EMERGING DISPLAY ET020003DMU User Manual
EXAMINED BY :
APPROVED BY
:
C
USTOMER
FILE NO
. CAS-51580
EMERGING DISPLAY
ISSUE
: APR.04, 2007
TECHNOLOGIES CORPORATION
A
CCEPTANCE
TOTAL PAGE
VERSION
S
PECIFICATIONS
: 22
: 1
MODEL NO. :
E T 0 2 0 0 0 3 D M U
(RoHS)
FOR MESSRS :
CUSTOMER'S APPROVAL
:
DATE
_____________________________
:
BY
_____________________________
02101300-01-02
E M E R G I N G D I S P L A Y
TECHNOLOGIES CORPORATION
R E C O R D S OF R E V I S I O N
D A T E
REVISED
PAGE
NO.
MODEL NO.
E T 0 2 0 0 0 3 D M U (RoH S)
DOC . FIRST ISSUE
S U M M A R Y
VERSION PAGE
1 0-1
APR.04, 2007
02101300-01-02
E M E R G I N G D I S P L A Y
TECHNOLOGIES CORPORATION
MODEL NO.
E T 0 2 0 0 0 3 D M U (RoH S)
VERSION PAGE
1 0-2
T A B L E O F C O N T E N T S
NO. I T E M PAGE
===============================================================
1.
2. MECHANICAL SPECIFICATIONS
3.
4.
5.
6.
7.
8. DETAIL DRAWING OF DOT MATRIX
9. INTERFACE SIGNAL
10. POWER SUPPLY
11. SPECIFICATION OF AUDACITY ASSURANCE
GENERAL SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
OPTICAL CHARACTERISTICS
OUTLINE DIMENSIONS
BLOCK DIMENSIONS
----------------------------------------------------
--------------------------------------------
---------------------------------------------
-------------------------------------------------
-------------------------------------------------------
---------------------------------------
-------------------------------------
-------------------------------------
---------------------------------------
---------------------------------
-----------------------
1
1
2
3
4
5
6
7
8
9
10 ~ 22
02101300-01-02
E M E R G I N G D I S P L A Y
TECHNOLOGIES CORPORATION
MODEL NO.
E T 0 2 0 0 0 3 D M U (RoH S)
1. GENERAL SPECIFICATIONS
1 . 1 APPLICATION NOTES FOR CONTROLLER/DRIVER
PLEASE REFER TO :
I L I T E K I L I 9 2 2 1 / I L I 9 2 2 2
1 . 2 MATERIAL SAFETY DESCRIPTION
ASSEMBLIES SHALL COMPLY WITH EUROPEAN ROHS REQUIREMENTS,
INCLUDING PROHIBITED MATERIALS/COMPONENTS CONTAINING LEAD,
MERCURY, CADMIUM, HEXAVALENT CHROMIUM, POLYBROMINATED
BIPHENYLS (PBB) AND POLYBROMINATED
DIPHENYL ETHERS (PBDE)
2 . MECHANICAL SPECIFICATIONS
( 1 ) DISPLAY SIZE (inch)
( 2 ) NUMBER OF DOTS
( 3 ) MODULE SIZE
--------------------------------
---------------------------
--------------------------
2.0”
176W * (RGB) * 220H DOTS
38.18W * 53.32H * 3.1(D) mm
(WITHOUT FPC)
VERSION PAGE
1 1
( 4 ) ACTIVE AREA
( 5 ) DOT SIZE
( 6 ) PIXEL SIZE
( 7 ) LCD TYPE
( 8 ) COLOR
( 9 ) VIEWING DIRECTION
( 10 ) BACK LIGHT
-------------------------------------
------------------------------------
-----------------------------------
--------------------------------------
---------------------------------
-----------------------
----------------------------------
31.68W * 39.6H mm (LCD)
0.06W * 0.18H mm
0.18W * 0.18H mm
TFT , TRANSMISSIVE
262K (18BIT)
12 O’CLOCK
LED , COLOR : WHITE
02101300-01-02
E M E R G I N G D I S P L A Y
TECHNOLOGIES CORPORATION
MODEL NO.
E T 0 2 0 0 0 3 D M U (RoH S)
VERSION PAGE
1 2
3 . ABSOLUTE MAXIMUM RATINGS
3 . 1 ELECTRICAL ABSOLUTE MAXIMUM RATINGS.
POWER SUPPLY FOR LOGIC
INPUT VOLTAGE V
STATIC ELECTRICITY
NOTE( 1 ) : LCM SHOULD BE GROUNDED DURING HANDING LCM.
PARAMETER SYMBOL MIN. MAX. UNIT REMARK
VCC -0.3 4.6 V
IOVCC -0.3 4.6 V
VCI -0.3 4.6 V
- 0.3 VCC+0.3 V
I
V NOTE ( 1 )
3 . 2 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS.
