Emerson ASCO 911 Brochures and Data Sheets

ASCO 911 Remote Control Switch
Remote Control Switch Provides Flexibility And Increases Reliability
The ASCO 911 Remote Control Switch is a proven, time-tested solution for remotely controlling feeder disconnect applications, such as bulk load control and energy management.
Using an ASCO 911 switch reduces wear on the over­current protective devices, provides more flexibility and increases system reliability.
The switch is available for single phase or 3 phase applications in sizes from 100 through 1200 amps.
ASCO 911 Remote Control Switch
Features and Benefits
• Rated for total system loads and can be used on any com­ bination of motor, ballast, and tungsten lighting and general use loads, without de-rating
• Optional 2 or 3 poles with a solid-neutral
• Specied for all load classes up to 600 VAC to its full rating open or closed frame
• Interrupting capacity 600 percent of rated current at 480 VAC 0.4 to 0.5 power factor
• Thermal capacity 20 times full load rating
• Power driven contacts lock in place, no continuous control power consumption
The ASCO 911 Remote Control Switch
ASCO 911 Withstand Current Rating
Switch Rating
(Amps)
100-225A 260-400A
600-1000A
1200A
When Used with Circuit Breakers
WCR with Specific
Circuit Breaker
22,000 42,000 65,000 85,000
WCR with Any
Circuit Breaker
22,000 35,000 50,000 65,000
• Mountable in any position, rugged construction
The 911 Remote Control Switch Ordering Information
ASCO 911 Remote Control Switch Ordering Information
911 Remote Control Switch Catalog
Prefix Product Neutral Phase Poles Amps Voltage Code Accessories Enclosures
H 911 A 3 600 C 1 X C
100
O = 100-225A
E = 260-400A
H = 600-1200A
911
A-
Solid
Neutral
02
03
150 200 225 260 400 600 800
1000
A = 115V* B = 120V*
C = 208V D = 220V F = 240V G = 277V L = 440V N = 480V
1 = CP
Code
X - If Acc.
are ordered
C = Type 1
F = Type 3R
L = Type 12
H = Type 4X
1200
Note: * Voltage Codes A&B only available for 100-400A.
Transfer Switch Terminals for Power Conductors
RC Switch Rating
(Amps
)
100
150
200
225
260
400
600
800
1000
1200
Maximum Number
of Conductors per
Terminal
ONE
ONE
TWO
ONE
TWO
FOUR
Range of Conductor
Sizes
AL - CU AWG
#14 to 1/0
#6 to 350MCM
# 1/0 to 250MCM
#4 to 600MCM
# 1 to 600MCM
Recommended
Tightening
Torque
35-50 In-LB
375 In-LB
600 In-LB
375 In-LB
ASCO 911 Optional Accessories:
• 47 – 2 –Wire control auxiliary control relay
• 48 – 3 – Wire control auxiliary control relay
• 49 – Form 3-control auxiliary control relay
• 14A/B – Auxiliary contacts (1) NO, (1) NC supplied as pair. Rated 20A at 480V
• 52A – Control Line fuse for grounded control voltage
• 52B – Control line fuse for ungrounded control voltage (up to 300V)
• 52C – Control line fuse for ungrounded control voltage (310 to 600V)
• 53B – Hoa 3-Position selector switch with center off position
• 9A/B – (2) indicating lights open/closed
ASCO 911 Dimensions
Switch Rating
(Amps)
100 150-225 260-400
600-1000
1200
Open Frame
7.93W, 4.12D, 14.25H
7.93W, 4.12D, 14.25H 12W, 6.87D, 18.5H
26.93W, 12.69D, 30.94H
26.93W, 12.69D, 30.94H
Dimensions in Inches
Compare, Then Prefer, ASCO
Publication 3236
Type 1 Enclosure Type 3R/12 Enclosure
13W, 4.5D, 18.25H
13W, 4.5D, 24H
18W, 13D, 48H 34W, 20D, 72H 34W, 20D, 87H
20W, 6D, 22H
20W, 6D, 22H 18W, 13D, 48H 34W, 20D, 75H 34W, 20D, 87H
Compare remote control switch products, then prefer the ASCO 911 Remote Control Switch for exibility, reliability and performance.
800-800-ASCO www.ascopower.com 50 Hanover Rd, Florham Park, New Jersey 07932 U.S.A.
February, 2011
©
ASCO 911 Shipping Weights
Switch Rating
(Amps)
100 150-225 260-400 600-800
1000 1200
. .
Approximate Shipping Weights in LBS.
Open Frame
8 9
21 119 131 131
Type 1 Enclosure Type 3R Enclosure
25
30 108 300 300 450
50
62 122 450 450 450
For more information on the ASCO 911 Remote Control Switch:
• Call 800-800-ASCO (2726)
• Email customercare@asco.com
• Visit ascopower.com
• Visit ascoapu.com
Printed in the U.S.A.
Loading...