Emerson 1012 Data Sheet
Ultrasonic Cleaning
OMNI 2000
Cleaning System
Model 1012
Omni Series
The OMNI 2000 cleaning system
by Branson is a fully-configured
ultrasonic cleaning and rinsing system
with a built-in dryer. The equipment
incorporates quality workmanship
and materials without including
unnecessary extras.
The OMNI 2000 offers a full range
of hard-working features, while
occupying only a fraction of the floor
space of comparable systems. All
controls are mounted in a convenient
control box and operate at 24 Volts
for safety.
CLEANING
Precision cleaning is accomplished in
the first chamber. This chamber is
equipped with Branson Series 7000
industrial 40 kHz ultrasonic components
and thermostatically-controlled heat. A
recirculating pump and filter
system to continuously remove particulate material is standard.
RINSING
The OMNI 2000 includes two rinse
chambers in a cascade arrangement.
Rinse water overflows from chamber
three into chamber two. This counterflowing feature provides excellent
rinsing while substantially reducing
water consumption. Chamber two
includes ultrasonic components as standard to assure that all soils and cleaning
chemistry are driven from blind holes
and crevices before the dry cycle.
DRYING
The drying chamber utilizes both
elevated temperature and rapid
air movement to produce dry parts.
The chamber is furnished with a
3" vent duct to facilitate moist air
removal.
Ultrasonic Cleaning
Omni Series
FEATURES & BENEFITS
• Clean, rinse, and dry in a
single unit
• Small footprint minimizes
floor space needs
• Low voltage controls for safety
• Ultrasonics on rinse tank for
superior performance
• Standard pump and filter
extend cleaning bath life
• Convenient working height
• Durable stainless steel
construction
• Easy access to routine
maintenance components
• Convenient control panel
for easy operation
Specifications
Working tank size: 10" x 12" x 10" D
Drain sizes: 1/2" NPT
Cleaning tank temperature: Ambient to 160° F
Recirculation flow rate: 1-3 GPM
Filter retention: 10 microns
Ultrasonic output: 420 watts/tanks
Dryer heat: 3,000 watts
Dryer airflow: 55 cfm
Dryer temperature: 230° F
Input voltage: 208-240V, 1 phase
Americas
Branson Ultrasonics Corp.
41 Eagle Road
Danbury, CT 06813-1961
T: 800-732-9262
F: 203- 796-2250
www.bransonultrasonics.com
Europe
Branson Ultraschall
Niederlassung der Emerson
Technologies GmbH & Co. OHG
Waldstrasse 53-55
63128 Dietzenbach, Germany
T: +49-6074-497-0
F: +49-6074-497-199
www.branson.eu
Basic Design
NOTE: Dimensions are in inches.
Asia
Branson Ultrasonics (Shanghai) Co., Ltd.
758 Rong Le Dong Road
Song Jiang, Shanghai, PRC, 201613
T: 86-21-3781-0588
F: 86-21-5774-5100
www.branson-china.com
OMNI 1012 © Branson Ultrasonics
Corporation 2013
The Emerson logo is a trademark
and service mark of Emerson
Electric Co. Revised and printed
in the U.S.A. 5/13
Loading...