OPERATING STORAGE
AMBIENT TEMPERATURE
HUMIDITY NOTE ( 4 ) NOTE ( 4 )
VIBRATION
SHOCK
CORROSIVE GAS NOT ACCEPTABLE NOT ACCEPTABLE
I T E M
MIN. MAX. MIN. MAX.
- 20°C 70°C - 30°C 80°C
( 3G)
2
2
11.76m/S
( 1.2G )
490m/S
( 50G )
2.45m/S
( 0.25G)
29.4m/S
NOTE ( 2 ), ( 3 )
WITHOUT
CONDENSATION
5~20Hz , 1HR
2
20~500Hz(20Hz), 1HR
20~500Hz(500Hz), 1HR
X,Y,Z, TOTAL 3HR
10 m SECONDS
2
XYZ
DIRECTIONS
1 TIME EACH
REMARK
NOTE ( 2 ) :
NOTE ( 3 ) : BACKGROUND COLOR CHANGES SLIGHTLY DEPENDING ON AMBIENT TEMPERATURE
NOTE ( 4 ) :
Ta AT -30°C : 48HR MAX .
80°C : 48HR MAX .
THIS PHENOMENON IS REVERSIBLE.
Ta ≤ 60°C : 90%HR MAX .
Ta > 60°C : ABSOLUTE HUMIDITY MUST BE LOWER THAN THE HUMIDITY OF
90%RH AT 60°C.
02101300-01-02
E M E R G I N G D I S P L A Y
TECHNOLOGIES CORPORATION
4 . ELECTRICAL CHARACTERISTICS
PARAMETER SYMBOL CONDITION MIN. TYP. MAX. UNIT REMARK
INPUT POWER SUPPLY VCC
INTERNAL REFERENCE
VOLTAGE
INTERNAL SIGNAL
VOLTAGE
V
INPUT VOLTAGE
NOTE ( 1 )
V
OUTPUT VOLTAGE
NOTE ( 1 )
OUTPUT CURRENT
NOTE (2)
VOLTAGE OF B/L VF IF=(40 mA)
NOTE ( 1 ) : APPLIED TO TERMINALS , NRESET, VSYNC, HSYNC, DOTCLK, ENABLE, R5~R0,
G5~G0, B5~B0, SDO, SDI, NCS
NOTE ( 2 ) : IC : I
VCC
+ I
VCI
VCI
IOVCC
H LEVEL 0.8VCC
IH
VIL L LEVEL -0.3
H LEVEL 0.8VCC
OH
VOL L LEVEL
IC
IOVCC
+ I
MODEL NO.
E T 0 2 0 0 0 3 D M U (RoH S)
VERSION PAGE
1 3
Ta = 25 °C
2.5 2.8 3.3 V
2.5 2.8 3.3 V
2.5 2.8 3.3 V
VCC V
0.2VCC V
V
( 4 ) ( 6 ) mA
(3.3) (4.0) V
0.2VCC V
02101300-01-02
E M E R G I N G D I S P L A Y
TECHNOLOGIES CORPORATION
5 . OPTICAL CHARACTERISTICS (NOTE1)
VIEWING ANGLE
CONTRAST RATIO
RESPONSE TIME
THE BRIGHTNESS
OF MODULE
COLOR OF
CIE
COORDINATE
THE BRIGHTNESS OF
UNIFORMITY
NOTE (1) : THE BRIGHTNESS UNIFORMITY CALCULATE METHOD
I T E M SYMBOL CONDITION MIN. TYP. MAX. UNIT REMARK
y+
θ
y-
θ
x-
θ
x+
θ
CR
t r ( rise )
t f ( fall )
B
WHITE
RED
GREEN
BLUE
1 ×
−
−
AVERAGE
X (0.290) (0.310) (0.330)
Y (0.312) (0.341) (0.361)
X (0.635) (0.655) (0.675)
Y (0.309) (0.329) (0.349)
X (0.292) (0.312) (0.332)
Y (0.555) (0.575) (0.595)
X (0.114) (0.134) (0.154)
Y
)MINIMUNMAXIMUN(
MODEL NO
E T 0 2 0 0 0 3 D M U (RoH S)
x = 0
θ
CR ≥ 10
y = 0
θ
x = θy = 0°
θ
x = θy = 0°
θ
x = θy = 0°
θ
VIEWING
NORMAL AUNLE
x = 0°
θ
y = 0°
θ
IF =(40 mA) (70) (75)
%100
.
(55) (60)
°
(15) (20)
(40) (45)
°
(40) (45)
150 200
200 250
(0.115) (0.135) (0.155)
(12) (16)
(18) (24)
VERSION PAGE
1 4
Ta = 2 5 °C
deg .
msec
cd/m
2
%
NOTE(1)
02101300-01-02
E M E R G I N G D I S P L A Y
N
TECHNOLOGIES CORPORATION
6 . OUTLINE DIMENSIONS
MODEL NO.
E T 0 2 0 0 0 3 D M U (RoH S)
VERSION PAGE
1 5
UNIT : mm
SCALE : NTS
OT SPECIFIED TOLERANCE IS ± 0.3
02101300-01-02
Loading...