC and telephone company information
FCC Part 15:
This equipment has been tested and found to comply with the requirements
for a Class B digital device under Part 15 of the Federal Communications
Commission (FCC) rules. These requirements are intended to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
● Re-orient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
Do not attempt to repair or modify this equipment.
Warning: Changes or modications to this equipment not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Copyright Information:
Trademarks and trade names used in this instruction manual are owned by
their respective companies or organizations.
Unauthorized duplication of any recordings whether downloaded from the
Internet or made from audio CDs is a violation of copyright laws and
international treaties.
The making of unauthorized copies of copy-protected material, may be an
infringement of copyrights and constitute a criminal oense. This equipment
should not be used for such purposes.
Warranty informationWarranty information
Limited Warranty
In the unlikely event that this product is defective, or does
not perform properly, you may within one (1) year from your
original date of purchase return it to the authorized service
center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
• Provide proof of the date of purchase within the package
(Dated bill of sale).
• Prepay all shipping costs to the authorized service center,
and remember to insure your return.
• Include a return shipping address (no P.O. Boxes),
a telephone contact number, and the defective unit within
the package.
• Describe the defect or reason you are returning the product.
Your product will be repaired or replaced, at our option, for the same
or similar model of equal value if examination by the service center
determines this product is defective. Products received damaged
as a result of shipping will require you to le a claim with the carrier.
The shipping address of the authorized service center is:
Southern Telecom, Inc.
ATTN: Customer Service - 2nd Floor
14-C 53rd Street
Brooklyn, NY 11232
Should you have any questions or problems concerning this
product, please contact our customer service department at:
1-877-768-8483 (Toll Free)
Monday - Thursday: 9AM - 5PM (EST)
Friday: 9AM - 3PM (EST)
or
via e-mail at
cs@southerntelecom.com
Warranty service not provided
This warranty does not cover damage resulting from accident,
misuse, abuse, improper installation or operation, lack of reasonable
care, and unauthorized modication. This warranty is voided in
the event any unauthorized person opens, alters or repairs this
product. All products being returned to the authorized service
center for repair must be suitably packaged.
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY
APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE
HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION
GIVEN BY SOUTHERN TELECOM INC. IT’S AGENTS, OR EMPLOYEES
SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE
SCOPE OF THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY
IS THE EXCLUSIVE REMEDY OF THE CONSUMER. SOUTHERN
TELECOM INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER
OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED
BY THE LAWS OF THE STATE OF NEW YORK. EXCEPT TO THE
EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO
THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion nor limitation of incidental
or consequential damages, or limitations on how long an implied
warranty lasts so the above limitations or exclusions may not apply
to you. This warranty gives you specic legal rights, and you
also may have other rights that vary from state to state.
www.emersonphones.com
Distributed by Southern Telecom Inc. Brooklyn, NY 11232
© 2011 Southern Telecom Inc. All rights reserved.
Emerson and the G-Clef logo are registered trademarks of
Emerson Radio Corp. Parsippany, New Jersey USA.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.
SONY PlayStatiion® & PS3™ are either trademarks or registered
trademarks of SONY.
All other trademarks are trademarks of their respective owners.
Loading...