Emerson EM226 User Manual

Ear Hook

Dial the number and press the send button from your

phone, the call is automatically transferred to the headset.

Tap the  [ANSWER/END] button.

You may adjust the volume by using  [Volume Up/Down]

buttons on the headset, or adjust from your phone’s volume

control button.

Answer/Ending a Call

To Make a Call

Adjusting the Volume

3) Set the phone to search for bluetooth devices.

4) When the phone finds the headset, confirm by selecting

EM225/EM226 from the list.

5) Enter passcode “0000” when prompted by the phone.

6) If the pairing was successful, the indicator light flashes

a low steady blue. You are now ready to make and receive

calls.



Answer/End Button



Indicator Light



Charging Socket



Volume Up/Down



Earbud



Microphone



USB Charging Cable



AC Charger

EM225 added.
The handset is now
ready to use

Confirmed

OK

Passkeys:

0000

Confirmation

EM225

OK

EM225

Device Found

select

Search Devices

Bluetooth

select

To power on:

Press and hold the  [ANSWER/END] button until the

blue indicator light turns on.

To power off:

Press and hold the  [ANSWER/END] button until the

indicator light turns red, and shuts off.

Switching the Headset Power ON/OFF

1) Make sure the headset is turned off.

2) Press and hold the  [ANSWER/END] button until the

RED and BLUE lights flash alternately.

*This will require pressing and holding the 

[ANSWER/END]

button longer then when turning the unit ON or OFF.

Pairing the Headset with a Bluetooth
Enabled Phone

1) Connect the USB cable to the charging socket on the

headset.

2) Connect the other end of the USB Cable to the:

• AC Charger, and plug into a wall (A/C) outlet

• Computer’s USB port

3) The indicator light will show RED.

4) RED light shuts off when the unit is 60% charged. To fully

charge the headset 4 hours of charging is required.

Charging the Battery

EM225/EM226

Operating Instructions





USB Charging Cable

PC

AC Charger

Headset

Fits either ear comfortably

LIMITED WARRANTY

In the unlikely event that this product is defective, or does not perform properly, you
may within ninety (90) days from your original date of purchase return it to the
authorized service center for repair or exchange.

TO OBTAIN WARRANTY SERVICE:

- Provide proof of the date of purchase within the package (Dated bill of sale)

- Prepay all shipping costs to the authorized service center, and remember to insure
your return.

- Include a return shipping address (no P.O. Boxes), a telephone contact number, and the
defective unit within the package.

- Describe the defect or reason you are returning the product.

Your product will be repaired or replaced, at our option, for the same or similar model of
equal value if examination by the service center determines this product is defective.
Products received damaged, as a result of shipping will require you to file a claim with
the carrier.

The shipping address of the authorized service center is:

Southern Telecom Inc.

ATTENTION: Returns Department

14-C 53rd Street

Brooklyn, NY 11232

Should you have any questions or problems concerning this product, please contact
our customer service department at:

1-877-768-8483

Mon – Fri: 9AM – 5PM (EST)

or

via e-mail at [e-mail].

To obtain service after the warranty period, please e-mail [e-mail]
with product information, date of purchase and nature of the problem. Customer
service will reply to the e-mail with service instructions.

Warranty service not provided

This warranty does not cover damage resulting from accident, misuse, abuse, improper
installation or operation, lack of reasonable care, and unauthorized modification. This
warranty is voided in the event any unauthorized person opens, alters or repairs this
product. All products being returned to the authorized service center for repair must be
suitably packaged.

Limitation of Warranty:

• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS
PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION
GIVEN BY SOUTHERN TELECOM INC. IT’S AGENTS, OR EMPLOYEES SHALL
CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.

• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER, SOUTHERN TELECOM INC. SHALL NOT
BE LIABLE FOR INCIDETAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED
WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF NEW YORK. EXCEPT TO
THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.

How state law relates to this warranty:

• Some states do not allow the exclusion nor limitation of incidental, consequential
damages, or limitations on how long an implied warranty lasts so the above limitations
or exclusion may not apply to you.

• This warranty gives you specific legal rights, and you also may have other rights that
vary from state to state.

Made In China / Designed In USA

Distributed by: AIT Inc. Brooklyn NY. 11232

Emerson and the G-Clef logo are registered trademarks of Emerson Radio Corp..

Parsippany, New Jersey USA.

©

2008 AIT Inc. All rights reserved.

FCC Compliance

NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasona ble protection against harmful interference in a resid ential install ation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

No special accessory is required to enable the equipment to comply with the emission limits.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received; including interference that may
cause undesired operation.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.
















Right EarLeft Ear