Emerson AV301 User Manual

MODEL : AV301

Quick Set Up Guide

Complete Home Theater System with DVD/CD Player and Digital Tuner

This Quick Set Up Guide will help you get your new Emerson Home Theater System connected, positioned, and operating so
you can begin enjoying movies and music as quickly as possible.

All of the initial default settings have been pre-set for the system to be operated in North America. No further adjustments are
required at this time.

The diagrams below show the important controls on the front panel and remote control that you will use to perform the
operations in this Quick Set Up Guide.

PLAY/PAUSETUNING +/-

POWER

STOP

VOLUME

TUNE/SKIP STOP

PLAY/PAUSE

OPEN/CLOSESTANDBY LED

STANDBY

DVD TUNER AUX

SUB

LANGUAGE TITLE RETURN

TITLE

GO TO

ZOOM

1

23

456

789

>10 0

SET UP

STANDBY

MENU

SLEEP M UTE

CLOSE

MP3

HEADPHONE

VOLUME

TUNER

ANGLE

AUDIO

DISPL AY

N/P

OPEN/

OPEN/CLOSE

STO P

STA- STA

ENTER

+

+

TUN TUN

A- B REPE AT PROG .

ST/MO

SLO W

MEMO

/ / /

PLAY/PAUSE

PLAY/PAUSE

+

AD J/V OL

SEL E CT

TEST

LIST ENING

TONE

ENTER

STOP

TUNING +/- VOLUME +/-

BASIC SETUP AND CONNECTIONS

1. Carefully remove the system from the display carton and confirm that you have the following items:

• Main Unit x 1.

• Satellite Speakers x 5.

• Subwoofer x 1.

• Remote Control x 1.

• Satellite Cables x 5.

• Subwoofer Cable x 1.

• Remote Batteries x 2.

• Video Cable x 1.

• AM and FM Antennas.

• Owner's Manual.

• Rubber Feet x 20.

Save the carton and all packing materials.

2. Install the batteries in the remote control.

3. Place the main unit in the desired location but do not connect the AC power cord at this time.

4. Refer to the following connection diagram.

• Connect all 6 speakers to the color coded terminals on the back of the main unit using the appropriate color coded speaker
cables.

• Connect your TV to the back of the main unit using the supplied video cable (yellow plugs on each end).

• Connect the AM and FM antennas to the back of the main unit.

• Connect the power cords of the main unit and subwoofer to 120V 60 Hz AC household outlets. The STANDBY indicator on

the front of the subwoofer turns red.

• Press the POWER button on the front of the main unit to turn on the main power, then press the STANDBY button on the
remote control to put the system into the Standby mode. The red STANDBY indicator turns 'On'.

Note:

In order to use the remote control to turn the system 'On' and 'Off' the main POWER button on the front panel must be 'On'. We
suggest that this POWER button be left in the 'On' position at all times. If the system will not be used for an extended period -
such as a two week vacation, etc - then you can set the main POWER button back to the 'Off' position.

AM loop antenna
(Included)

Subwoofer

MODEL NO. AV300
POWER S OUR CE AC 120 V~ 60H z
MODEL SY STEM SP300W
PART NO. 16-1379
H.H.SCOTT INC.
9 EN TI N RO A D
PARSIPPANY, NJ 07054-0430
MADE IN CHINA / FABRIOUE EN CHINE

Audio
Input

180Phase 0

AC 120V~60Hz

FM antenna
(Included)

Right Front Speaker Center Speaker Left Front Speaker

AM

FL CFR SLSR

(4 )

Right Surround Speaker

Left Surround Speaker