ELRO CZ60RIP11S Quick Start Manual

CZ60RIP11S

CAMERA SECURITY SET

COLOR NIGHT VISION

Quick Start Guide

EN

Symbols:

Recycling and disposal: The WEEE symbol (a) means that this product and baeries must be
disposed separately from other household waste. When it reaches its end of life, take it to a
designated waste collecon point in your area to guarantee a safe disposal or recycling. Protect the
environment, human health and natural resources! Read the manual (b) before use and store it in a
safe place for future use and maintenance.

ELRO Europe | www.elro.eu
Postbus 9607 - Box E800
1006 GC Amsterdam - The Netherlands

ü

GARANTUEE

Visit www.elro.eu

(a) (b)

V3

Home is not a place, it’s a feeling

General safety instrucons

All warranty claims will be void in the event of damage or loss caused by failure to follow this
operaon instrucons/quick start guide. We accept no liability for personal injury or damage to
property caused by improper use or failure to observe the safety instrucons. In these cases, the
warranty will lapse. For safety and authorisaon purposes, it is not permied to modify or convert
the device.

1. Keep all parts out of reach of young children.

2. Do not install near other electronic equipment such as computers, TV, VCRs, as this can
transmit interference.

3. Do not disassemble or open.

4. Do not spray water on the indoor unit.

5. Do not overload wall outlets or extension cords.

6. Do not drop or shock the system.

7. Unplug the power cord from the wall outlet when the system has not been operang for a long
period of me is used.

8. Do not place an open flame (e.g. burning candles) on/near the system.

9. Do not place water-filled objects (e.g. vases) on/near the system.

10. Do not cover venlaon holes.

11. If supplied, keep baeries out of the reach of children. Baeries not swallow. If a cell or baery
is swallowed, immediately contact a physician. Cauon, risk of explosion if Baery is replaced
by an incorrect type. Dispose of used baeries according to the instrucons

Maintenance

The units are maintenance-free, so never open them. The guarantee is void when the unit is
opened. Clean the outside of the unit only with a so, dry cloth or brush. Prior to cleaning, the
units must be removed from all sources of voltage. Do not use carboxylic cleaning agents, petrol,
alcohol or the like. These will damage the surfaces of the units. In addion, the vapours are
dangerous to health and explosive. Do not use tools with sharp edges, screwdrivers, metal brushes
or the like for cleaning. General warning: Protect the baeries (if supplied) from fire, excessive heat
and sunlight.

Home is not a place, it’s a feelingHome is not a place, it’s a feelingHome is not a place, it’s a feeling

-1-

Introducon

Congratulaons with your new ELRO camera Set, featuring 9“ (23 cm) colour screen plus PIR
acvated 1080P Full HD Resoluon camera with white light LEDs to give Color Night Vison including
SD Card recording feature. We want that you enjoy this ELRO product without having to read
extensive paperwork, so this quick start guide will help you to get started, make camera and
monitor work together and indicate the most important features. You will also learn which APP you
can use for remote access. If you need more detailed informaon, visit our website www.elro.eu for
a more detailed manual, where all features of the system and the APP are described in full!

Besides the mounng materials (dowels and srews), the set contains the following parts:
* Monitor 9“/23cm
* 1080P HD wireless camera
* AC adaptor 9V (camera)
* AC adaptor 5V (monitor)
* Network cable
* Quick Start Guide

Up to 3 addional cameras can be added to this 4-Channel sytem. The compabel extra camera for
this kit is: 1080P HD Color Night Vision CameraCC60RXX11

Get started

(Default password 000000)

1. Connect the 9V power adapter tot he camera and plug it into power

2. Connect the 5V power adapter into the monitor and plug it into power. To turn ON and OFF the
monitor, push and hold the power buon that is located in the middle on top of the monitor
for at least 5 seconds! Pushing this buon shortly will enter the Scan Mode to find paired
cameras.

3. The camera is already pre-paired to the monitor; if you find this not working, or you want to
change to another channel, go to:

Screen menu General Sengs Camera Sengs Pairing

Choose and tab the channel to which you want to add or change the camera to and follow the
on-screen instrucon to press the „pair“ buon at the back of the camera within 30 seconds!
You will now see the camera picture on the screen.

Before Mounng the camera to the wall, check if the intended mounng posion gives the
wanted surveillance area and has good wireless connecon to the monitor.

-2-

1. SIGNAL INDICATOR

Shows how strong the camera's signal is.

2. SD CARD

SD card is inserted into the monitor.
Blue; recording space is available.
Red; SD card is full.

3. NEW RECORD INDICATOR

New recordings are saved on the SD card.

4. RECORDING INDICATOR

Recording is in progress.

5. NETWORK STATUS INDICATOR

Green; connected to internet.
Yellow; not connected to the internet.
Red; no connecon monitor and camera

6. LED LIGHT CONTROL INDICATOR

White LED light on for Color Night Vision mode.

7. SD CARD OVERWRITE

Overwrite files when SD-card is full.

8. CHANNEL INDICATOR

Displays the current channel you are viewing.

9. BATTERY INDICATOR

Flashing Red; low baery
Green; full baery
Flashing Green; charging baery

10. ZOOM INDICATOR

Tap 1 of the 5 areas.
Tap the icon again to exit Zoom mode.

11. VOLUME INDICATOR

Tap + or - to raise or lower the volume.

12 TALK BACK INDICATOR

Press and hold to talk back through the camera.

13. NEW DOWNLOAD

Displays if new firmware is available.

14. SEQUENCE INDICATOR

Auto switch mode; it will change channels automacally.

15. CHANGE CHANNEL

Tap this icon to manually change channels.

16. MOTION RECORDING INDICATOR

Blue; automac recording OFF.
Red; automac recording ON.

17. POP-UP MENU TAB

Tap to access the pop up menu system.

VOLUME

- 5 +

SEQ

Explanaon monitor icons ELRO Monitoring App

1

1. Download and install the free
ELRO Monitoring app.

(App Store / Google Playstore)

2. Your Monitor must be connected
to your home router with included
network cable!

3. For adding a camera, just follow
the instrucons from the APP and
use either the UID below the QR­ Code on the monitor or you
simply scan the QR-Code itself.

NKCZEJJ11L3MB272111A

QR-code

UID-code

Add Device

Device Setting

Scan Search

Name: ELRO Monitoring

000000

UID:

OK Cancel

NKCZEJJ11L3MB272111A

Password:

Enter the Default password here
000000 in. You can later in the app
Create your own password.